On 26/01/2024 15:49, Drew Weaver via cisco-nsp wrote:
Hello,
I just have a general gripe that I want to share regarding the ASR9902 and
since there is nobody to talk to at Cisco about any of this anymore, I figured
I would just share it here.
This is an acceptable configuration:
1x100GE, 1x100GE, 4x25GE, 10x10GE
But this is not:
1x100GE, 1x100GE, 1x100GE,10x10GE
Think about that for a moment.
Same story for any dual rate card:
https://www.cisco.com/c/en/us/td/docs/iosxr/asr9000/hardware-install/ethernet-line-card-installation-guide/b-asr9k-ethernt-line-card-install-guide/b-asr9k-ethernt-line-card-install-guide_chapter_010.html#id_45620
:-(
-Hank
Thanks,
-Drew
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
