Anyone who does such testing should also include in the report(s) the
power supply voltage as seen by the K3S alternate VFO B display.
Lower power supply voltages will have worse IMD than voltages that are
higher.
Running the K3 or K3S with a power supply voltage above 14.3 volts will
improve the IMD substantially.
73,
Don W3FPR
On 9/1/2015 1:44 PM, Ian White wrote:
I found very much the same as Rick did, with a completely different test
setup (SDR-IQ).
The details vary somewhat with frequency and supply voltage but the
three main features reported by Rick remain the same:
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
