On 13.08.2016 17:31, David M Brooke wrote: > Thanks kp. > >> On 13 Aug 2016, at 13:57, kp kirchdoerfer <[email protected]> >> wrote: >> >> Am Samstag, 13. August 2016, 11:56:26 schrieb David M Brooke: >>> Thanks for the feedback. >>> >>> @Andrew - removing ‘quiet’ didn’t provide any further diagnostics. >>> >>> I upgraded to the latest APU2 BIOS / firmware to see if that helped. >>> Since that supports iPXE boot I was able to pull in the BuC x86_64 kernel >>> and initrd, initmod. That worked fine so there’s no compatibility issue, >>> but it still doesn’t want to boot from the SD. >>> >>> @kp - which device are you using to boot from - an mSATA drive, USB or the >>> SD slot? Maybe I need to invest in a small mSATA drive. >> I boot from mSATA, also USB worked, at least for the installation. > I have USB boot working now. There’s no output from the kernel while it is > booting but if you wait > you get a login prompt. Wrong serial port specified in 'console=' parameter?...
------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohodev2dev ------------------------------------------------------------------------ leaf-user mailing list: [email protected] https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
