Andy, I have a PowerPoint paper around here somewhere which I downloaded on setting up a TS-2000 for KSS, a lot easier then I had setting up my TS-480. >From the top of my head the TS-2000 can do VHF/UHF as well which means that >you can do everything internally, no need to connect a TM-D700 (as in my case).
I have found it now but it's just over 5Mb so here is the link for you to download. http://www.hamstation.com/gallery/Kenwood%20Sky%20Command%20PPT.ppt Hopefully this should give you the info you need? If you have any problems with getting this file drop me a note and I'll send you my copy. CUL Kevin, ZL1KFM. ----- Original Message ----- From: obrienaj To: digitalradio@yahoogroups.com Sent: Monday, October 05, 2009 12:52 AM Subject: [digitalradio] Using TS2000, D700A and Sky Command for digital modes ? I am planning on attempting to access a local 2M FM repeater that has started using FL-digi for a digital mode net. Since I do not have a 2M antenna at home other than the dual-band 2M/70cm mobile antenna on my car, I thought I might try the Sky Command capabilities that my rigs have. Anyone already done this and perhaps have the set-up files that can be shared ? This would involve operating from my shack with PC and Kenwood TS2000 , using a UHF simplex frequency to transmit to my vehicle in the drive-way. In the vehicle a Kenwood D700A would pick up the UHF simplex transmission and link it to the 2M side of the DM700A for access to the 2M repeater. If someone does have the files all set for this, could you let me know (or upload to the files section here) , it would save me a lot of manual searching and eye squinting. Andy K3UK