Hello Steve,
use the following configuration for the transport and bind this
transport to the trunk:
[transport_name]
type=transport
protocol=tls
bind=192.168.13.24 ; your bind IP
ca_list_file=/etc/pki/tls/certs/ca-bundle.crt
; method=tlsv1_2
verify_server=yes
allow_reload=no
;tos=0xb8
;cos=3
external_media_address=your.ext.host.name ; hostname pointing to your
ext. IP
external_signaling_address=your.ext.host.name ; hostname pointing to
your ext. IP
local_net=192.168.0.0/24 # your local net
Regards
Michael
On 07.04.23 at 17:25 Steve Matzura wrote:
I want to configure communication with my phone provider using TLS for
all the obvious reasons. Since I'm behind a firewall, I'll be needing to
do it with NAT. There are examples of UDP plus NAT in pjsip.conf, but
none for TLS plus NAT. Would it be correct to set up the TLS transport
stanza to look like the [transport-udp-nat] stanza example, replacing
UDP with TLS in lines like 'transport=tls' and 'protocol=tls', and
including the lines for local_net, external_media_address and
external_signaling_address?
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users