The 'ENC IRQ OVERFLOW' was not initiated before after I started "watch tv" from mythtv.
The video from 'dd if=/dev/videoX of=test.mpg' is fine - no sound for 500mce.
/dev/video0 : pvr350: video is fine , sound is fine
/dev/video1 : pvr500: tuner 1: video is fine - no sound
/dev/video2 : pvr500: tuner 2: video is fine - no sound
Sigurd
my settings: /sbin/modprobe i2c-core /sbin/modprobe i2c-algo-bit /sbin/modprobe videodev /sbin/modprobe msp3400 simple=1 /sbin/modprobe saa7115 /sbin/modprobe saa7127 i2c_enable=1,-1,-1 /sbin/modprobe tda9887 /sbin/modprobe tveeprom /sbin/modprobe ivtv ivtv_std=2 tda9887=0 ivtv_debug=1 tuner=38,56,56 /sbin/modprobe tuner debug=1 /sbin/modprobe cx25840 i2c_enable=-1,1,1 /sbin/modprobe wm8775 mixer=2 /sbin/modprobe lirc_i2c /usr/local/sbin/lircd -d /dev/lirc0 --permission=666 ln -s /dev/lirc0 /dev/lirc /usr/local/bin/ivtvctl -d /dev/video1 -u 1 -f width=720,height=576 -p 7 /usr/local/bin/ivtvctl -d /dev/video2 -u 1 -f width=720,height=576 -p 7 /usr/local/bin/ivtvctl -d /dev/video0 -u 0xff /usr/local/bin/ivtvctl -d /dev/video0 -p 4 /usr/local/bin/ivtvctl -d /dev/video0 -f width=720,height=576 /usr/local/bin/ivtvctl -d /dev/video0 -c dnr_mode=0 /usr/local/bin/ivtvctl -d /dev/video0 -c dnr_temporal=0 /usr/local/bin/ivtvctl -d /dev/video0 -c dnr_spatial=0 /usr/local/bin/ivtvctl -j reg=0x6c,val=0xfe -d /dev/video0 /usr/local/bin/ivtvctl -j reg=0x2d,val=0x38 -d /dev/video0 /usr/local/bin/ivtvctl -j reg=0x61,val=0xb1 -d /dev/video0
Apr 19 22:27:56 localhost kernel: ivtv: ==================== START INIT IVTV ====================
Apr 19 22:27:56 localhost kernel: ivtv: version 0.3.3 (e) loading
Apr 19 22:27:56 localhost kernel: ivtv: Linux version: 2.6.11.7 K7 gcc-3.4
Apr 19 22:27:56 localhost kernel: ivtv: In case of problems please include the debug info
Apr 19 22:27:56 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
Apr 19 22:27:56 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
Apr 19 22:27:56 localhost kernel: ivtv: Autodetected WinTV PVR 350 card
Apr 19 22:27:56 localhost kernel: ivtv: Found an iTVC15 based chip
Apr 19 22:27:56 localhost kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32)
Apr 19 22:27:56 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor: 0x1106
Apr 19 22:27:56 localhost kernel: msp34xx: ivtv version
Apr 19 22:27:56 localhost kernel: msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode
Apr 19 22:27:56 localhost kernel: msp34xx: $Id$ compiled on: Apr 19 2005 21:20:36
Apr 19 22:27:56 localhost kernel: ivtv: i2c attach [client=MSP3418W-B3,ok]
Apr 19 22:27:57 localhost kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
Apr 19 22:27:57 localhost kernel: saa7115: detecting saa7115 client on address 0x42
Apr 19 22:27:57 localhost kernel: saa7115: writing init values
Apr 19 22:27:57 localhost kernel: ivtv: i2c attach [client=saa7115[50],ok]
Apr 19 22:27:57 localhost kernel: saa7115: status: (1E) 0x40, (1F) 0xc0
Apr 19 22:27:57 localhost kernel: saa7127: detecting saa7127 client on address 0x88
Apr 19 22:27:57 localhost kernel: saa7127: Selecting NTSC video Standard
Apr 19 22:27:57 localhost kernel: saa7127: Selecting S-Video+Composite
Apr 19 22:27:57 localhost kernel: saa7127: Turn WSS off
Apr 19 22:27:57 localhost kernel: saa7127: Widescreen Mode 4:3 Full Format
Apr 19 22:27:57 localhost kernel: saa7127: Selecting Normal Encoder Input
Apr 19 22:27:57 localhost kernel: saa7127: Enable Video Output
Apr 19 22:27:57 localhost kernel: ivtv: i2c attach [client=saa7127[0],ok]
Apr 19 22:27:57 localhost kernel: tda9885/6/7: chip found @ 0x86
Apr 19 22:27:57 localhost kernel: ivtv: i2c attach [client=tda9887,ok]
Apr 19 22:27:57 localhost kernel: tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7596580
Apr 19 22:27:57 localhost kernel: tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
Apr 19 22:27:57 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Apr 19 22:27:57 localhost kernel: tveeprom: audio_processor = CS5331 (type = 9)
Apr 19 22:27:57 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok]
Apr 19 22:27:57 localhost kernel: ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001
Apr 19 22:27:57 localhost kernel: ivtv: Radio detected
Apr 19 22:27:57 localhost kernel: tuner: Ignoring new-style parameters in presence of obsolete ones
Apr 19 22:27:57 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Apr 19 22:27:57 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Apr 19 22:27:58 localhost kernel: ivtv: Encoder revision: 0x02040011
Apr 19 22:27:58 localhost kernel: ivtv: Decoder revision: 0x02020023
Apr 19 22:27:58 localhost kernel: ivtv: Configuring WinTV PVR 350 card with 10 streams
Apr 19 22:27:58 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 minor 0
Apr 19 22:27:58 localhost kernel: ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 minor 32
Apr 19 22:27:58 localhost kernel: ivtv: Create DMA stream 1
Apr 19 22:27:58 localhost kernel: ivtv: Allocate DMA stream 1
Apr 19 22:27:58 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 minor 224
Apr 19 22:27:58 localhost kernel: ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Allocate DMA stream 2 using 40 52224 byte buffers 2097152 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 minor 24
Apr 19 22:27:58 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64
Apr 19 22:27:58 localhost kernel: ivtv: Create stream 4
Apr 19 22:27:58 localhost kernel: ivtv: Allocate stream 4
Apr 19 22:27:58 localhost kernel: ivtv: Registered v4l2 device, streamtype 5 minor 16
Apr 19 22:27:58 localhost kernel: ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Registered v4l2 device, streamtype 6 minor 228
Apr 19 22:27:58 localhost kernel: ivtv: Create DMA stream 6 using 1024 2048 byte buffers 0 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Allocate DMA stream 6 using 1024 2048 byte buffers 262144 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Registered v4l2 device, streamtype 7 minor 232
Apr 19 22:27:58 localhost kernel: ivtv: Create stream 7
Apr 19 22:27:58 localhost kernel: ivtv: Allocate stream 7
Apr 19 22:27:58 localhost kernel: ivtv: Registered v4l2 device, streamtype 8 minor 48
Apr 19 22:27:58 localhost kernel: ivtv: Create DMA stream 8 using 24 86400 byte buffers 0 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Allocate DMA stream 8 using 24 86400 byte buffers 2097152 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total
Apr 19 22:27:58 localhost kernel: ivtv: Setting Tuner 38
Apr 19 22:27:58 localhost kernel: tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0
Apr 19 22:27:58 localhost kernel: saa7115: decoder set input (4)
Apr 19 22:27:58 localhost kernel: saa7115: now setting Composite input
Apr 19 22:27:58 localhost kernel: ivtv: Setting audio matrix to input 3, output 1
Apr 19 22:27:58 localhost kernel: ivtv: Switching standard to PAL.
Apr 19 22:27:58 localhost kernel: ivtv: ivtv_enc_thread: pid = 6358, itv = 0xe0f33860
Apr 19 22:27:58 localhost kernel: ivtv: ivtv_dec_thread: pid = 6359, itv = 0xe0f33860
Apr 19 22:27:58 localhost kernel: saa7115: decoder set norm PAL
Apr 19 22:27:58 localhost kernel: saa7115: set audio: 0x01
Apr 19 22:27:58 localhost kernel: saa7127: Setting Encoder Video Standard
Apr 19 22:27:58 localhost kernel: saa7127: Set PAL Video Mode
Apr 19 22:27:58 localhost kernel: saa7127: Selecting PAL video Standard
Apr 19 22:27:59 localhost kernel: ivtv: Initialized WinTV PVR 350, card #0
Apr 19 22:27:59 localhost kernel: ivtv: Autodetected WinTV PVR 150 card
Apr 19 22:27:59 localhost kernel: ivtv: Found an iTVC16 based chip
Apr 19 22:27:59 localhost kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32)
Apr 19 22:27:59 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor: 0x1106
Apr 19 22:27:59 localhost kernel: saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
Apr 19 22:27:59 localhost kernel: saa7127: detecting saa7127 client on address 0x88
Apr 19 22:27:59 localhost kernel: saa7127: saa7127 client id: saa7127_i2c_id 1, skipped
Apr 19 22:27:59 localhost kernel: tda9885/6/7: chip found @ 0x86
Apr 19 22:27:59 localhost kernel: ivtv: i2c attach [client=tda9887,ok]
Apr 19 22:27:59 localhost kernel: tveeprom: Hauppauge: model = 23559, rev = D391, serial# = 7743994
Apr 19 22:27:59 localhost kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
Apr 19 22:27:59 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Apr 19 22:27:59 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 5)
Apr 19 22:27:59 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok]
Apr 19 22:27:59 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
Apr 19 22:27:59 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Apr 19 22:27:59 localhost kernel: ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00913651, Revision 0x00000000
Apr 19 22:27:59 localhost kernel: ivtv: Radio detected
Apr 19 22:28:03 localhost kernel: cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded.
Apr 19 22:28:03 localhost kernel: cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa
Apr 19 22:28:03 localhost kernel: cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6
Apr 19 22:28:03 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok]
Apr 19 22:28:03 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok]
Apr 19 22:28:04 localhost kernel: ivtv: Encoder revision: 0x02040011
Apr 19 22:28:04 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams
Apr 19 22:28:04 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 minor 1
Apr 19 22:28:04 localhost kernel: ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total
Apr 19 22:28:04 localhost kernel: ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total
Apr 19 22:28:04 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 minor 33
Apr 19 22:28:04 localhost kernel: ivtv: Create DMA stream 1
Apr 19 22:28:04 localhost kernel: ivtv: Allocate DMA stream 1
Apr 19 22:28:04 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 minor 225
Apr 19 22:28:04 localhost kernel: ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total
Apr 19 22:28:04 localhost kernel: ivtv: Allocate DMA stream 2 using 40 52224 byte buffers 2097152 kbytes total
Apr 19 22:28:04 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 minor 25
Apr 19 22:28:04 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
Apr 19 22:28:04 localhost kernel: ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
Apr 19 22:28:04 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 minor 65
Apr 19 22:28:04 localhost kernel: ivtv: Create stream 4
Apr 19 22:28:04 localhost kernel: ivtv: Allocate stream 4
Apr 19 22:28:04 localhost kernel: ivtv: Setting Tuner 56
Apr 19 22:28:04 localhost kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1
Apr 19 22:28:04 localhost kernel: ivtv: Switching standard to PAL.
Apr 19 22:28:04 localhost kernel: ivtv: Initialized WinTV PVR 150, card #1
Apr 19 22:28:04 localhost kernel: ivtv: Autodetected WinTV PVR 150 card
Apr 19 22:28:04 localhost kernel: ivtv: Found an iTVC16 based chip
Apr 19 22:28:04 localhost kernel: ivtv: ivtv_enc_thread: pid = 6638, itv = 0xe0f4774c
Apr 19 22:28:04 localhost kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32)
Apr 19 22:28:04 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor: 0x1106
Apr 19 22:28:04 localhost kernel: saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005)
Apr 19 22:28:04 localhost kernel: saa7127: detecting saa7127 client on address 0x88
Apr 19 22:28:04 localhost kernel: saa7127: saa7127 client id: saa7127_i2c_id 2, skipped
Apr 19 22:28:04 localhost kernel: tda9885/6/7: chip found @ 0x86
Apr 19 22:28:04 localhost kernel: ivtv: i2c attach [client=tda9887,ok]
Apr 19 22:28:04 localhost kernel: tveeprom: Hauppauge: model = 23559, rev = D391, serial# = 7743994
Apr 19 22:28:04 localhost kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
Apr 19 22:28:04 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Apr 19 22:28:04 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 5)
Apr 19 22:28:04 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok]
Apr 19 22:28:04 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2
Apr 19 22:28:04 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Apr 19 22:28:09 localhost kernel: cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded.
Apr 19 22:28:09 localhost kernel: cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa
Apr 19 22:28:09 localhost kernel: cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6
Apr 19 22:28:09 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok]
Apr 19 22:28:09 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok]
Apr 19 22:28:09 localhost kernel: ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00913651, Revision 0x00000000
Apr 19 22:28:09 localhost kernel: ivtv: Radio detected
Apr 19 22:28:10 localhost kernel: ivtv: Encoder revision: 0x02040011
Apr 19 22:28:10 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams
Apr 19 22:28:10 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 minor 2
Apr 19 22:28:10 localhost kernel: ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total
Apr 19 22:28:10 localhost kernel: ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total
Apr 19 22:28:10 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 minor 34
Apr 19 22:28:10 localhost kernel: ivtv: Create DMA stream 1
Apr 19 22:28:10 localhost kernel: ivtv: Allocate DMA stream 1
Apr 19 22:28:10 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 minor 226
Apr 19 22:28:10 localhost kernel: ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total
Apr 19 22:28:10 localhost kernel: ivtv: Allocate DMA stream 2 using 40 52224 byte buffers 2097152 kbytes total
Apr 19 22:28:10 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 minor 26
Apr 19 22:28:10 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
Apr 19 22:28:10 localhost kernel: ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
Apr 19 22:28:10 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 minor 66
Apr 19 22:28:10 localhost kernel: ivtv: Create stream 4
Apr 19 22:28:10 localhost kernel: ivtv: Allocate stream 4
Apr 19 22:28:10 localhost kernel: ivtv: Setting Tuner 56
Apr 19 22:28:10 localhost kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #2
Apr 19 22:28:10 localhost kernel: ivtv: Switching standard to PAL.
Apr 19 22:28:10 localhost kernel: ivtv: Initialized WinTV PVR 150, card #2
Apr 19 22:28:10 localhost kernel: ivtv: ==================== END INIT IVTV ====================
Chris Kennedy wrote:
Have you done a full cold reboot?, shouldn't have caused that, seems odd to cause that.
Thanks, Chris On Tue, Apr 19, 2005 at 09:48:12PM +0200, Sigurd Nes wrote:
Chris Kennedy wrote:
I became aware of a problem in the cx25840 digitizer which we had
hit since changing the code from Ulfs original setup, where we would
reset the registers upon starting a capture. It seems if we don't
do this just right, then the chip doesn't setup itself to a good state for things like the proc-amp and possibly other settings. I had
to figure out the best way to keep from losing other settings we manually
set but still give it this reset. So this attempts that, seems like it
should work, please test this if you've had problems with pvr150/500 cards
since the version 0.3.2u or so, and also if you are currently doing fine
with these cards, so we can make sure this is a good overall global solution
for everyone (and really the right thing to do). Video proc-amp settings
would be dark and red without these changes, and this could also be why
some don't have sound anymore and various other things (like no capture).
#0.3.3e: http://www.ivtv.tv/releases/ivtv-0.3/
Thanks, Chris
Got a lot of "ENC IRQ OVERFLOW"
Sigurd
-------------------------------------------------------
------------------------------------------------------- This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime info, new features, or free trial, at: http://www.businessobjects.com/devxi/728 _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
