Thanks, Bruce -- we did that and confirmed it's set to gigabit.. but there seems to be concern from the Linux folks as mii-tools is reporting 100mbs and ethtool is not reporting anything...
Scott Rohling On Mon, Sep 29, 2008 at 10:33 AM, Bruce Hayden <[EMAIL PROTECTED]> wrote: > You'd need to get onto the HMC and use OSA Advanced facilities, select > to view port parameters, and it will show you the current settings. > > On Mon, Sep 29, 2008 at 12:21 PM, Scott Rohling <[EMAIL PROTECTED]> > wrote: > > Any ideas on how we can verify what the speed really is? Since they are > > seeing this number - there is now doubt in the air :-) > > > > Scott Rohling > > > > p.s. ethtool eth0 return 'No data available' > > > -- > Bruce Hayden > Linux on System z Advanced Technical Support > IBM, Endicott, NY > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390