Hafedh: I recommend having your system upgraded to version 6.1.2 (release update). I have recently observed a similar issue at another site. Installing 6.1.2 fixed the problem at that site. After the upgrade verify that your CP40 style "A" processor is at EPROM ver. 1.20 (check in Sys Mgmt) and the software version (check in the SELECT page, station block) should be V2K_01. Keep in mind, the release update it self only takes about 10 minutes + a reboot of the AW, however the Compliance media CD, which must be installed prior to the release update takes about 1.5 hours on an AW51B box, and about 20 minutes max on an AW51E box. Also, all CP's will require a reboot. More information (release notes) may be found on the Foxboro CSC web. I recommend a review of the "Problems resolved in 6.1.2" section.
Regards Steven Houdek Foxboro Field Service Invensys email: [EMAIL PROTECTED] Personal broadband, subscribed to Cassandra as: [EMAIL PROTECTED] ----- Original Message ----- From: "Ghodhbani, Hafedh" <[EMAIL PROTECTED]> To: "'Foxboro DCS Mail List'" <[EMAIL PROTECTED]> Sent: Thursday, September 27, 2001 3:38 AM Subject: RE: CP40 malfunction > John, > Since 1999 we have version 6.1.1. > > Hafedh Ghodhbani > Control and Instrument Engineer > British Gas Group > Hannibal Gas Plant Tunisia > ph 00 216 4 259 250 > Fax 00 216 4 259 449 > > -----Original Message----- > From: John Miller [mailto:[EMAIL PROTECTED]] > Sent: 26 September 2001 12:22 > To: 'Foxboro DCS Mail List' > Subject: RE: CP40 malfunction > > > Hafedh, > What version of I/A are you running? > John Miller > Hunt Refining Company > 1855 Fairlawn Road > Tuscaloosa, AL 35401 > voice: 205.391.3345 > fax: 205.345.8769 > [EMAIL PROTECTED] > > -----Original Message----- > From: Ghodhbani, Hafedh [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 26, 2001 5:39 AM > To: Foxboro DCS Mail List > Subject: CP40 malfunction > > > Gents, > I notice a strange malfunction that concerns some of my CP40FT type A > modules. It consists in the following: > > * frequently some single CP modules are auto-rebooted. > *sometimes some single CP modules are stopped. I reboot them manually. > *It happened one time that a CP40FT both modules stopped and a total plant > Shutdown occured > > It was reported to Foxboro, But they always asked to change the CP module! > Recently CAR2000274 was defined. However no feedback yet. > The type of system alarm messages I received last 4 months are the > following: > > EHSS 000141 Memory Parity Error - NMI Exception 00006C024868 > EHSS 000141 Memory Parity Error - NMI Exception 00006C078425 > RAMDSS 000003 COOP IOBUS Fail FBM I/O FAILURE. 00006C073595 > FTXSS 000090 Modules failed to sync up prior to mem to mem > 00006C079819 > EHSS 000141 Memory Parity Error - NMI Exception 00006C024868 > FTXSS 000080 Memory violation occured 00006C073595 > FTXSS 000080 Memory violation occured 00006C078463 > > Have someone experienced or resolved a similar malfunction? > What is the root-cause of this? > How can it be resolved? > Is there a chance that another plant shutdown take place due to CP40FT > Shutdown of both modules? > > Thanks > > Hafedh Ghodhbani > Control and Instrument Engineer > British Gas Group > Hannibal Gas Plant Tunisia > ph 00 216 4 259 250 > Fax 00 216 4 259 449 > > --------------------------------------------------------------------- > BG Energy Holdings Limited (a member of BG Group) > Registered in England No: 3763515 > Registered Address: > 100 Thames Valley Park Drive > Reading > Berkshire RG6 1PT UK > Telephone: +44 (0) 118 935 3222 > Website: http://www.BG-Group.com > > This e-mail is intended only for the addressee named above. As this > e-mail may contain confidential or privileged information, please > advise us immediately if you are not the named addressee or the person > responsible for delivering the message to the named addressee. The > contents should not be disclosed to any other person nor copies taken. > --------------------------------------------------------------------- > > ----------------------------------------------------------------------- > This list is neither sponsored nor endorsed by the Foxboro Company. All > postings from this list are the work of list subscribers and no warranty > is made or implied as to the accuracy of any information disseminated > through this medium. By subscribing to this list you agree to hold the > list sponsor(s) blameless for any and all mishaps which might occur due to > your application of information received from this mailing list. > > To be removed from this list, send mail to > [EMAIL PROTECTED] > with "unsubscribe foxboro" in the Subject. Or, send any mail to > [EMAIL PROTECTED] > > ----------------------------------------------------------------------- > This list is neither sponsored nor endorsed by the Foxboro Company. All > postings from this list are the work of list subscribers and no warranty > is made or implied as to the accuracy of any information disseminated > through this medium. By subscribing to this list you agree to hold the > list sponsor(s) blameless for any and all mishaps which might occur due to > your application of information received from this mailing list. > > To be removed from this list, send mail to > [EMAIL PROTECTED] > with "unsubscribe foxboro" in the Subject. Or, send any mail to > [EMAIL PROTECTED] > > > _____________________________________________________________________ > This message has been checked for all known viruses by the > Message Labs Virus Control Centre. > > --------------------------------------------------------------------- > BG Energy Holdings Limited (a member of BG Group) > Registered in England No: 3763515 > Registered Address: > 100 Thames Valley Park Drive > Reading > Berkshire RG6 1PT UK > Telephone: +44 (0) 118 935 3222 > Website: http://www.BG-Group.com > > This e-mail is intended only for the addressee named above. As this > e-mail may contain confidential or privileged information, please > advise us immediately if you are not the named addressee or the person > responsible for delivering the message to the named addressee. The > contents should not be disclosed to any other person nor copies taken. > --------------------------------------------------------------------- > > ----------------------------------------------------------------------- > This list is neither sponsored nor endorsed by the Foxboro Company. All > postings from this list are the work of list subscribers and no warranty > is made or implied as to the accuracy of any information disseminated > through this medium. By subscribing to this list you agree to hold the > list sponsor(s) blameless for any and all mishaps which might occur due to > your application of information received from this mailing list. > > To be removed from this list, send mail to > [EMAIL PROTECTED] > with "unsubscribe foxboro" in the Subject. Or, send any mail to > [EMAIL PROTECTED] > ----------------------------------------------------------------------- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with "unsubscribe foxboro" in the Subject. Or, send any mail to [EMAIL PROTECTED]
