On Thu, 11 Sep 2008, Eric H. Johnson wrote:
> Date: Thu, 11 Sep 2008 20:57:14 -0400
> From: Eric H. Johnson <[EMAIL PROTECTED]>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <emc-users@lists.sourceforge.net>
> To: "'Enhanced Machine Controller (EMC)'" <emc-users@lists.sourceforge.net>
> Subject: Re: [Emc-users] Another problem with Hostmot2 and m5i20
>
> Sebastian,
>
>>> Next I'd want to check the electrical state of the IO pins. With
> SVST8_4, pwmgen.00 appears on pins 15 (PWM), 19 (Dir), and 23 (Not Enable).
> Bust out a voltmeter and carefully hook it to pin 23. Then twiddle
> pwmgen.00.enable high and low and see if the voltage on pin 23 varies as
> expected (0V when .enable is 1). <<
>
> The enable pin appears to work properly. When enable is set to false pin 23
> is high, when enable is true pin 23 is low.
>
> Regards,
> Eric
>
Whats the state of the PWM pin?
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
