I explained my problem earlier this thread. I added the routes in the endian
GUI. But Endian does not set routes, it uses iptables. And that does not work
for ICMP as it seems, at least not on the endian.
If I set the routes manually, it works as expected.
Best regards,
Marco
Von: Jonathan Lessa [mailto:jonathanle...@gmail.com]
Gesendet: Freitag, 2. August 2013 19:59
An: efw-user@lists.sourceforge.net
Betreff: Re: [Efw-user] Routing and ICMP
But you need to add the route to have communication with another network.
What is the problem?
If your network gateway is the Endian is it then that should be the routes to
other networks.
2013/8/2 Marco Gabriel - inett GmbH <mgabr...@inett.de
<mailto:mgabr...@inett.de> >
Understood. I already tried to create a specific rule for ICMP traffic within
the firewall (exactly at policy based routing). It showed me ICMP 8 and ICMP 30
to allow, but that didn’t work either.
The only thing that worked so far was adding a route.
Marco
Von: Jonathan Lessa [mailto:jonathanle...@gmail.com
<mailto:jonathanle...@gmail.com> ]
Gesendet: Freitag, 2. August 2013 17:33
An: efw-user@lists.sourceforge.net <mailto:efw-user@lists.sourceforge.net>
Betreff: Re: [Efw-user] Routing and ICMP
But the issue is not the area in itself, but when do you configure a rule to
redirect the Endian already takes care of creating a rule in the firewall to
release this communication. What I asked was to test the firewall to create a
rule allowing ICMP between these networks.
2013/8/2 Marco Gabriel - inett GmbH <mgabr...@inett.de
<mailto:mgabr...@inett.de> >
There are two LANs, connected through two cisco boxes. LAN1 contains client and
cisco box 1, LAN2 contains endian, server and cisco box 2. There is no need to
play with the zones as everything for LAN1 should be routed through the cisco
box 2. And that works for all services but ICMP.
Best regards,
Marco
Von: Jonathan Lessa [mailto:jonathanle...@gmail.com
<mailto:jonathanle...@gmail.com> ]
Gesendet: Freitag, 2. August 2013 17:23
An: efw-user@lists.sourceforge.net <mailto:efw-user@lists.sourceforge.net>
Betreff: Re: [Efw-user] Routing and ICMP
I understood that all involved were on the same LAN green, but in this case
they are not.
Outside the routing would be interesting to create a rule in the firewall
between zones. Releasing the ping between the 192.168.10.0/24
<http://192.168.10.0/24> network and the Green Zone.
------------------------------------------------------------------------------
Get your SQL database under version control now!
Version control is standard for application code, but databases havent
caught up. So what steps can you take to put your SQL databases under
version control? Why should you start doing it? Read more to find out.
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
_______________________________________________
Efw-user mailing list
Efw-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/efw-user
