Re: [expert] new memory 512MB module (total 1024MB) and linux won't boot and also installer doesn't work anymore

Sun, 09 Mar 2003 12:01:33 -0800 

Some more fiddling:

Recompiled the kernel without devfs and since it seemed to insist that APIC
and ACPI things found though the lilo said "noapic acpi=off pci=biosirq",
I've changed my lilo so it would let apic and acpi=on. I also removed the
pci=biosirq. The result is that at boot it doesn't crash anymore, but it
displays nothing. I left it for a few minutes and I logged in "blindly"
(still no display) and started X. Funny. X started ok and display came back.
I checked /var/log/dmesg and here are the results as attachment. Also my new
lilo.conf (I used the latest available kernel from mandrake 15mdk-mm). Can
anyone understand any of this? I see also a "BIOS BUG" thing in the oops
results. What does that mean? Any other usefull info in there about the
origin of the crash?

Best regards and thx for all the patience and help. :)
Adrian

Linux version 2.4.21-0.15mm-mdkcustom ([EMAIL PROTECTED]) (gcc version 3.2.2 (Mandrake 
Linux 9.1 3.2.2-3mdk)) #10 Sun Mar 9 20:19:51 CET 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
 BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
 BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 262140
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32764 pages.
ACPI: RSDP (v000 ASUS                       ) @ 0x000f5fd0
ACPI: RSDT (v001 ASUS   A7V8X    16944.11825) @ 0x3fffc000
ACPI: FADT (v001 ASUS   A7V8X    16944.11825) @ 0x3fffc0ae
ACPI: T? (v001 ASUS   A7V8X    16944.11825) @ 0x3fffc02c
ACPI: DSDT (v001   ASUS A7V8X    00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Kernel command line: BOOT_IMAGE=2421-015mm ro root=309 hdd=ide-scsi acpi=on
ide_setup: hdd=ide-scsi
Found and enabled local APIC!
Initializing CPU#0
Detected 2000.121 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3984.58 BogoMIPS
Memory: 1032752k/1048560k available (1544k kernel code, 15420k reserved, 1097k data, 
140k init, 131056k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(TM) XP 2400+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2000.1599 MHz.
..... host bus clock speed is 266.6878 MHz.
cpu: 0, clocks: 2666878, slice: 1333439
CPU0<T0:2666864,T1:1333424,D:1,S:1333439,C:2666878>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030122
PCI: PCI BIOS revision 2.10 entry at 0xf1720, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 0
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
vesafb: abort, cannot ioremap video memory 0x8000000 @ 0xf0000000
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ 
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0x9800-0x9807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x9808-0x980f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L080AVVA07-0, ATA DISK drive
hda: DMA disabled
blk: queue c03eb100, I/O limit 4095Mb (mask 0xffffffff)
hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 012, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-48125S, ATAPI CD/DVD-ROM drive
hdc: DMA disabled
hdd: DMA disabled
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=10011/255/63, UDMA(100)
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 140k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:55:52 Mar  9 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xa800, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xa400, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xa000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci-hcd 00:10.3: irq 9, pci mem f8863000
usb.c: new USB bus registered, assigned bus number 4
ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2002-Dec-20
hub.c: USB hub found
hub.c: 6 ports detected
usbdevfs: remount parameter error
Adding Swap: 522072k swap-space (priority -1)
hub.c: connect-debounce failed, port 1 disabled
hub.c: new USB device 00:10.1-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x471/0x307) is not claimed by any active driver.
hub.c: new USB device 00:10.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc506) is not claimed by any active driver.
Linux video capture interface: v1.00
pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.8 
loaded.
pwc Also supports the Askey VC010, Logitech Quickcam 3000 Pro, Samsung MPC-C10 and 
MPC-C30,
pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
pwc Default framerate set to 25.
pwc Default image size set to vga [640x480].
pwc Number of image buffers set to 3.
pwc Preferred compression set to 0.
usb.c: registered new driver Philips webcam
pwc Philips PCVC675K (Vesta) USB webcam detected.
pwc Registered as /dev/video0.
usb.c: registered new driver usb_mouse
spurious 8259A interrupt: IRQ7.
input0: Logitech USB Receiver on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: LITE-ON   Model: LTR-48125S        Rev: 1S01
  Type:   CD-ROM                             ANSI SCSI revision: 02
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
inserting floppy driver for 2.4.21-0.15mm-mdkcustom
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
ohci1394: $Rev: 693 $ Ben Collins <[EMAIL PROTECTED]>
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[dd800000-dd8007ff]  Max Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ieee1394: Host added: Node[00:1023]  GUID[00023c0091016b74]  [Linux OHCI-1394]
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xf8914000, 00:02:44:24:cb:4b, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'
Broadcom 4401 Ethernet Driver bcm4400 ver. 1.0.1 (08/26/02)
eth1: Broadcom BCM4401 100Base-T found at mem de000000, IRQ 9, node addr 00e018a1a164

ksymoops 2.4.8 on i686 2.4.21-0.15mm-mdkcustom.  Options used
     -V (specified)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.4.21-0.15mm-mdkcustom/ (default)
     -m /boot/System.map-2.4.21-0.15mm-mdkcustom (default)

f9C4SDtS@;P<fufC6fC44$u]u}ÉD$ 
D$D$D$D$F$ )D$u)D$v)D$
$)t&C6d$)[EMAIL 
PROTECTED])$)׍&$)_v'UW1V1S 
UEX9ƉEso
U1҉uuUUBx4U9U9srG9rY9sUW9r']9s
 F;ur [^_ÉT$t$D$`)ED$v)$1щD$t$D$)׋]D$t$
D$)D$v)$ō&'UWV1S}GE1M EEظu]4?E
Nt7U11 EEEU11 EпEEU]1u 
EEظu]1)9}|
9vu}EU[^_됐UWVSHEE}EfEfEwƋ`}>tËEȁ˸NLJD$ED$
ED$ED$E$1҅u
<4>Warning: null TTY for (%s) in %s
Pid: %d, comm: %20s
EIP: %04x:[<%08lx>] CPU: %d EFLAGS: %08lx    %s
 DS: %04x ES: %04x
Call Trace: [<%08lx>] %08lx 
Stack: Code: %02x  Bad EIP value.<bad filename>kernel BUG at %s:%d!
<6>testing NMI watchdog ... console shuts up ...
ESI: %08lx EDI: %08lx EBP: %08lxCR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx
WARNING: dead process %8s still has LDT? <%p>
EIP:    %04x:[<%08lx>]    %s
EFLAGS: %08lx
eax: %08lx   ebx: %08lx   ecx: %08lx   edx: %08lx
esi: %08lx   edi: %08lx   ebp: %08lx   esp: %08lx
ds: %04x   es: %04x   ss: %04x
Process %s (pid: %d, stackpage=%08lx)Uhhuh. NMI received. Dazed and confused, but 
trying to continue
NMI: IOCK error (debug interrupt?)
Uhhuh. NMI received for unknown reason %02x.
<6>AMD K6 stepping B detected - <6>K6 BUG %ld %d (Report these if test report is 
incorrect)
fdiv_bug        : %s
hlt_bug         : %s
f00f_bug        : %s
coma_bug        : %s
<6> *** Building an SMP kernel may evade the bug some of the time.
<6>%s machine detected. Mousepad Resume Bug workaround enabled.
<3>PCI: BIOS BUG #%x[%08x] found
<4>ACPI: NMI not connected to LINT 1!
<3>ACPI: Error parsing NMI SRC entry
<3>ACPI: Error parsing LAPIC NMI entry
<3>WARNING: bogus zero I/O APIC address found in MP table, skipping!
<3>WARNING: bogus zero IO-APIC address found in MPTABLE, disabling IO/APIC support!
CPU#%d: NMI appears to be stuck!
NMI Watchdog detected LOCKUP on CPU%d, eip %08lx, registers:
<7>0123456789abcdef0123456789abcdef
<2>Aieee!!!  Remote IRR still set after unlock!
<6>activating NMI Watchdog ...<4>IOAPIC[%d]: apic_id %d already used, trying %d
<6>...trying to set up timer (IRQ0) through the 8259A ... <6>...trying to set up timer 
as Virtual Wire IRQ...<6>...trying to set up timer as ExtINT IRQ...<4>timer doesn't 
work through the IO-APIC - disabling NMI Watchdog!
PAE BUG #01!
<1>*pde = %08lx
<1>Unable to handle kernel NULL pointer dereference<1>Unable to handle kernel paging 
requestremap_area_pte: page already exists
kernel BUG in header file at line %d
<3>inter_module_register: duplicate im_name '%s'<3>Aiee, inter_module_register: cannot 
kmalloc entry for '%s'
Aiee, killing interrupt handler!Attempted to kill the idle task!<6>note: %s[%d] exited 
with preempt_count %d
Swsusp beta 17:   debug parameter set : %x
%-13.13s  %08lX %5lu %5d %6d %7d %5d (L-TLB)
Using defaults from ksymoops -t elf32-i386 -a i386
 (NOTLB)
Warning (Oops_read): Code line not seen, dumping what data is available

Proc;  %-13.13s

>>EIP; 00000008 Before first symbol   <=====

Pid:    %d
<4>  Warning: Disk has a valid GPT signature but invalid PMBR.
<6>ACPI: LAPIC_NMI (acpi_id[0x%02x] polarity[0x%x] trigger[0x%x] lint[0x%x])
<4>Warning: dev (%s) tty->count(%d) != #fd's(%d) in %s
, UDMA(16), UDMA(25), UDMA(33), UDMA(44), UDMA(66), UDMA(100), UDMA(133), UDMA(mode 
7), (U)DMA, BUG DMA OFF, DMA, BUG__ide_dma_retune%s: DMA interrupt recovery
<3>Warning: ATI Radeon IGP Northbridge is not yet fully tested.
Warning: %s channel requires an 80-pin cable for operation.
mcast_solicitucast_solicitapp_solicitretrans_timebase_reachable_timedelay_first_probe_timegc_stale_timeunres_qlenproxy_qlenanycast_delayproxy_delaylocktimegc_intervalgc_thresh1gc_thresh2gc_thresh3neigh<3>OOM
 queueing packet %p
0123456789ABCDEF%u.%u.%u.%u00:00:00:00:00:00ipv4icmp.c<7>icmp v4 hw csum failure
<4>Warning: kfree_skb on hard IRQ %p
<4>Warning: kfree_skb passed an skb still on a list (from %p).
<2>Dead loop on virtual device %s, fix it urgently!
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets 
errs drop fifo colls carrier compressed
 face | tus | link level noise |  nwid  crypt   frag  retry   misc | beacon
<2>Bug in ip_route_input_slow(). Please, report

1 warning issued.  Results may not be reliable.

Attachment: lilo.conf
Description: Binary data

Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to