Used to have the same problem here as well. If the loading of the tda9887 module doesn't help you (it made no difference for my setup), you can try using the patch I posted here: http://www.gossamer-threads.com/lists/ivtv/devel/22272
Regards, Petter On 7/20/05, Chris Camisa <[EMAIL PROTECTED]> wrote: > I had a problem like yours. Your tda9887 module needs to load before > the tveeprom module. I fixed my Gentoo by modifying > my /etc/modules.autoload.d/kernel-2.6 to have tda9887 above ivtv. > > Also, your etc/modules/ivtv has lines which I don't think are needed > anymore. > > Here's the one which works correctly for me... ( of course you'll need > to add a line for your lirc support ) > > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > options cx25840 i2c_enable=1 > options saa7127 i2c_enable=-1 > > So, basically... since the init.ivtv shows your cx25840 audio input is > (0) and you still have no sound... try loading the tda9887 module before > you load the ivtv module. > > > --Camisa > > > On Wed, 2005-07-20 at 10:44 +0200, [EMAIL PROTECTED] wrote: > > Hello, > > > > I try to configure the last release for the ivtv driver:ivtv: version 0.3.6 > > (z) > > > > Video capture output produce a good quality, but no sound ... > > I'm running Debian Sarge with: > > 1 GB RAM > > Athlon 2800 > > > > This is my first ivtv installation. Then, I followed the instructions on > > > > > > http://ivtv.writeme.ch > > > > Driver was compiled without problems. > > I live in a PAL country (in Switzerland) > > After several days spend to read forums and documentations, unfortunately, > > I cannot find what is wrong. Could you please check if my configuration is > > ok ? > > > > Question: > > --------- > > I think I don't need to connect my sound card to my PVR-500 to have sound, > > correct ? > > > > Thanks for your help and have a nice day > > > > Jean > > > > My modules settings: > > -------------------- > > teloche:/etc/modutils# pwd > > /etc/modutils > > teloche:/etc/modutils# cat ivtv > > # ivtv settings > > alias char-major-61 lirc_i2c > > alias char-major-81 videodev > > alias char-major-81-0 ivtv > > alias char-major-81-1 ivtv > > alias /dev/v4l ivtv > > options cx25840 no_black_magic=1 > > options cx25840 i2c_enable=1 > > options ivtv ivtv_debug=2 ivtv_pal=1 ivtv_std=1 # cardtype=6 > > options tuner pal=1 > > options saa7127 enable_output=1 output_select=0 pal=1 > > options msp3400 once=1 simple=1 > > add below ivtv msp3400 saa7115 saa7127 tuner > > add above ivtv lirc_dev lirc_i2c # ivtv-fb > > post-install ivtv /usr/local/bin/ivtvctl -d /dev/video0 -u 0xff > > #post-install ivtv /usr/local/bin/ivtvctl -d /dev/video1 -u 0xff > > > > teloche:/etc/modutils# > > > > Loading modules: > > ---------------- > > modprobe ivtv > > > > teloche:/etc/modutils# lsmod > > Module Size Used by > > tda9887 14360 0 > > wm8775 10392 0 > > cx25840 43304 0 > > firmware_class 10624 1 cx25840 > > tuner 21540 0 > > tveeprom 14260 0 > > ivtv 1349380 1 > > i2c_algo_bit 9992 1 ivtv > > videodev 10368 2 ivtv > > snd_intel8x0 32704 1 > > snd_ac97_codec 75648 1 snd_intel8x0 > > snd_pcm_oss 53664 0 > > snd_mixer_oss 20480 2 snd_pcm_oss > > snd_pcm 93320 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss > > snd_timer 26628 1 snd_pcm > > snd 55140 6 > > snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer > > soundcore 10720 2 snd > > snd_page_alloc 10116 2 snd_intel8x0,snd_pcm > > i2c_nforce2 6784 0 > > i2c_core 23312 7 > > tda9887,wm8775,cx25840,tuner,tveeprom,i2c_algo_bit,i2c_nforce2 > > ext3 136072 4 > > jbd 63256 1 ext3 > > analog 12192 0 > > gameport 4992 1 analog > > floppy 60496 0 > > pcspkr 3940 0 > > rtc 13496 0 > > amd74xx 13980 0 [permanent] > > ehci_hcd 47112 0 > > ohci_hcd 32008 0 > > usbcore 131704 3 ehci_hcd,ohci_hcd > > amd64_agp 12744 1 > > agpgart 35240 1 amd64_agp > > e100 36224 0 > > mii 5248 1 e100 > > evdev 9728 0 > > psmouse 29832 0 > > ide_generic 1408 0 [permanent] > > ide_disk 18176 0 > > ide_cd 42244 0 > > cdrom 41248 1 ide_cd > > ide_scsi 16644 0 > > ide_core 133416 5 amd74xx,ide_generic,ide_disk,ide_cd,ide_scsi > > sd_mod 19472 7 > > sata_sil 8836 0 > > sata_nv 9476 5 > > libata 48516 2 sata_sil,sata_nv > > scsi_mod 139080 3 ide_scsi,sd_mod,libata > > unix 29620 492 > > teloche:/etc/modutils# > > > > Output from /var/log/messages: > > ----------------------------- > > Jul 19 23:15:34 teloche kernel: Linux video capture interface: v1.00 > > Jul 19 23:15:34 teloche kernel: ivtv: > > ==================== START INIT IVTV ==================== > > Jul 19 23:15:34 teloche kernel: ivtv: version 0.3.6 (z) loading > > Jul 19 23:15:34 teloche kernel: ivtv: Linux version: 2.6.11.12juillet > > preempt > > K8 gcc-3.3 > > Jul 19 23:15:34 teloche kernel: ivtv: In case of problems please include > > the debug info > > Jul 19 23:15:34 teloche kernel: ivtv: between the START INIT IVTV and END > > INIT IVTV lines when > > Jul 19 23:15:34 teloche kernel: ivtv: mailing the ivtv-devel mailinglist. > > Jul 19 23:15:34 teloche kernel: ivtv: Autodetected WinTV PVR 150 card > > Jul 19 23:15:34 teloche kernel: ivtv: Found an iTVC16 based chip > > Jul 19 23:15:34 teloche kernel: ivtv: XXX PCI device: 0x00e1 vendor: 0x10de > > Jul 19 23:15:34 teloche kernel: tveeprom: Hauppauge: model = 23559, rev = > > D591, serial# = 8201302 > > Jul 19 23:15:34 teloche kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx > > = 91, type = 56) > > Jul 19 23:15:34 teloche kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) > > SECAM(L/L) > > PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > > Jul 19 23:15:34 teloche kernel: tveeprom: audio_processor = MSP3410D (type > > = 5) > > Jul 19 23:15:34 teloche kernel: ivtv: i2c attach [client=tveeprom[50],ok] > > Jul 19 23:15:34 teloche kernel: ivtv: Tuner Type 56, Tuner formats > > 0x00400e17, > > Radio: yes, Model 0x00915651, Revision 0x00000000 > > Jul 19 23:15:34 teloche kernel: ivtv: PAL tuner detected > > Jul 19 23:15:34 teloche kernel: ivtv: Radio detected > > Jul 19 23:15:34 teloche kernel: tuner: Ignoring new-style parameters in > > presence > > of obsolete ones > > Jul 19 23:15:34 teloche kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv > > i2c driver #0 > > Jul 19 23:15:34 teloche kernel: ivtv: i2c attach [client=(tuner unset),ok] > > Jul 19 23:15:34 teloche kernel: cx25840: requesting > > /lib/modules/HcwMakoA.ROM > > Jul 19 23:15:35 teloche kernel: cx25840: firmware loaded > > Jul 19 23:15:35 teloche kernel: ivtv: i2c attach [client=cx25840[50],ok] > > Jul 19 23:15:35 teloche kernel: ivtv: i2c attach [client=wm8775[50],ok] > > Jul 19 23:15:35 teloche kernel: tda9885/6/7: chip found @ 0x86 > > Jul 19 23:15:35 teloche kernel: ivtv: i2c attach [client=tda9887,ok] > > Jul 19 23:15:36 teloche kernel: ivtv: Encoder revision: 0x02050032 > > Jul 19 23:15:36 teloche kernel: ivtv: Encoder Firmware may be buggy, use > > version 0x02040011 > > Jul 19 23:15:36 teloche kernel: ivtv: Configuring WinTV PVR 150 card with > > 5 streams > > Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder > > MPEG minor 0 > > Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder MPEG stream: 0 x > > 32768 buffers (0KB total) > > Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder > > YUV minor 32 > > Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder YUV stream: 0 x > > 12960 buffers (0KB total) > > Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder > > VBI minor 224 > > Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder VBI stream: 0 x > > 12740 buffers (0KB total) > > Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder > > PCM audio minor 24 > > Jul 19 23:15:36 teloche kernel: ivtv: Create DMA encoder PCM audio stream: > > 0 x 4608 buffers (0KB total) > > Jul 19 23:15:36 teloche kernel: ivtv: Registered v4l2 device for encoder > > radio minor 64 > > Jul 19 23:15:36 teloche kernel: ivtv: Create encoder radio stream > > Jul 19 23:15:36 teloche kernel: ivtv: Setting Tuner 56 > > Jul 19 23:15:36 teloche kernel: tuner: type set to 56 (Philips PAL/SECAM > > multi (FQ1216AME MK4)) by ivtv i2c driver #0 > > Jul 19 23:15:36 teloche kernel: ivtv: ivtv_enc_thread: pid = 4982, itv = > > 0xf8ad6ea0 > > Jul 19 23:15:36 teloche kernel: ivtv: ivtv_enc_vbi_thread: pid = 4983, itv > > = 0xf8ad6ea0 > > Jul 19 23:15:36 teloche kernel: ivtv: Switching standard to PAL. > > Jul 19 23:15:36 teloche kernel: ivtv: Initialized WinTV PVR 150, card #0 > > Jul 19 23:15:36 teloche kernel: ivtv: Autodetected WinTV PVR 150 card > > Jul 19 23:15:36 teloche kernel: ivtv: Found an iTVC16 based chip > > Jul 19 23:15:36 teloche kernel: ivtv: XXX PCI device: 0x00e1 vendor: 0x10de > > Jul 19 23:15:36 teloche kernel: tveeprom: Hauppauge: model = 23559, rev = > > D591, serial# = 8201302 > > Jul 19 23:15:36 teloche kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx > > = 91, type = 56) > > Jul 19 23:15:36 teloche kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) > > SECAM(L/L) > > PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > > Jul 19 23:15:36 teloche kernel: tveeprom: audio_processor = MSP3410D (type > > = 5) > > Jul 19 23:15:36 teloche kernel: ivtv: i2c attach [client=tveeprom[50],ok] > > Jul 19 23:15:36 teloche kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv > > i2c driver #1 > > Jul 19 23:15:36 teloche kernel: ivtv: i2c attach [client=(tuner unset),ok] > > Jul 19 23:15:36 teloche kernel: cx25840: requesting > > /lib/modules/HcwMakoA.ROM > > Jul 19 23:15:38 teloche kernel: cx25840: firmware loaded > > Jul 19 23:15:38 teloche kernel: ivtv: i2c attach [client=cx25840[50],ok] > > Jul 19 23:15:38 teloche kernel: ivtv: i2c attach [client=wm8775[50],ok] > > Jul 19 23:15:38 teloche kernel: tda9885/6/7: chip found @ 0x86 > > Jul 19 23:15:38 teloche kernel: ivtv: i2c attach [client=tda9887,ok] > > Jul 19 23:15:38 teloche kernel: ivtv: Tuner Type 56, Tuner formats > > 0x00400e17, > > Radio: yes, Model 0x00915651, Revision 0x00000000 > > Jul 19 23:15:38 teloche kernel: ivtv: Radio detected > > Jul 19 23:15:39 teloche kernel: ivtv: Encoder revision: 0x02050032 > > Jul 19 23:15:39 teloche kernel: ivtv: Encoder Firmware may be buggy, use > > version 0x02040011 > > Jul 19 23:15:39 teloche kernel: ivtv: Configuring WinTV PVR 150 card with > > 5 streams > > Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder > > MPEG minor 1 > > Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder MPEG stream: 0 x > > 32768 buffers (0KB total) > > Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder > > YUV minor 33 > > Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder YUV stream: 0 x > > 12960 buffers (0KB total) > > Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder > > VBI minor 225 > > Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder VBI stream: 0 x > > 12740 buffers (0KB total) > > Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder > > PCM audio minor 25 > > Jul 19 23:15:39 teloche kernel: ivtv: Create DMA encoder PCM audio stream: > > 0 x 4608 buffers (0KB total) > > Jul 19 23:15:39 teloche kernel: ivtv: Registered v4l2 device for encoder > > radio minor 65 > > Jul 19 23:15:39 teloche kernel: ivtv: Create encoder radio stream > > Jul 19 23:15:39 teloche kernel: ivtv: Setting Tuner 56 > > Jul 19 23:15:39 teloche kernel: tuner: type set to 56 (Philips PAL/SECAM > > multi (FQ1216AME MK4)) by ivtv i2c driver #1 > > Jul 19 23:15:39 teloche kernel: ivtv: ivtv_enc_thread: pid = 5089, itv = > > 0xf8afa1a4 > > Jul 19 23:15:39 teloche kernel: ivtv: ivtv_enc_vbi_thread: pid = 5090, itv > > = 0xf8afa1a4 > > Jul 19 23:15:39 teloche kernel: ivtv: Switching standard to PAL. > > Jul 19 23:15:39 teloche kernel: ivtv: Initialized WinTV PVR 150, card #1 > > Jul 19 23:15:39 teloche kernel: ivtv: ==================== END INIT IVTV > > ==================== > > > > Setting up channels: > > -------------------- > > teloche:~# ptune-ui.pl > > Channel changed to SE11, freq = '231250' > > > > And capture: > > ------------ > > teloche:~# cat /dev/video0 > SE11.mpg > > > > Output from /var/log/messages: > > ----------------------------- > > Jul 19 23:17:37 teloche kernel: ivtv: Allocate DMA encoder MPEG stream: 128 > > x 32768 buffers (4096KB total) > > Jul 19 23:17:37 teloche kernel: ivtv: Setup VBI API header 0x0000bd0d pkts > > 1 buffs 4 ln 36 sz 1444 > > Jul 19 23:17:37 teloche kernel: ivtv: Setup VBI start 0x002fea04 frames 4 > > fpi 1 lines 0x00000140 > > > > The result is a mpg file that I can play in mplayer or Totem without > > problem, > > quality of picture is good but no sound ... > > > > > > > > ------------------------------------------------------- > > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > > from IBM. Find simple to follow Roadmaps, straightforward articles, > > informative Webcasts and more! Get everything you need to get up to > > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > > _______________________________________________ > > ivtv-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > > > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > from IBM. Find simple to follow Roadmaps, straightforward articles, > informative Webcasts and more! Get everything you need to get up to > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
