> Can you try the RTAI kernel? > wget http://www.linuxcnc.org/temp/linux-image-4.14.148-rtai-amd64.deb
oops, sorry, missed that. i mean i did try the rtai-patched kernel before... but anyway. can't repeat it on N3150 now, used i7 M 620 instead, debian 9 it boots, hangs for a while with a blank screen before X logins is displayed. the resolution is set to 1024x768 instead of the panel's native 1440x900. hangs on shutdown waiting for a few minutes for stopped tasks. otherwise seems to be ok. this is a few random lines from Xorg.log with the RTAI kernel: [ 63.307] (II) VESA(0): VESA VBE PanelID read successfully [ 63.308] (II) VESA(0): PanelID returned panel resolution 1440x900 [ 63.308] (II) VESA(0): Searching for matching VESA mode(s): [ 63.507] *Mode: 118 (1024x768) [ 63.508] *Mode: 112 (640x480) [ 63.510] *Mode: 115 (800x600) [ 63.633] (II) VESA(0): Setting up VESA Mode 0x118 (1024x768) preempt_rt: [ 247.039] (II) modeset(0): EDID for output LVDS-1 [ 247.041] (II) modeset(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1600 h_border: 0 [ 247.041] (II) modeset(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0 [ 247.041] (II) modeset(0): Printing probed modes for output LVDS-1 [ 247.041] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 -hsync -vsync (55.5 kHz eP) [ 247.058] (II) modeset(0): Printing probed modes for output VGA-1 [ 247.058] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 247.061] (II) modeset(0): Output LVDS-1 using initial mode 1440x900 +0+0 [ 247.061] (II) modeset(0): Output VGA-1 using initial mode 1280x1024 +1440+0 [ 247.207] (II) modeset(0): [DRI2] Setup complete [ 247.208] (II) modeset(0): [DRI2] DRI driver: i965 [ 247.208] (II) modeset(0): [DRI2] VDPAU driver: i965 /dmitry _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
