On Mon, 25 Apr 2022 at 17:14, Earl Weaver <weaverst...@frontier.com> wrote:
> I have noticed on developer mailing list work is being done on a custom > homing module. home.comp > https://github.com/LinuxCNC/linuxcnc/commits/dgarr/homebase > Is this something I could utilize with my existing setup? Not with the existing config, as it does not use the LinuxCNC motion module. > Would my GladeVCP still work if I do any updates, since the switch to > python3? > (I am using 2.9 master, before the python3 updates.) It ought to. But I am not 100% sure about the Python code inside the GUI. (But I think it is simple enough that it would work in either version) > A combination of motion.comp, home.com, and a custom press.com? Something like that. Though the more I think on it the less simple it becomes. Anyway, I just posted an updated press.comp to the forum. Might work better (but might not...) -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users