Hey guys I just took this little video today as one of my machines was running.
It's basically a haas vf3 but maybe a slightly heavier machine Making 200 of these parts. Takes 13min per part to make 1 finished part. So about 50min cycle time. There is not many videos on the Internet showing linuxcnc getting used in an actual production environment. So I try to show videos of how good it is. This job has about 10 different tools and lots of cool stuff to make it run smoothly. And it also automatically measures the tools when needed. As I am setting up for a job. I have 4 air blast units under sprockets that blast the chips out when cutting the inside square. I just did a quick job and wired the solenoids into a few spare outputs on the 7i84 mesa card. https://youtu.be/49G4X1Nfmu0?si=wFrkGbNTekLQODr6 Should have 3 machines running at once tomorrow... fun times Cheers andrew _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
