On Thu, Apr 27, 2017 at 11:19 AM, Jacopo Mondi
<jacopo+rene...@jmondi.org> wrote:
> Add bi-directional and output-enable pin configuration properties.
>
> bi-directional allows to specify when a pin shall operate in input and
> output mode at the same time. This is particularly useful in platforms
> where input and output buffers have to be manually enabled.
>
> output-enable is just syntactic sugar to specify that a pin shall
> operate in output mode, ignoring the provided argument.
> This pairs with input-enable pin configuration option.
For me it looks like you are trying to alias open-drain + bias or
alike. Don't actually see the benefit of it.
> Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
> ---
> Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 2 ++
> drivers/pinctrl/pinconf-generic.c | 3 +++
> include/linux/pinctrl/pinconf-generic.h | 3 +++
> 3 files changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> index bf3f7b0..f2ed458 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> @@ -222,6 +222,7 @@ bias-bus-hold - latch weakly
> bias-pull-up - pull up the pin
> bias-pull-down - pull down the pin
> bias-pull-pin-default - use pin-default pull state
> +bi-directional - pin supports simultaneous input/output operations
> drive-push-pull - drive actively high and low
> drive-open-drain - drive with open drain
> drive-open-source - drive with open source
> @@ -234,6 +235,7 @@ input-debounce - debounce mode with debound
> time X
> power-source - select between different power supplies
> low-power-enable - enable low power mode
> low-power-disable - disable low power mode
> +output-enable - enable output on pin regardless of output value
> output-low - set the pin to output mode with low level
> output-high - set the pin to output mode with high level
> slew-rate - set the slew rate
> diff --git a/drivers/pinctrl/pinconf-generic.c
> b/drivers/pinctrl/pinconf-generic.c
> index ce3335a..03e6808 100644
> --- a/drivers/pinctrl/pinconf-generic.c
> +++ b/drivers/pinctrl/pinconf-generic.c
> @@ -35,6 +35,7 @@ static const struct pin_config_item conf_items[] = {
> PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
> "input bias pull to pin specific state",
> NULL, false),
> PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL, false),
> + PCONFDUMP(PIN_CONFIG_BIDIRECTIONAL, "bi-directional pin operations",
> NULL, false),
> PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain",
> NULL, false),
> PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source",
> NULL, false),
> PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL,
> false),
> @@ -160,6 +161,7 @@ static const struct pinconf_generic_params dt_params[] = {
> { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
> { "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
> { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
> + { "bi-directional", PIN_CONFIG_BIDIRECTIONAL, 1 },
> { "drive-open-drain", PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 },
> { "drive-open-source", PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 },
> { "drive-push-pull", PIN_CONFIG_DRIVE_PUSH_PULL, 0 },
> @@ -172,6 +174,7 @@ static const struct pinconf_generic_params dt_params[] = {
> { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
> { "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 },
> { "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 },
> + { "output-enable", PIN_CONFIG_OUTPUT, 1, },
> { "output-high", PIN_CONFIG_OUTPUT, 1, },
> { "output-low", PIN_CONFIG_OUTPUT, 0, },
> { "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
> diff --git a/include/linux/pinctrl/pinconf-generic.h
> b/include/linux/pinctrl/pinconf-generic.h
> index 7620eb1..279e3c5 100644
> --- a/include/linux/pinctrl/pinconf-generic.h
> +++ b/include/linux/pinctrl/pinconf-generic.h
> @@ -42,6 +42,8 @@
> * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high
> * impedance to VDD). If the argument is != 0 pull-up is enabled,
> * if it is 0, pull-up is total, i.e. the pin is connected to VDD.
> + * @PIN_CONFIG_BIDIRECTIONAL: the pin will be configured to allow
> simultaneous
> + * input and output operations.
> * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open
> * collector) which means it is usually wired with other output ports
> * which are then pulled up with an external resistor. Setting this
> @@ -96,6 +98,7 @@ enum pin_config_param {
> PIN_CONFIG_BIAS_PULL_DOWN,
> PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
> PIN_CONFIG_BIAS_PULL_UP,
> + PIN_CONFIG_BIDIRECTIONAL,
> PIN_CONFIG_DRIVE_OPEN_DRAIN,
> PIN_CONFIG_DRIVE_OPEN_SOURCE,
> PIN_CONFIG_DRIVE_PUSH_PULL,
> --
> 2.7.4
>
--
With Best Regards,
Andy Shevchenko
