On Fri, 2008-05-30 at 17:12 +0000, Manfredi Leto wrote: > I'm running Ubuntu 6.06 + EMC2 on a Commel mini-ITX LV-602B I bought on ebay > for 50Eur some time ago: > > http://www.commell-sys.com/Product/SBC/LV-602.htm > > with 256 Mb of RAM and a PIII at 1.1 GHz it works Great! Onboard video works > very well and I never got a realtime error with this board. > > Greetings, > > Manfredi > > > My websites: www.m24-pro.com www.emc2cnc.altervista.org
It's the C3 processors that seem to have the problem. A lack of PCI slots makes ITX less desirable for me, plus micro-ATX boards tend to be much cheaper and not that much bigger. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC/EMC CNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/EMC CNC) ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users