Hans Verkuil <[EMAIL PROTECTED]> wrote: > On Sunday 18 September 2005 18:43, Scott Harris wrote: > > > -----Original Message----- > > > But the proof of the pudding is in the eating: so please > test!
No sound on my PVR-150MCE as of yet. I have no options in modprobe.conf Dmesg output : ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.9 (development svn snapshot revision 2693) loading ivtv: Linux version: 2.6.11-1.1369_FC4 686 REGPARM 4KSTACKS gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7863203 tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840: loading /lib/modules/HcwMakoA.ROM ivtv: i2c attach to card #0 ok [client=cx25840, addr=44] ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: Encoder revision: 0x02050032 ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv: Create encoder radio stream tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== A little further down is a small complaint : cx25840: decoder set size: ignoring bad config request Hsrc=720 Vsrc=576 width=720 height=576 This i guess could be related to the aspect ratio i am using in Mythtv. If i can provide any further information, please let me know. Best regards Niels Hoffmann ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
