Chris,

I'm also getting a lot of ENC IRQ OVERFLOW errors on a 150MCE NTSC,
here is the last one:

ivtv: ENC IRQ OVERFLOW: #9057 Stealing a Buffer, 2 currently allocated

this is accompanied by occasional corruption and pixelation in the
video stream. I did a cold reboot before testing. On an unrelated
note, I've been getting mono audio from the driver since the earliest
versions.  The CX25840_SET_PREF_MODE(0x0004) should do it, but I can't
seem to get stereo from the card unless running under windows.


On 4/19/05, Chris Kennedy <[EMAIL PROTECTED]> wrote:
> Have you done a full cold reboot?, shouldn't have caused that, seems odd
> to cause that.
> 
> Thanks,
> Chris
> On Tue, Apr 19, 2005 at 09:48:12PM +0200, Sigurd Nes wrote:
> > Chris Kennedy wrote:
> > >I became aware of a problem in the cx25840 digitizer which we had
> > >hit since changing the code from Ulfs original setup, where we would
> > >reset the registers upon starting a capture.  It seems if we don't
> > >do this just right, then the chip doesn't setup itself to a good
> > >state for things like the proc-amp and possibly other settings.  I had
> > >to figure out the best way to keep from losing other settings we manually
> > >set but still give it this reset.  So this attempts that, seems like it
> > >should work, please test this if you've had problems with pvr150/500 cards
> > >since the version 0.3.2u or so, and also if you are currently doing fine
> > >with these cards, so we can make sure this is a good overall global
> > >solution
> > >for everyone (and really the right thing to do).  Video proc-amp settings
> > >would be dark and red without these changes, and this could also be why
> > >some don't have sound anymore and various other things (like no capture).
> > >
> > >#0.3.3e: http://www.ivtv.tv/releases/ivtv-0.3/
> > >
> > >
> > >Thanks,
> > >Chris
> >
> > Got a lot of "ENC IRQ OVERFLOW"
> >
> > Sigurd
> >
> >
> > -------------------------------------------------------
> > This SF.Net email is sponsored by: New Crystal Reports XI.
> > Version 11 adds new functionality designed to reduce time involved in
> > creating, integrating, and deploying reporting solutions. Free runtime
> > info,
> > new features, or free trial, at: http://www.businessobjects.com/devxi/728
> > _______________________________________________
> > ivtv-devel mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/ivtv-devel
> 
> --
> ---
>  Chris Kennedy / [EMAIL PROTECTED]
>   Engineer KMOS-TV/KTBG-FM
>   Broadcasting Services Department
>   Central Missouri State University
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: New Crystal Reports XI.
> Version 11 adds new functionality designed to reduce time involved in
> creating, integrating, and deploying reporting solutions. Free runtime info,
> new features, or free trial, at: http://www.businessobjects.com/devxi/728
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>


-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI.
Version 11 adds new functionality designed to reduce time involved in
creating, integrating, and deploying reporting solutions. Free runtime info,
new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to