Beste Hans,
Please go with svn, I feel better that way :-)
I've just gone with svn. First test (not using mythtv, I'm @ workplace.. ssh
only) seems to be ok. I've compiled the svn version. Tuned the tuners
and did a
cat from both /dev/video0 and /dev/video1 to different mpg files. Pulled them
over to my local machine and both have video and sound.
I'll do an extensive test tonight @ home.
Install the latest svn version, reboot, test and post your dmesg output
(the usual bits between IVTV START and END). If you are using any module
options then please remove them first. Can you also give (again) a
description of what your problem is? I got confused by all the different
problems floating around :-)
My problem:
having no sound with mythtv on tuner 2 watching liveTV during a recording
session on tuner 1. Tuner 1 does have sound, I've checked the recordings of
tuner 1.
Strange things: I don't have that issue while watching LiveTV with PiP, I can
switch the channels with the N button and audio of the right tuner comes up.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.9 (development svn snapshot revision 2702) loading
ivtv: Linux version: 2.6.13-sempron-r1 preempt K8 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [LNKB] -> GSI 19 (level,
low) -> IRQ
19
tveeprom: Second (radio) tuner idx 101
tveeprom: ivtv version
tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 7966089
tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 =
0x00400e17)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
ivtv: This is the first unit of a PVR500
tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
TEA5767 detected.
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60]
tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect
type set to 62 (Philips TEA5767HN FM Radio)
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv: i2c attach to card #0 ok [client=cx25840, addr=44]
ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b]
tda9885/6/7: (ivtv) chip found @ 0x86
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv: Detected a TEA5767 radio tuner. Enabling radio support.
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv: Create encoder radio stream
tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c
driver #0
ivtv: Initialized WinTV PVR 500 (unit #1), card #0
ivtv: ====================== NEXT CARD ======================
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI Interrupt 0000:03:09.0[A] -> Link [LNKC] -> GSI 18 (level,
low) -> IRQ
20
tveeprom: Second (radio) tuner idx 101
tveeprom: ivtv version
tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 7966089
tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 =
0x00400e17)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv: i2c attach to card #1 ok [client=cx25840, addr=44]
ivtv: i2c attach to card #1 ok [client=wm8775, addr=1b]
tda9885/6/7: (ivtv) chip found @ 0x86
ivtv: i2c attach to card #1 ok [client=tda9887, addr=43]
ivtv: This is the second unit of a PVR500
ivtv: Correcting tveeprom data: no radio present on second unit
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c
driver #1
ivtv: Initialized WinTV PVR 500 (unit #2), card #1
ivtv: ==================== END INIT IVTV ====================
Now I'm not sure if I should get the "buggy" firmware message. I guess so.
Gentoo ebuilds all tell me to link /lib/modules/HcwFalcn.rom to
ivtv-fw-end.bin
Is that correct? Or should the pvr-150mce / pvr-500mce still use the
ivtv-fw-enc.bin that comes from the .exe file
(ftp://ftp.shspvr.com/download/wintv-pvr_250-350/win9x-2k-xp_mpeg_wdm_drv/pvr48wdm_1.8.22037.exe)
Jelle Kalf.
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
