On Sat, Apr 22, 2017 at 07:08:09AM +1200, Chris Packham wrote:
> The ADT7475 and ADT7476 have the STRT bit cleared by default[1]. Before any
> monitoring activities the STRT bit needs to be set. Logically this needs
> to happen before any of the sensors are read so the probe() function
> seems the best place for it.
>
> [1] - https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
>
> Signed-off-by: Chris Packham <chris.pack...@alliedtelesis.co.nz>
Applied.
Thanks,
Guenter
> ---
> drivers/hwmon/adt7475.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
> index fcfa48222145..c803e3c5fcd4 100644
> --- a/drivers/hwmon/adt7475.c
> +++ b/drivers/hwmon/adt7475.c
> @@ -59,6 +59,8 @@
> #define REG_VENDID 0x3E
> #define REG_DEVID2 0x3F
>
> +#define REG_CONFIG1 0x40
> +
> #define REG_STATUS1 0x41
> #define REG_STATUS2 0x42
>
> @@ -1371,6 +1373,17 @@ static int adt7475_probe(struct i2c_client *client,
> for (i = 0; i < ADT7475_PWM_COUNT; i++)
> adt7475_read_pwm(client, i);
>
> + /* Start monitoring */
> + switch (chip) {
> + case adt7475:
> + case adt7476:
> + i2c_smbus_write_byte_data(client, REG_CONFIG1,
> + adt7475_read(REG_CONFIG1) | 0x01);
> + break;
> + default:
> + break;
> + }
> +
> ret = sysfs_create_group(&client->dev.kobj, &adt7475_attr_group);
> if (ret)
> return ret;
