søn, 18 09 2005 kl. 17:44 +0200, skrev Hans Verkuil: > I'm keeping my fingers crossed,
Now works on my PVR 150 MCE. And now the "funny" stuff... I normally use xine to play videos, and everything works just fine, so I also use xine to test if there is any sound on my PVR 150, and there has never been any. But today I tried with mplayer, don't know why, just did... and what do I see^H^H^H hear: sound! :) So now I test with mplayer. There must exist a but in xine, because I tested the recorded mpeg stream on two different system using xine, and no sound. I might check older revisions of the driver to see which one enables the sound, but I'm busy all next week, so I have no time to play with it. Anyway keep up the great work! My girlfriend and I really appreciate it :) Data from my system, from dmesg: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.9 (development snapshot compiled on søn 18 sep 2005 21:17:47 CEST) loading ivtv: Linux version: 2.6.13 preempt PENTIUMIII gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) PCI: Enabling device 0000:02:0a.0 (0014 -> 0016) ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10 ivtv: Unreasonably low latency timer, setting to 64 (was 32) hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7958733 tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840: loading /lib/modules/HcwMakoA.ROM ivtv: i2c attach to card #0 ok [client=cx25840, addr=44] ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: Encoder revision: 0x02050032 ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv: Create encoder radio stream tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== ivtvctl --audio-status --video-status: cx25840: Status: 0x03 (REV_ID, Revision ID.) cx25840: Status: 'Mono' (Detected audio mode) cx25840: Status: 'A2-BG' (Detected audio standard) wm8775: Register R7=000 wm8775: Register R11=021 wm8775: Register R12=102 wm8775: Register R13=000 wm8775: Register R14=1d4 wm8775: Register R15=1d4 wm8775: Register R16=1bf wm8775: Register R17=185 wm8775: Register R18=0a2 wm8775: Register R19=005 wm8775: Register R20=07a wm8775: Register R21=102 wm8775: Register R23=000 cx25840: Status: 0x03 (REV_ID, Revision ID.) cx25840: Status: Video signal present cx25840: Status: 0x04 (MICROCNTL_VIDEO_FORMAT, Detected video format) cx25840: Status: Ready Filter auto tuning status cx25840: Status: 0x16 (TUNE_OUT, The tuning code selected by the auto-tune algorithm.) cx25840: Status: 0x00 (MV_CDAT, Macrovision Copy Control Bits as described in the MacroVision) cx25840: Status: 0x00 (MV_PSP, Macrovision Pseudo Sync Pulses detected) cx25840: Status: 0x00 (MV_CS, Macrovision Color Striping Detected) cx25840: Status: 0x00 (MV_T3CS, A 1 indicates the presence of type 3 of the color stripe process. A) cx25840: Status: 0x00 (MV_TYPE2_PAIR, Macrovision Type 2 pair detected) cx25840: Status: 0x04 (AFD_FMT_STAT, Currently detected Format) cx25840: Status: 0x00 (FIELD, Field status (even/odd)) cx25840: Status: 0x00 (SRC_FIFO_OFLOW, Sample Rate Converter FIFO Overflow) cx25840: Status: 0x00 (SRC_FIFO_UFLOW, Sample Rate Converter FIFO Underflow) cx25840: Status: 0x01 (VSYNC, Vertical sync) cx25840: Status: 0x01 (HLOCK, Horizontal lock status) cx25840: Status: 0x00 (SRC_LOCK, Sample Rate Converter lock Status) cx25840: Status: 0x01 (VLOCK, Vertical lock status) cx25840: Status: 0x01 (CSC_LOCK, Color Subcarrier lock status) cx25840: Status: 0x01 (AGC_LOCK, VGA lock status) cx25840: Status: 0x01 (VPRES, Active-high video present. Indication of the presence of a) cx25840: Status: 0x01 (SPECIAL_PLAY_N, Active-low special play mode (fast forward, rewind, pulse, or slow) -- Mvh. / Kind regards Henrik Farre - http://www.rockhopper.dk
signature.asc
Description: This is a digitally signed message part
