Richard et al. I am using my 1500 and PSDR on the 630m band and have experimented with 2200m too. There is mW level drive on the transverter port on both bands but no filtering. I have a 100W commercial HF amp that only needs 0dBm to put out 50W on 475kHz. So I had to make an RX filter, TX filter and transverter output filter. Only 6W on 2200m so far. 160m inverted L with variometer base loading for both bands. Mostly WSPR, Opera (VK5 to G land) and a little CW. Andrew
Sent from Mail for Windows 10 From: Richard Sent: Tuesday, 19 January 2016 1:00 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Low band I may have (probably) missed it but everything I've noticed for the most part is addressing 6,xxx series radios. Will power SDR address the new low band so that my 1500 and 3000 will work that band as well as just listening to LW ? I thought it was all done with 2.7.2 which I didn't think there would be any more updates. Or should I try 2.7.2 and see if it updates? Thanks I hope, Rich KC8HMJ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
