Sensational - I'm in. Thanks so much for your help - I'm in awe.
James Northrop
On Mon, May 4, 2009 at 10:40 PM, Alexander Hansen <
[email protected]> wrote:
> This is a bit mysterious to me, since all of these libraries belong to
> gnucash, and should therefore have been built at the same time.
>
> Perhaps try
>
> fink -l rebuild gnucash2 ; fink reinstall gnucash2
>
> from the terminal to see if that will sort things out. I don't think
> you can set the compatibility version after a library is already built,
> unfortunately.
>
> And if you still have a problem, using the -l option captures a log file
> to help in debugging what's going on.
>
> James Northrop wrote:
> > Thanks for looking at my problem and for the suggestions.
> >
> > I tried the second, cleaner approach, and ran for 14 times, but the
> > same result kept coming back. So then I tried the first, faster
> > suggestion, and got a version error, as shown in the Terminal extract
> > below.
> >
> > james-imac:gnucash Caroline$ sudo install_name_tool -change
> > libgncmod-register-gnome.0.dylib libgncmod-register-gnome.dylib
> > /sw/lib/libgnc-gnome.0.dylib
> > james-imac:gnucash Caroline$ /sw/bin/gnucash
> > dyld: Library not loaded:
> /sw/lib/gnucash/libgncmod-register-gnome.0.dylib
> > Referenced from: /sw/lib/libgnc-gnome.0.dylib
> > Reason: image not found
> > Trace/BPT trap
> > james-imac:gnucash Caroline$ sudo ln -s libgncmod-register-gnome.dylib
> > libgncmod-register-gnome.0.dylib
> > james-imac:gnucash Caroline$ /sw/bin/gnucash
> > dyld: Library not loaded:
> /sw/lib/gnucash/libgncmod-register-gnome.0.dylib
> > Referenced from: /sw/lib/libgnc-gnome.0.dylib
> > Reason: Incompatible library version: libgnc-gnome.0.dylib requires
> > version 1.0.0 or later, but libgncmod-register-gnome.dylib provides
> > version 0.0.0
> > Trace/BPT trap
> >
> > Could you please suggest how I can update the library version, if this
> > is what I need to do.
> >
> > Thanks,
> >
> > James Northrop
> >
> >
>
> > On Mon, May 4, 2009 at 5:38 AM, Alexander Hansen
> > <[email protected] <mailto:[email protected]>>
> wrote:
> >
> > James Northrop wrote:
> > > I'm attempting to install Gnucash 2.2.9 onto my Mac OS X 10.5.6,
> > > having downloaded XCode 3.1.2 and X11 Extension 0.99. If you
> cannot
> > > tell already, I'm very new to Macs, open source software and Fink,
> > > though my interest in open source software stems from a Systems
> > > Analyst Graduate Diploma taken a short 7 years ago. This may be
> > > heresy, but I consider myself competent in MS-DOS and VBA.
> > >
> > > I believe that I have loaded and compiled the software OK, but
> > when I
> > > launch Gnucash, I get the following response:
> > >
> > > dyld: Library not loaded:
> > /sw/lib/gnucash/libgncmod-register-gnome.0.dylib
> > > Referenced from: /sw/lib/libgnc-gnome.0.dylib
> > > Reason: image not found
> > > Trace/BPT trap
> > >
> > > I have trawled Google, but could not find any tips on how to
> > diagnose
> > > and resolve this message.
> > >
> > > I installed Gnucash 2.2 via the Terminal on Apr-25, and believed
> > that
> > > the install was successful as there were no obvious error messages.
> > > When the command prompt returned, I immediately typed gnucash to
> > test,
> > > but got the error message. Curiously, my keystrokes were not
> > > displayed at the Terminal prompt, though the error above was the
> > response.
> > I've had things like that happen on occasion: it's not relevant
> > to the
> > issue at hand.
> > >
> > > The last lines of install log are shown below.
> > >
> > > Scanning dists/stable/crypto/binary-darwin-i386
> > > New package:
> > >
> >
> dists/stable/crypto/binary-darwin-i386/aqbanking16-shlibs_2.3.3-1008_darwin-i386.deb
> > > New package:
> > >
> >
> dists/stable/crypto/binary-darwin-i386/aqbanking16_2.3.3-1008_darwin-i386.deb
> > > New package:
> > >
> >
> dists/stable/crypto/binary-darwin-i386/gnome-keyring-dev_2.20.3-2_darwin-i386.deb
> > > New package:
> > >
> >
> dists/stable/crypto/binary-darwin-i386/gnome-keyring-shlibs_2.20.3-2_darwin-i386.deb
> > > New package:
> > >
> >
> dists/stable/crypto/binary-darwin-i386/gnome-keyring_2.20.3-2_darwin-i386.deb
> > > New package:
> > >
> >
> dists/stable/crypto/binary-darwin-i386/gnucash2-shlibs_2.2.5-152_darwin-i386.deb
> > > New package:
> > >
> >
> dists/stable/crypto/binary-darwin-i386/gnucash2_2.2.5-152_darwin-i386.deb
> > The end messages above indicate that what was actually installed was
> > gnucash-2.2.5, not 2.2.9--that's also a side point.
> >
> > <snip>
> > >
> > > james-imac:~ Caroline$ dyld: Library not loaded:
> > > /sw/lib/gnucash/libgncmod-register-gnome.0.dylib
> > > Referenced from: /sw/lib/libgnc-gnome.0.dylib
> > > Reason: image not found
> > > Trace/BPT trap
> > >
> > > Any tips on how to progress will be very appreciated.
> > >
> > > Thanks,
> > >
> > > James Northrop
> > >
> >
> ------------------------------------------------------------------------
> > What's going on here is that /sw/lib/libgnc-gnome.0.dylib is set up
> to
> > link, for some reason, to a file that doesn't exist. I've cc'ed the
> > package maintainer.
> >
> > Run the following command from a terminal window:
> >
> > dpkg -L gnucash2-shlibs | grep register-gnome
> >
> > I suspect that you'll get back
> >
> > /sw/lib/gnucash/libgncmod-register-gnome.dylib
> > /sw/lib/gnucash/libgncmod-register-gnome.la
> > <http://libgncmod-register-gnome.la>
> >
> > If that is indeed the case, there are couple of different ways to
> > handle
> > the situation. Probably the easiest is to run, from the terminal
> > again:
> >
> > cd /sw/lib/gnucash
> > sudo ln -s libgncmod-register-gnome.dylib
> > libgncmod-register-gnome.0.dylib
> >
> > That will create the missing filename as a symbolic link to the real
> > file.
> >
> > Another method, which is a bit cleaner, is to use install_name_tool:
> >
> > sudo install_name_tool -change libgncmod-register-gnome.0.dylib
> > libgncmod-register-gnome.dylib /sw/lib/libgnc-gnome.0.dylib
> >
> > That will change the name that is being looked for in the library.
> > You
> > may need to use this a number of times, if you have multiple
> libraries
> > that are all looking for libgncmod-register-gnome.0.dylib -- the
> > symbolic link mentioned earlier works around the issue for multiple
> > libraries at once, but at the penalty of having a file around that
> > isn't
> > registered in Fink's internal database of installed files.
> >
> > --
> > Alexander Hansen
> > Fink User Liaison
> >
> >
>
>
------------------------------------------------------------------------------
Register Now & Save for Velocity, the Web Performance & Operations
Conference from O'Reilly Media. Velocity features a full day of
expert-led, hands-on workshops and two days of sessions from industry
leaders in dedicated Performance & Operations tracks. Use code vel09scf
and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf
_______________________________________________
Fink-beginners mailing list
[email protected]
http://news.gmane.org/gmane.os.apple.fink.beginners
