Is vfo b locked?
---- http://www.elecraft.com On Oct 24, 2009, at 2:19 AM, DC1RS <rs...@hotmail.com> wrote: > > Hi Wayne, > > something seems not to work here with the cat commands. > When I send the cat commands only VFO A changes by 10Hz steps, > whether I use > UPn;/UPBn; or DNn;/DNBn. No change in VFO B. The other commands do > what they > supposed to. > Am I missing something? > > 73 de Roland, DC1RS > > > > wayne burdick wrote: >> >> Hi all, >> >> In a recent discussion about SPLIT, many proposals were made (too >> many :) Others argued for no change. >> >> With this in mind, we've created a new "switch macro" feature. It >> allows you to create your own variation on SPLIT -- or any other >> radio >> function -- and execute it with a single switch press. In effect, >> you'll be creating your own custom firmware for the K3 that automates >> control sequences you use most. >> >> Example #1 (SPLIT+2): >> >> A>B >> A>B >> SPLIT >> VFO B up 2 >> RIT and XIT off >> >> Example #2 (WEAKSIG): >> >> Sub ON >> Diversity mode >> main/sub preamps on >> 200-Hz bandwidth >> center passband >> >> Many other combinations are possible, limited only by the K3's >> remote- >> control command set and the macro length limit (presently 56 bytes). >> You'll be able to set VFO frequencies or RIT/XIT offsets, adjust gain >> or filter controls, and virtually "tap" or "hold" nearly any control >> on the radio. >> >> First, you enter a sequence of K3 control commands into one or more >> macros using K3 Utility, which can store them in the K3's EEPROM. >> Next, you assign the macros to any of the K3's 10 programmable >> function switches (PF1, PF2, M1-M4 tap, or M1-M4 hold) using the new >> MACRO menu entry. >> >> After that, activating the switch will perform the desired functions, >> and the name of the macro will flash on VFO B as a reminder (e.g., >> "SPLIT+2"). >> >> This feature is presently being evaluated by our field testers. But >> we'd like to invite more of you to try it and give us feedback. >> >> If you're interested, please send email directly to n6kr at elecraft >> dot com. >> >> 73, >> Wayne >> N6KR >> >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> > > > ----- > K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K, > KFL3A-400, > KAT3, KXV3A > -- > View this message in context: > http://n2.nabble.com/NEW-K3-Front-Panel-Switch-Customization-create-your-own-SPLIT-function-etc-tp3881481p3883368.html > Sent from the [K3] mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
