Use port isolation registers to configure bridge offloading.
Remove the VLAN init, as we have proper CPU tag and bridge offloading
support now.
Signed-off-by: DENG Qingfang <dqf...@gmail.com>
---
This is not tested, as I don't have a RTL8366RB board. And I think there
is potential race condition in port_bridge_{join,leave}.
drivers/net/dsa/rtl8366rb.c | 73 ++++++++++++++++++++++++++++++++++---
1 file changed, 67 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index a89093bc6c6a..9f6e2b361216 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -300,6 +300,12 @@
#define RTL8366RB_INTERRUPT_STATUS_REG 0x0442
#define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */
+/* Port isolation registers */
+#define RTL8366RB_PORT_ISO_BASE 0x0F08
+#define RTL8366RB_PORT_ISO(pnum) (RTL8366RB_PORT_ISO_BASE + (pnum))
+#define RTL8366RB_PORT_ISO_EN BIT(0)
+#define RTL8366RB_PORT_ISO_PORTS_MASK GENMASK(7, 1)
+
/* bits 0..5 enable force when cleared */
#define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11
@@ -835,6 +841,15 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
if (ret)
return ret;
+ /* Isolate user ports */
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(i),
+ RTL8366RB_PORT_ISO_EN |
+ BIT(RTL8366RB_PORT_NUM_CPU + 1));
+ if (ret)
+ return ret;
+ }
+
/* Set up the "green ethernet" feature */
ret = rtl8366rb_jam_table(rtl8366rb_green_jam,
ARRAY_SIZE(rtl8366rb_green_jam), smi, false);
@@ -963,10 +978,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
return ret;
}
- ret = rtl8366_init_vlan(smi);
- if (ret)
- return ret;
-
ret = rtl8366rb_setup_cascaded_irq(smi);
if (ret)
dev_info(smi->dev, "no interrupt support\n");
@@ -977,8 +988,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
return -ENODEV;
}
- ds->configure_vlan_while_not_filtering = false;
-
return 0;
}
@@ -1127,6 +1136,56 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port)
rb8366rb_set_port_led(smi, port, false);
}
+static int
+rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port,
+ struct net_device *bridge)
+{
+ struct realtek_smi *smi = ds->priv;
+ unsigned int port_bitmap = 0;
+ int ret, i;
+
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ if (i == port)
+ continue;
+ if (dsa_to_port(ds, i)->bridge_dev != bridge)
+ continue;
+ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+ 0, BIT(port + 1));
+ if (ret)
+ return ret;
+
+ port_bitmap |= BIT(i);
+ }
+
+ return regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+ 0, port_bitmap << 1);
+}
+
+static int
+rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct net_device *bridge)
+{
+ struct realtek_smi *smi = ds->priv;
+ unsigned int port_bitmap = 0;
+ int ret, i;
+
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ if (i == port)
+ continue;
+ if (dsa_to_port(ds, i)->bridge_dev != bridge)
+ continue;
+ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+ BIT(port + 1), 0);
+ if (ret)
+ return ret;
+
+ port_bitmap |= BIT(i);
+ }
+
+ return regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+ port_bitmap << 1, 0);
+}
+
static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
{
struct realtek_smi *smi = ds->priv;
@@ -1510,6 +1569,8 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops =
{
.get_strings = rtl8366_get_strings,
.get_ethtool_stats = rtl8366_get_ethtool_stats,
.get_sset_count = rtl8366_get_sset_count,
+ .port_bridge_join = rtl8366rb_port_bridge_join,
+ .port_bridge_leave = rtl8366rb_port_bridge_leave,
.port_vlan_filtering = rtl8366_vlan_filtering,
.port_vlan_add = rtl8366_vlan_add,
.port_vlan_del = rtl8366_vlan_del,
--
2.25.1
