I had a problem like yours. Your tda9887 module needs to load before the tveeprom module. I fixed my Gentoo by modifying my /etc/modules.autoload.d/kernel-2.6 to have tda9887 above ivtv.
Also, your etc/modules/ivtv has lines which I don't think are needed anymore. Here's the one which works correctly for me... ( of course you'll need to add a line for your lirc support ) alias char-major-81 videodev alias char-major-81-0 ivtv alias char-major-81-1 ivtv options cx25840 i2c_enable=1 options saa7127 i2c_enable=-1 So, basically... since the init.ivtv shows your cx25840 audio input is (0) and you still have no sound... try loading the tda9887 module before you load the ivtv module. --Camisa On Wed, 2005-07-20 at 10:44 +0200, [EMAIL PROTECTED] wrote: > Hello, > > I try to configure the last release for the ivtv driver:ivtv: version 0.3.6 > (z) > > Video capture output produce a good quality, but no sound ... > I'm running Debian Sarge with: > 1 GB RAM > Athlon 2800 > > This is my first ivtv installation. Then, I followed the instructions on > > > http://ivtv.writeme.ch > > Driver was compiled without problems. > I live in a PAL country (in Switzerland) > After several days spend to read forums and documentations, unfortunately, > I cannot find what is wrong. Could you please check if my configuration is > ok ? > > Question: > --------- > I think I don't need to connect my sound card to my PVR-500 to have sound, > correct ? > > Thanks for your help and have a nice day > > Jean > > My modules settings: > -------------------- > teloche:/etc/modutils# pwd > /etc/modutils > teloche:/etc/modutils# cat ivtv > # ivtv settings > alias char-major-61 lirc_i2c > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > alias /dev/v4l ivtv > options cx25840 no_black_magic=1 > options cx25840 i2c_enable=1 > options ivtv ivtv_debug=2 ivtv_pal=1 ivtv_std=1 # cardtype=6 > options tuner pal=1 > options saa7127 enable_output=1 output_select=0 pal=1 > options msp3400 once=1 simple=1 > add below ivtv msp3400 saa7115 saa7127 tuner > add above ivtv lirc_dev lirc_i2c # ivtv-fb > post-install ivtv /usr/local/bin/ivtvctl -d /dev/video0 -u 0xff > #post-install ivtv /usr/local/bin/ivtvctl -d /dev/video1 -u 0xff > > teloche:/etc/modutils# > > Loading modules: > ---------------- > modprobe ivtv > > teloche:/etc/modutils# lsmod > Module Size Used by > tda9887 14360 0 > wm8775 10392 0 > cx25840 43304 0 > firmware_class 10624 1 cx25840 > tuner 21540 0 > tveeprom 14260 0 > ivtv 1349380 1 > i2c_algo_bit 9992 1 ivtv > videodev 10368 2 ivtv > snd_intel8x0 32704 1 > snd_ac97_codec 75648 1 snd_intel8x0 > snd_pcm_oss 53664 0 > snd_mixer_oss 20480 2 snd_pcm_oss > snd_pcm 93320 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss > snd_timer 26628 1 snd_pcm > snd 55140 6 > snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer > soundcore 10720 2 snd > snd_page_alloc 10116 2 snd_intel8x0,snd_pcm > i2c_nforce2 6784 0 > i2c_core 23312 7 > tda9887,wm8775,cx25840,tuner,tveeprom,i2c_algo_bit,i2c_nforce2 > ext3 136072 4 > jbd 63256 1 ext3 > analog 12192 0 > gameport 4992 1 analog > floppy 60496 0 > pcspkr 3940 0 > rtc 13496 0 > amd74xx 13980 0 [permanent] > ehci_hcd 47112 0 > ohci_hcd 32008 0 > usbcore 131704 3 ehci_hcd,ohci_hcd > amd64_agp 12744 1 > agpgart 35240 1 amd64_agp > e100 36224 0 > mii 5248 1 e100 > evdev 9728 0 > psmouse 29832 0 > ide_generic 1408 0 [permanent] > ide_disk 18176 0 > ide_cd 42244 0 > cdrom 41248 1 ide_cd > ide_scsi 16644 0 > ide_core 133416 5 amd74xx,ide_generic,ide_disk,ide_cd,ide_scsi > sd_mod 19472 7 > sata_sil 8836 0 > sata_nv 9476 5 > libata 48516 2 sata_sil,sata_nv > scsi_mod 139080 3 ide_scsi,sd_mod,libata > unix 29620 492 > teloche:/etc/modutils# > > Output from /var/log/messages: > ----------------------------- > Jul 19 23:15:34 teloche kernel: Linux video capture interface: v1.00 > Jul 19 23:15:34 teloche kernel: ivtv: > ==================== START INIT IVTV ==================== > Jul 19 23:15:34 teloche kernel: ivtv: version 0.3.6 (z) loading > Jul 19 23:15:34 teloche kernel: ivtv: Linux version: 2.6.11.12juillet preempt > K8 gcc-3.3 > Jul 19 23:15:34 teloche kernel: ivtv: In case of problems please include > the debug info > Jul 19 23:15:34 teloche kernel: ivtv: between the START INIT IVTV and END > INIT IVTV lines when > Jul 19 23:15:34 teloche kernel: ivtv: mailing the ivtv-devel mailinglist. > Jul 19 23:15:34 teloche kernel: ivtv: Autodetected WinTV PVR 150 card > Jul 19 23:15:34 teloche kernel: ivtv: Found an iTVC16 based chip > Jul 19 23:15:34 teloche kernel: ivtv: XXX PCI device: 0x00e1 vendor: 0x10de > Jul 19 23:15:34 teloche kernel: tveeprom: Hauppauge: model = 23559, rev = > D591, serial# = 8201302 > Jul 19 23:15:34 teloche kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx > = 91, type = 56) > Jul 19 23:15:34 teloche kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) > SECAM(L/L) > PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > Jul 19 23:15:34 teloche kernel: tveeprom: audio_processor = MSP3410D (type > = 5) > Jul 19 23:15:34 teloche kernel: ivtv: i2c attach [client=tveeprom[50],ok] > Jul 19 23:15:34 teloche kernel: ivtv: Tuner Type 56, Tuner formats 0x00400e17, > Radio: yes, Model 0x00915651, Revision 0x00000000 > Jul 19 23:15:34 teloche kernel: ivtv: PAL tuner detected > Jul 19 23:15:34 teloche kernel: ivtv: Radio detected > Jul 19 23:15:34 teloche kernel: tuner: Ignoring new-style parameters in > presence > of obsolete ones > Jul 19 23:15:34 teloche kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv > i2c driver #0 > Jul 19 23:15:34 teloche kernel: ivtv: i2c attach [client=(tuner unset),ok] > Jul 19 23:15:34 teloche kernel: cx25840: requesting /lib/modules/HcwMakoA.ROM > Jul 19 23:15:35 teloche kernel: cx25840: firmware loaded > Jul 19 23:15:35 teloche kernel: ivtv: i2c attach [client=cx25840[50],ok] > Jul 19 23:15:35 teloche kernel: ivtv: i2c attach [client=wm8775[50],ok] > Jul 19 23:15:35 teloche kernel: tda9885/6/7: chip found @ 0x86 > Jul 19 23:15:35 teloche kernel: ivtv: i2c attach [client=tda9887,ok] > Jul 19 23:15:36 teloche kernel: ivtv: Encoder revision: 0x02050032 > Jul 19 23:15:36 teloche kernel: ivtv: Encoder Firmware may be buggy, use > version 0x02040011 > Jul 19 23:15:36 teloche kernel: ivtv: Configuring WinTV PVR 150 card with > 5 streams > Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder > MPEG minor 0 > Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder MPEG stream: 0 x > 32768 buffers (0KB total) > Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder > YUV minor 32 > Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder YUV stream: 0 x > 12960 buffers (0KB total) > Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder > VBI minor 224 > Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder VBI stream: 0 x > 12740 buffers (0KB total) > Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder > PCM audio minor 24 > Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder PCM audio stream: > 0 x 4608 buffers (0KB total) > Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder > radio minor 64 > Jul 19 23:15:36 teloche kernel: ivtv: Create encoder radio stream > Jul 19 23:15:36 teloche kernel: ivtv: Setting Tuner 56 > Jul 19 23:15:36 teloche kernel: tuner: type set to 56 (Philips PAL/SECAM > multi (FQ1216AME MK4)) by ivtv i2c driver #0 > Jul 19 23:15:36 teloche kernel: ivtv: ivtv_enc_thread: pid = 4982, itv = > 0xf8ad6ea0 > Jul 19 23:15:36 teloche kernel: ivtv: ivtv_enc_vbi_thread: pid = 4983, itv > = 0xf8ad6ea0 > Jul 19 23:15:36 teloche kernel: ivtv: Switching standard to PAL. > Jul 19 23:15:36 teloche kernel: ivtv: Initialized WinTV PVR 150, card #0 > Jul 19 23:15:36 teloche kernel: ivtv: Autodetected WinTV PVR 150 card > Jul 19 23:15:36 teloche kernel: ivtv: Found an iTVC16 based chip > Jul 19 23:15:36 teloche kernel: ivtv: XXX PCI device: 0x00e1 vendor: 0x10de > Jul 19 23:15:36 teloche kernel: tveeprom: Hauppauge: model = 23559, rev = > D591, serial# = 8201302 > Jul 19 23:15:36 teloche kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx > = 91, type = 56) > Jul 19 23:15:36 teloche kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) > SECAM(L/L) > PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > Jul 19 23:15:36 teloche kernel: tveeprom: audio_processor = MSP3410D (type > = 5) > Jul 19 23:15:36 teloche kernel: ivtv: i2c attach [client=tveeprom[50],ok] > Jul 19 23:15:36 teloche kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv > i2c driver #1 > Jul 19 23:15:36 teloche kernel: ivtv: i2c attach [client=(tuner unset),ok] > Jul 19 23:15:36 teloche kernel: cx25840: requesting /lib/modules/HcwMakoA.ROM > Jul 19 23:15:38 teloche kernel: cx25840: firmware loaded > Jul 19 23:15:38 teloche kernel: ivtv: i2c attach [client=cx25840[50],ok] > Jul 19 23:15:38 teloche kernel: ivtv: i2c attach [client=wm8775[50],ok] > Jul 19 23:15:38 teloche kernel: tda9885/6/7: chip found @ 0x86 > Jul 19 23:15:38 teloche kernel: ivtv: i2c attach [client=tda9887,ok] > Jul 19 23:15:38 teloche kernel: ivtv: Tuner Type 56, Tuner formats 0x00400e17, > Radio: yes, Model 0x00915651, Revision 0x00000000 > Jul 19 23:15:38 teloche kernel: ivtv: Radio detected > Jul 19 23:15:39 teloche kernel: ivtv: Encoder revision: 0x02050032 > Jul 19 23:15:39 teloche kernel: ivtv: Encoder Firmware may be buggy, use > version 0x02040011 > Jul 19 23:15:39 teloche kernel: ivtv: Configuring WinTV PVR 150 card with > 5 streams > Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder > MPEG minor 1 > Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder MPEG stream: 0 x > 32768 buffers (0KB total) > Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder > YUV minor 33 > Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder YUV stream: 0 x > 12960 buffers (0KB total) > Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder > VBI minor 225 > Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder VBI stream: 0 x > 12740 buffers (0KB total) > Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder > PCM audio minor 25 > Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder PCM audio stream: > 0 x 4608 buffers (0KB total) > Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder > radio minor 65 > Jul 19 23:15:39 teloche kernel: ivtv: Create encoder radio stream > Jul 19 23:15:39 teloche kernel: ivtv: Setting Tuner 56 > Jul 19 23:15:39 teloche kernel: tuner: type set to 56 (Philips PAL/SECAM > multi (FQ1216AME MK4)) by ivtv i2c driver #1 > Jul 19 23:15:39 teloche kernel: ivtv: ivtv_enc_thread: pid = 5089, itv = > 0xf8afa1a4 > Jul 19 23:15:39 teloche kernel: ivtv: ivtv_enc_vbi_thread: pid = 5090, itv > = 0xf8afa1a4 > Jul 19 23:15:39 teloche kernel: ivtv: Switching standard to PAL. > Jul 19 23:15:39 teloche kernel: ivtv: Initialized WinTV PVR 150, card #1 > Jul 19 23:15:39 teloche kernel: ivtv: ==================== END INIT IVTV > ==================== > > Setting up channels: > -------------------- > teloche:~# ptune-ui.pl > Channel changed to SE11, freq = '231250' > > And capture: > ------------ > teloche:~# cat /dev/video0 > SE11.mpg > > Output from /var/log/messages: > ----------------------------- > Jul 19 23:17:37 teloche kernel: ivtv: Allocate DMA encoder MPEG stream: 128 > x 32768 buffers (4096KB total) > Jul 19 23:17:37 teloche kernel: ivtv: Setup VBI API header 0x0000bd0d pkts > 1 buffs 4 ln 36 sz 1444 > Jul 19 23:17:37 teloche kernel: ivtv: Setup VBI start 0x002fea04 frames 4 > fpi 1 lines 0x00000140 > > The result is a mpg file that I can play in mplayer or Totem without problem, > quality of picture is good but no sound ... > > > > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > from IBM. Find simple to follow Roadmaps, straightforward articles, > informative Webcasts and more! Get everything you need to get up to > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
