> On 15 Aug 2016, at 11:38, Andrew <[email protected]> wrote:
>
> On 13.08.2016 17:31, David M Brooke wrote:
>> Thanks kp.
>>
>>> On 13 Aug 2016, at 13:57, kp kirchdoerfer <[email protected]>
>>> wrote:
>>>
>>> Am Samstag, 13. August 2016, 11:56:26 schrieb David M Brooke:
>>>> Thanks for the feedback.
>>>>
>>>> @Andrew - removing ‘quiet’ didn’t provide any further diagnostics.
>>>>
>>>> I upgraded to the latest APU2 BIOS / firmware to see if that helped.
>>>> Since that supports iPXE boot I was able to pull in the BuC x86_64 kernel
>>>> and initrd, initmod. That worked fine so there’s no compatibility issue,
>>>> but it still doesn’t want to boot from the SD.
>>>>
>>>> @kp - which device are you using to boot from - an mSATA drive, USB or the
>>>> SD slot? Maybe I need to invest in a small mSATA drive.
>>> I boot from mSATA, also USB worked, at least for the installation.
>> I have USB boot working now. There’s no output from the kernel while it is
>> booting but if you wait
>> you get a login prompt.
> Wrong serial port specified in 'console=' parameter?…
I used the x86_64_syslinux_serial115200 image which appears to have it set
correctly in syslinux/syslinux.cfg
console=ttyS0,115200n8
I’m sure I got kernel output when booting with iPXE, using the same console=
setting, so I’m puzzled
(but it’s working OK so I’m happy enough for now).
David
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. http://sdm.link/zohodev2dev
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
