hi all, i am getting crazy with my TE410P - it won't work
now we already think that the only thing which can be wrong is the cable. At our telecom endpoint we have 1-2 tx, 4-5 rx So - which cable do i need to get it working Already tried a cross over cable 1-2 -> 4-5 / 4-5 -> 1-2 (with this cable nothing works -> red alarm on both ends) Also a normal cable 1-2 -> 1-2 / 4-5 -> 4-5 (with this cable the telecom endpoint gets a signal - but it seems to be the wrong coding/framing - but the TE410P is still on red alarm) so, could it be that it will need a: 4-5 -> 4-5, 1-2 -> 7-8 ? (never heard about something like this) my zaptel.conf is: ---------------------------- span=1,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=at defaultzone=at ---------------------------- as you can see i am located in austria - my telco is telekom Austria thanks for any help best regards Wolfi _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users