Hello, I try to configure the last release for the ivtv driver:ivtv: version 0.3.6 (z)
Video capture output produce a good quality, but no sound ... I'm running Debian Sarge with: 1 GB RAM Athlon 2800 This is my first ivtv installation. Then, I followed the instructions on http://ivtv.writeme.ch Driver was compiled without problems. I live in a PAL country (in Switzerland) After several days spend to read forums and documentations, unfortunately, I cannot find what is wrong. Could you please check if my configuration is ok ? Question: --------- I think I don't need to connect my sound card to my PVR-500 to have sound, correct ? Thanks for your help and have a nice day Jean My modules settings: -------------------- teloche:/etc/modutils# pwd /etc/modutils teloche:/etc/modutils# cat ivtv # ivtv settings alias char-major-61 lirc_i2c alias char-major-81 videodev alias char-major-81-0 ivtv alias char-major-81-1 ivtv alias /dev/v4l ivtv options cx25840 no_black_magic=1 options cx25840 i2c_enable=1 options ivtv ivtv_debug=2 ivtv_pal=1 ivtv_std=1 # cardtype=6 options tuner pal=1 options saa7127 enable_output=1 output_select=0 pal=1 options msp3400 once=1 simple=1 add below ivtv msp3400 saa7115 saa7127 tuner add above ivtv lirc_dev lirc_i2c # ivtv-fb post-install ivtv /usr/local/bin/ivtvctl -d /dev/video0 -u 0xff #post-install ivtv /usr/local/bin/ivtvctl -d /dev/video1 -u 0xff teloche:/etc/modutils# Loading modules: ---------------- modprobe ivtv teloche:/etc/modutils# lsmod Module Size Used by tda9887 14360 0 wm8775 10392 0 cx25840 43304 0 firmware_class 10624 1 cx25840 tuner 21540 0 tveeprom 14260 0 ivtv 1349380 1 i2c_algo_bit 9992 1 ivtv videodev 10368 2 ivtv snd_intel8x0 32704 1 snd_ac97_codec 75648 1 snd_intel8x0 snd_pcm_oss 53664 0 snd_mixer_oss 20480 2 snd_pcm_oss snd_pcm 93320 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 26628 1 snd_pcm snd 55140 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 10720 2 snd snd_page_alloc 10116 2 snd_intel8x0,snd_pcm i2c_nforce2 6784 0 i2c_core 23312 7 tda9887,wm8775,cx25840,tuner,tveeprom,i2c_algo_bit,i2c_nforce2 ext3 136072 4 jbd 63256 1 ext3 analog 12192 0 gameport 4992 1 analog floppy 60496 0 pcspkr 3940 0 rtc 13496 0 amd74xx 13980 0 [permanent] ehci_hcd 47112 0 ohci_hcd 32008 0 usbcore 131704 3 ehci_hcd,ohci_hcd amd64_agp 12744 1 agpgart 35240 1 amd64_agp e100 36224 0 mii 5248 1 e100 evdev 9728 0 psmouse 29832 0 ide_generic 1408 0 [permanent] ide_disk 18176 0 ide_cd 42244 0 cdrom 41248 1 ide_cd ide_scsi 16644 0 ide_core 133416 5 amd74xx,ide_generic,ide_disk,ide_cd,ide_scsi sd_mod 19472 7 sata_sil 8836 0 sata_nv 9476 5 libata 48516 2 sata_sil,sata_nv scsi_mod 139080 3 ide_scsi,sd_mod,libata unix 29620 492 teloche:/etc/modutils# Output from /var/log/messages: ----------------------------- Jul 19 23:15:34 teloche kernel: Linux video capture interface: v1.00 Jul 19 23:15:34 teloche kernel: ivtv: ==================== START INIT IVTV ==================== Jul 19 23:15:34 teloche kernel: ivtv: version 0.3.6 (z) loading Jul 19 23:15:34 teloche kernel: ivtv: Linux version: 2.6.11.12juillet preempt K8 gcc-3.3 Jul 19 23:15:34 teloche kernel: ivtv: In case of problems please include the debug info Jul 19 23:15:34 teloche kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Jul 19 23:15:34 teloche kernel: ivtv: mailing the ivtv-devel mailinglist. Jul 19 23:15:34 teloche kernel: ivtv: Autodetected WinTV PVR 150 card Jul 19 23:15:34 teloche kernel: ivtv: Found an iTVC16 based chip Jul 19 23:15:34 teloche kernel: ivtv: XXX PCI device: 0x00e1 vendor: 0x10de Jul 19 23:15:34 teloche kernel: tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8201302 Jul 19 23:15:34 teloche kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) Jul 19 23:15:34 teloche kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Jul 19 23:15:34 teloche kernel: tveeprom: audio_processor = MSP3410D (type = 5) Jul 19 23:15:34 teloche kernel: ivtv: i2c attach [client=tveeprom[50],ok] Jul 19 23:15:34 teloche kernel: ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00915651, Revision 0x00000000 Jul 19 23:15:34 teloche kernel: ivtv: PAL tuner detected Jul 19 23:15:34 teloche kernel: ivtv: Radio detected Jul 19 23:15:34 teloche kernel: tuner: Ignoring new-style parameters in presence of obsolete ones Jul 19 23:15:34 teloche kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Jul 19 23:15:34 teloche kernel: ivtv: i2c attach [client=(tuner unset),ok] Jul 19 23:15:34 teloche kernel: cx25840: requesting /lib/modules/HcwMakoA.ROM Jul 19 23:15:35 teloche kernel: cx25840: firmware loaded Jul 19 23:15:35 teloche kernel: ivtv: i2c attach [client=cx25840[50],ok] Jul 19 23:15:35 teloche kernel: ivtv: i2c attach [client=wm8775[50],ok] Jul 19 23:15:35 teloche kernel: tda9885/6/7: chip found @ 0x86 Jul 19 23:15:35 teloche kernel: ivtv: i2c attach [client=tda9887,ok] Jul 19 23:15:36 teloche kernel: ivtv: Encoder revision: 0x02050032 Jul 19 23:15:36 teloche kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Jul 19 23:15:36 teloche kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder MPEG minor 0 Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder YUV minor 32 Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder VBI minor 224 Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder PCM audio minor 24 Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder radio minor 64 Jul 19 23:15:36 teloche kernel: ivtv: Create encoder radio stream Jul 19 23:15:36 teloche kernel: ivtv: Setting Tuner 56 Jul 19 23:15:36 teloche kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0 Jul 19 23:15:36 teloche kernel: ivtv: ivtv_enc_thread: pid = 4982, itv = 0xf8ad6ea0 Jul 19 23:15:36 teloche kernel: ivtv: ivtv_enc_vbi_thread: pid = 4983, itv = 0xf8ad6ea0 Jul 19 23:15:36 teloche kernel: ivtv: Switching standard to PAL. Jul 19 23:15:36 teloche kernel: ivtv: Initialized WinTV PVR 150, card #0 Jul 19 23:15:36 teloche kernel: ivtv: Autodetected WinTV PVR 150 card Jul 19 23:15:36 teloche kernel: ivtv: Found an iTVC16 based chip Jul 19 23:15:36 teloche kernel: ivtv: XXX PCI device: 0x00e1 vendor: 0x10de Jul 19 23:15:36 teloche kernel: tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8201302 Jul 19 23:15:36 teloche kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) Jul 19 23:15:36 teloche kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Jul 19 23:15:36 teloche kernel: tveeprom: audio_processor = MSP3410D (type = 5) Jul 19 23:15:36 teloche kernel: ivtv: i2c attach [client=tveeprom[50],ok] Jul 19 23:15:36 teloche kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 Jul 19 23:15:36 teloche kernel: ivtv: i2c attach [client=(tuner unset),ok] Jul 19 23:15:36 teloche kernel: cx25840: requesting /lib/modules/HcwMakoA.ROM Jul 19 23:15:38 teloche kernel: cx25840: firmware loaded Jul 19 23:15:38 teloche kernel: ivtv: i2c attach [client=cx25840[50],ok] Jul 19 23:15:38 teloche kernel: ivtv: i2c attach [client=wm8775[50],ok] Jul 19 23:15:38 teloche kernel: tda9885/6/7: chip found @ 0x86 Jul 19 23:15:38 teloche kernel: ivtv: i2c attach [client=tda9887,ok] Jul 19 23:15:38 teloche kernel: ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00915651, Revision 0x00000000 Jul 19 23:15:38 teloche kernel: ivtv: Radio detected Jul 19 23:15:39 teloche kernel: ivtv: Encoder revision: 0x02050032 Jul 19 23:15:39 teloche kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Jul 19 23:15:39 teloche kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder MPEG minor 1 Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder YUV minor 33 Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder VBI minor 225 Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder PCM audio minor 25 Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder radio minor 65 Jul 19 23:15:39 teloche kernel: ivtv: Create encoder radio stream Jul 19 23:15:39 teloche kernel: ivtv: Setting Tuner 56 Jul 19 23:15:39 teloche kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 Jul 19 23:15:39 teloche kernel: ivtv: ivtv_enc_thread: pid = 5089, itv = 0xf8afa1a4 Jul 19 23:15:39 teloche kernel: ivtv: ivtv_enc_vbi_thread: pid = 5090, itv = 0xf8afa1a4 Jul 19 23:15:39 teloche kernel: ivtv: Switching standard to PAL. Jul 19 23:15:39 teloche kernel: ivtv: Initialized WinTV PVR 150, card #1 Jul 19 23:15:39 teloche kernel: ivtv: ==================== END INIT IVTV ==================== Setting up channels: -------------------- teloche:~# ptune-ui.pl Channel changed to SE11, freq = '231250' And capture: ------------ teloche:~# cat /dev/video0 > SE11.mpg Output from /var/log/messages: ----------------------------- Jul 19 23:17:37 teloche kernel: ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) Jul 19 23:17:37 teloche kernel: ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444 Jul 19 23:17:37 teloche kernel: ivtv: Setup VBI start 0x002fea04 frames 4 fpi 1 lines 0x00000140 The result is a mpg file that I can play in mplayer or Totem without problem, quality of picture is good but no sound ... ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
