On 16.08.2006, at 10:53, fred wrote:
I've played with code that enumerate usb devices,etc..but haven't
figured
how to associate the usb device
with a /dev/ttyUSBnn device properly/correctly or how? ...don't
know enough
yet
eg modem on device
ls /proc/bus/usb/002
001 002
the falcom modem is the 002 device,
yet the serial device is attached to /dev/ttyUSB0.......
This is done by the USB driver. Kannel just uses a serial port given
by its config file.
So if you got a USB device which has a serial port, then its up to
the USB device driver to declare which port it will use.
So this is not really kannel question
