Valerie. Herewith an extract from the files relating to your error number: ....................... 1. Repair your Legacy program by updating it.
2. Run File Maintenance - Check/Repair. Click on File> File Maintenance> Check/Repair and follow the prompts. If the error messages occur during the Check/Repair process, click No to continue with the repair. Do step 2 twice if errors are found. After doing steps 1 and 2, try Legacy again. If the program works, you can stop here. No further repairs are needed. If the program is still not functioning correctly, proceed with the following steps. 3. Export your records into a new Legacy family file: A. Click File on the menu bar and select Export To from the file menu. B. Choose Legacy File from the submenu and proceed. C. Give the file you will export to a new name and click Save. D. The Export screen will open. Please click the large Start Export button. (If you get a message about sources, click Don't Assign a Source.) E. Use the new family file and delete the old one when you are satisfied with the results. Try Legacy again. If the program works, you can stop here. No further repairs are needed. If the program is still not functioning correctly, proceed with the following steps. ................................. The rest is too much to include here (so is the above, really) and although I know your aversion to going to websites if the above doesn't work you will have to go to: http://www.legacyfamilytree.com/helpJetServPk.asp Ron Ferguson _____________________________________________________________________ For Genealogy, Software and Social visit: http://www.fergys.co.uk New Blog: Open Legacy Family File with Open Office View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _____________________________________________________________________ > From: [EMAIL PROTECTED] > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] First wife > Date: Wed, 26 Mar 2008 21:57:01 +1100 > > I did a check/repair and got this error message: > > Error re-building deleted marriage list. Error 3021: No current record > etc > > 1. I do not know what to do about this is ? > > 2. To do the unlinking should I unlink both of them and then link > the first wife first and then the second ? > > Regards from Valerie in sunny Sydney. > Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow > & Wexford > Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of ronald > ferguson > Sent: Wednesday, 26 March 2008 8:54 PM > To: legacyusergroup@legacyfamilytree.com > Subject: RE: [LegacyUG] First wife > > > > Valerie, > > In that case try doing File>File Maintenance>Check/Repair. The method > given is the only way of putting them in order other than unlinking and > relinking in the correct order. > > > Ron Ferguson > > _____________________________________________________________________ > > For Genealogy, Software and Social visit: http://www.fergys.co.uk New > Blog: Open Legacy Family File with Open Office View the Grimshaw Family > Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. > England See: http://myweb.tiscali.co.uk/fergys/ > _____________________________________________________________________ > > > >> From: [EMAIL PROTECTED] >> To: LegacyUserGroup@legacyfamilytree.com >> Subject: RE: [LegacyUG] First wife >> Date: Wed, 26 Mar 2008 20:44:33 +1100 >> >> Oh yes I haveae tried that but I can not get the first wife to appear >> first in a descendent chart >> >> Regards from Valerie in sunny Sydney. >> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, >> Wicklow & Wexford Guild of One-Name Studies No: 4825 for CULLODEN & >> HIGGINSON >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of Cathy >> Sent: Wednesday, 26 March 2008 1:20 PM >> To: LegacyUserGroup@legacyfamilytree.com >> Subject: Re: [LegacyUG] First wife >> >> >> In Family View, Right click on Husband, choose View Wife List and then > >> order the wives correctly. >> >> Cathy >> >> At 10:15 AM 26/03/2008, you wrote: >> >>>I can not find [ having looked at the help menu ] how to make the >>>first >> >>>wife the first wife in the reports. >>> >>>Regards from Valerie in sunny Sydney. >> > > _________________________________________________________________ > Get Hotmail on your mobile. Text MSN to 63463 now! > http://mobile.uk.msn.com/pc/mail.aspx > > > Legacy User Group guidelines: > http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > > > > > > Legacy User Group guidelines: > http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp > > > _________________________________________________________________ Get Hotmail on your mobile. Text MSN to 63463 now! http://mobile.uk.msn.com/pc/mail.aspx Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
