Hi- Only pins 1-2 and 4-5 are used, so one of the two cables should work. (probably the straight through cable)
On your zaptel, you should use the phone company as the source for asterisk's internal clock, like: span=1,1,0,ccs,hdb3,crc4 (But I don't think this would make a difference on the red alarm). Also, try removing crc4 at the end. Did you do the following before starting asterisk? modprobe -v wct4xxp sleep 2 ztcfg -vv When you do these commands, is there an error? Also, in your /etc/asterisk/zapata, did you specify: signalling=pri_cpe ? Regards Scott Stingel Scott M. Stingel President, Emerging Voice Technology, Inc. Palo Alto California & London England www.evtmedia.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wolfgang Pichler Sent: Friday, July 02, 2004 4:42 AM To: Asterisk-Users Mailinglist Subject: [Asterisk-Users] TE410P PINS hi all, i am getting crazy with my TE410P - it won't work now we already think that the only thing which can be wrong is the cable. At our telecom endpoint we have 1-2 tx, 4-5 rx So - which cable do i need to get it working Already tried a cross over cable 1-2 -> 4-5 / 4-5 -> 1-2 (with this cable nothing works -> red alarm on both ends) Also a normal cable 1-2 -> 1-2 / 4-5 -> 4-5 (with this cable the telecom endpoint gets a signal - but it seems to be the wrong coding/framing - but the TE410P is still on red alarm) so, could it be that it will need a: 4-5 -> 4-5, 1-2 -> 7-8 ? (never heard about something like this) my zaptel.conf is: ---------------------------- span=1,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=at defaultzone=at ---------------------------- as you can see i am located in austria - my telco is telekom Austria thanks for any help best regards Wolfi _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users