Why does it matter how other controls work? John
On 5/21/2012 8:04 PM, Terry Christophersen wrote: >> I never use the H-number, it is only useful for applying the offset of > It may be not useful in LinuxCNC but I guarentee you 90% + of the mill > programs in the world use it (Fanuc has to have it) also the Dxx > If you omit the D on Fanuc no offset will be applied to G41,G42 > > Terry > > > > > ----- Original Message ----- > From: andy pugh<bodge...@gmail.com> > To: Enhanced Machine Controller (EMC)<emc-users@lists.sourceforge.net> > Cc: > Sent: Monday, May 21, 2012 5:57 PM > Subject: Re: [Emc-users] Tool Offsets > > On 21 May 2012 20:51, Eric H. Johnson<ejohn...@camalytics.com> wrote: > >> T3 M6 >> G43 H3 > I never use the H-number, it is only useful for applying the offset of > a non-loaded tool to the loaded tool. > Though I doubt that is your problem. > ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users