[PATCH v2 07/16] mmc: meson-gx: rework clk_set function

[Jerome Brunet]

Clean-up clk_set function to prepare the next changes (DDR and clk-stop)

Reviewed-by: Kevin Hilman <khil...@baylibre.com>
Signed-off-by: Jerome Brunet <jbru...@baylibre.com>
---
 drivers/mmc/host/meson-gx-mmc.c | 30 +++++++++---------------------
 1 file changed, 9 insertions(+), 21 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 18fff28025d8..8f9ba5190c18 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -139,7 +139,7 @@ struct meson_host {
        struct clk *core_clk;
        struct clk_mux mux;
        struct clk *mux_clk;
-       unsigned long current_clock;
+       unsigned long req_rate;
 
        struct clk_divider cfg_div;
        struct clk *cfg_div_clk;
@@ -275,29 +275,18 @@ static int meson_mmc_clk_set(struct meson_host *host, 
unsigned long clk_rate)
        int ret;
        u32 cfg;
 
-       if (clk_rate) {
-               if (WARN_ON(clk_rate > mmc->f_max))
-                       clk_rate = mmc->f_max;
-               else if (WARN_ON(clk_rate < mmc->f_min))
-                       clk_rate = mmc->f_min;
-       }
-
-       if (clk_rate == host->current_clock)
+       /* Same request - bail-out */
+       if (host->req_rate == clk_rate)
                return 0;
 
        /* stop clock */
        cfg = readl(host->regs + SD_EMMC_CFG);
-       if (!(cfg & CFG_STOP_CLOCK)) {
-               cfg |= CFG_STOP_CLOCK;
-               writel(cfg, host->regs + SD_EMMC_CFG);
-       }
-
-       dev_dbg(host->dev, "change clock rate %u -> %lu\n",
-               mmc->actual_clock, clk_rate);
+       cfg |= CFG_STOP_CLOCK;
+       writel(cfg, host->regs + SD_EMMC_CFG);
+       host->req_rate = 0;
 
        if (!clk_rate) {
                mmc->actual_clock = 0;
-               host->current_clock = 0;
                /* return with clock being stopped */
                return 0;
        }
@@ -309,13 +298,12 @@ static int meson_mmc_clk_set(struct meson_host *host, 
unsigned long clk_rate)
                return ret;
        }
 
+       host->req_rate = clk_rate;
        mmc->actual_clock = clk_get_rate(host->cfg_div_clk);
-       host->current_clock = clk_rate;
 
+       dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
        if (clk_rate != mmc->actual_clock)
-               dev_dbg(host->dev,
-                       "divider requested rate %lu != actual rate %u\n",
-                       clk_rate, mmc->actual_clock);
+               dev_dbg(host->dev, "requested rate was %lu\n", clk_rate);
 
        /* (re)start clock */
        cfg = readl(host->regs + SD_EMMC_CFG);
-- 
2.9.5