Hi @ ivtv-devel,
I had mythtv and ivtv working for quite some time on my PVR 250, 2.6.8
kernel and 0.2.0 (rc3i) on Fedora Core 2. No complaints. I installed a
tuner type 38 PVR 350 recently and have been trying to get them both
running in the same machine. I have no Problems watching TV and changing
channels on the PVR 250, but the PVR 350 won't work with the tuner, the
Composite Input seems to work (the Picture gets black when i change the
input with ptune-ui)
I also tried to move the cards through various PCI slots, tried to set
tuner direct via options in modprobe.conf, no change.
Have i missed something?
Regards
Andreas
Here's /etc/modprobe.conf:
alias char-major-61 lirc_i2c
alias eth0 sis900
alias usb-controller ehci-hcd
alias usb-controller1 ohci-hcd
install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 &&
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-intel8x0
alias snd-card-0 snd-intel8x0
# ivtv kernel modules
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias msp3400 msp3400-ivtv
install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install
lirc_i2c
# nvidia kernel module
alias char-major-195 nvidia-1_0-7174
alias nvidia nvidia-1_0-7174
IVTV Output:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3i) loading
ivtv: Linux version: 2.6.10-1.771_FC2 686 REGPARM 4KSTACKS gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: XXX PCI device: 0x0661 vendor: 0x1039
ivtv: i2c attach [client=tveeprom,ok]
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7671464
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model
0x00ad2557, Revision 0xe0a85304
ivtv: Radio detected
ivtv: i2c attach [client=(tuner unset),ok]
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x40, (1F) 0xc0
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Apr 3 2005 19:27:44
ivtv: i2c attach [client=MSP3418W-B3,ok]
bttv: driver version 0.9.15 loaded
bttv: snapshot date 2005-03-10
bttv: using 8 buffers with 2080k (520 pages) each for capture
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes
total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Setting Tuner 38
tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 2709, itv = 0xe0a7a120
ivtv: ivtv_dec_thread: pid = 2710, itv = 0xe0a7a120
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: XXX PCI device: 0x0661 vendor: 0x1039
ivtv: i2c attach [client=tveeprom,ok]
ivtv: i2c attach [client=(tuner unset),ok]
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[1],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Apr 3 2005 19:27:44
ivtv: i2c attach [client=MSP3418W-A2,ok]
tveeprom: Hauppauge: model = 32054, rev = B148, serial# = 2766638
tveeprom: tuner = LG TP18PSB11D (idx = 48, type = 29)
tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: Tuner Type 29, Tuner formats 0x00000007, Radio: yes, Model
0x00891518, Revision 0xe0a997a4
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes
total
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Setting Tuner 29
tuner 1-0061: type set to 29 (LG PAL_BG (TPI8PSB11D))
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 2761, itv = 0xe0a8e5c0
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #1
ivtv: ==================== END INIT IVTV ====================
-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI.
Version 11 adds new functionality designed to reduce time involved in
creating, integrating, and deploying reporting solutions. Free runtime info,
new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
