Rick,
Apply some pressure between the board and the front panel metalwork -
Squeeze with thumb and fingers while tightening the knurled nut with the
other hand. Tighten until the washer is tight. That method will do no
harm.
73,
Don W3FPR
On 12/28/2012 5:51 PM, Rich wrote:
Hi all
I had nearly finished assembly when I picked up the unit and heard a rattle,
process of elimination I found it in the front head unit and its the flat
washer between the phones socket and the front panel plate itself. Even with
the knurled nut screwed on the front, the flat washer is still loose - is that
right??
With everything done up e.g. the DSP board etc it doesn't push it all together
enough.
Just want to see if this is how it should be?
The page in the guide is 41,
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
