Hans,
my 350 and 150 are still working ok with revision 2693
The only problem I still have is that on some channes when I change to
them it takes between 10 and 60 seconds for the audio to kick in.
It are always the same channels.
Regards,
Michel.
------------
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.9 (development svn snapshot revision 2693) loading
ivtv: Linux version: 2.6.12-1.1447_FC4smp SMP 686 REGPARM 4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 193
tveeprom: Hauppauge: model = 26059, rev = C155, serial# = 7583011
tveeprom: tuner = Philips FQ1216ME MK3 (idx = 55, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv: i2c attach to card #0 ok [client=cx25840, addr=44]
ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv
i2c driver #0
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ====================== NEXT CARD ======================
ivtv: Autodetected WinTV PVR 350 card (iTVC15 based)
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 201
tveeprom: Hauppauge: model = 48134, rev = I121, serial# = 6182877
tveeprom: tuner = Philips FM1216 (idx = 21, type = 5)
tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
tveeprom: audio processor = MSP4418 (type = 19)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
ivtv: i2c attach to card #1 ok [client=saa7115[50], addr=21]
saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c driver #1)
ivtv: i2c attach to card #1 ok [client=saa7127, addr=44]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Sep 18 2005 15:37:37
ivtv: i2c attach to card #1 ok [client=MSP3418W-A2, addr=40]
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: loading /lib/modules/ivtv-fw-dec.bin
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Decoder revision: 0x02020023
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv: Create encoder radio stream
ivtv: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv: Create decoder VOUT stream
ivtv: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by ivtv
i2c driver #1
ivtv: Initialized WinTV PVR 350, card #1
ivtv: ==================== END INIT IVTV ====================
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
