From: Ping Cheng <pingli...@gmail.com>

commit 276559d8d02c2709281578976ca2f53bc62063d4 upstream.

Valid HID_GENERIC type of devices set EV_KEY and EV_ABS by wacom_map_usage.
When *_input_capabilities are reached, those devices should already have
their proper EV_* set. EV_KEY and EV_ABS only need to be set for
non-HID_GENERIC type of devices in *_input_capabilities.

Devices that don't support HID descitoprs will pass back to hid-input for
registration without being accidentally rejected by the introduction of
patch: "Input: refuse to register absolute devices without absinfo"

Fixes: 6ecfe51b4082 ("Input: refuse to register absolute devices without 
absinfo")
Signed-off-by: Ping Cheng <ping.ch...@wacom.com>
Reviewed-by: Jason Gerecke <jason.gere...@wacom.com>
Tested-by: Juan Garrido <juan.garr...@wacom.com>
CC: sta...@vger.kernel.org
Signed-off-by: Jiri Kosina <jkos...@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
 drivers/hid/wacom_wac.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -3574,8 +3574,6 @@ int wacom_setup_pen_input_capabilities(s
 {
        struct wacom_features *features = &wacom_wac->features;
 
-       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-
        if (!(features->device_type & WACOM_DEVICETYPE_PEN))
                return -ENODEV;
 
@@ -3590,6 +3588,7 @@ int wacom_setup_pen_input_capabilities(s
                return 0;
        }
 
+       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
        __set_bit(BTN_TOUCH, input_dev->keybit);
        __set_bit(ABS_MISC, input_dev->absbit);
 
@@ -3742,8 +3741,6 @@ int wacom_setup_touch_input_capabilities
 {
        struct wacom_features *features = &wacom_wac->features;
 
-       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-
        if (!(features->device_type & WACOM_DEVICETYPE_TOUCH))
                return -ENODEV;
 
@@ -3756,6 +3753,7 @@ int wacom_setup_touch_input_capabilities
                /* setup has already been done */
                return 0;
 
+       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
        __set_bit(BTN_TOUCH, input_dev->keybit);
 
        if (features->touch_max == 1) {


Reply via email to