Cc: Pawel, Kumar
On 08/16/2013 11:20 AM, Arun Kumar K wrote:
> From: Shaik Ameer Basha <[email protected]>
>
> This patch adds support for media device for EXYNOS5 SoCs.
> The current media device supports the following ips to connect
> through the media controller framework.
>
> * MIPI-CSIS
> Support interconnection(subdev interface) between devices
>
> * FIMC-LITE
> Support capture interface from device(Sensor, MIPI-CSIS) to memory
> Support interconnection(subdev interface) between devices
>
> * FIMC-IS
> Camera post-processing IP having multiple sub-nodes.
>
> G-Scaler will be added later to the current media device.
>
> The media device creates two kinds of pipelines for connecting
> the above mentioned IPs.
> The pipeline0 is uses Sensor, MIPI-CSIS and FIMC-LITE which captures
> image data and dumps to memory.
> Pipeline1 uses FIMC-IS components for doing post-processing
> operations on the captured image and give scaled YUV output.
>
> Pipeline0
> +--------+ +-----------+ +-----------+ +--------+
> | Sensor | --> | MIPI-CSIS | --> | FIMC-LITE | --> | Memory |
> +--------+ +-----------+ +-----------+ +--------+
>
> Pipeline1
> +--------+ +--------+ +-----------+ +-----------+
> | Memory | --> | ISP | --> | SCC | --> | SCP |
> +--------+ +--------+ +-----------+ +-----------+
>
> Signed-off-by: Shaik Ameer Basha <[email protected]>
> Signed-off-by: Arun Kumar K <[email protected]>
> ---
> .../devicetree/bindings/media/exynos5-mdev.txt | 126 ++
> drivers/media/platform/exynos5-is/exynos5-mdev.c | 1210
> ++++++++++++++++++++
> drivers/media/platform/exynos5-is/exynos5-mdev.h | 126 ++
> 3 files changed, 1462 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/exynos5-mdev.txt
> create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.c
> create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.h
>
> diff --git a/Documentation/devicetree/bindings/media/exynos5-mdev.txt
> b/Documentation/devicetree/bindings/media/exynos5-mdev.txt
> new file mode 100644
> index 0000000..b1299e2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/exynos5-mdev.txt
Sorry, I missed this previously. How about renaming this file to something
more specific to the subsystem it describes, e.g. exynos5250-camera.txt ?
> @@ -0,0 +1,126 @@
> +Samsung EXYNOS5 SoC Camera Subsystem
> +------------------------------------
> +
> +The Exynos5 SoC Camera subsystem comprises of multiple sub-devices
> +represented by separate device tree nodes. Currently this includes:
> FIMC-LITE,
> +MIPI CSIS and FIMC-IS.
> +
> +The sub-device nodes are referenced using phandles in the common 'camera'
> node
> +which also includes common properties of the whole subsystem not really
> +specific to any single sub-device, like common camera port pins or the common
> +camera bus clocks.
> +
> +Common 'camera' node
> +--------------------
> +
> +Required properties:
> +
> +- compatible : must be "samsung,exynos5250-fimc"
> +- clocks : list of clock specifiers, corresponding to entries in
> + the clock-names property;
> +- clock-names : must contain "sclk_bayer" entry
> +- samsung,csis : list of phandles to the mipi-csis device nodes
> +- samsung,fimc-lite : list of phandles to the fimc-lite device nodes
> +- samsung,fimc-is : phandle to the fimc-is device node
> +
> +The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
> +to define a required pinctrl state named "default".
> +
> +'parallel-ports' node
> +---------------------
> +
> +This node should contain child 'port' nodes specifying active parallel video
> +input ports. It includes camera A, camera B and RGB bay inputs.
> +'reg' property in the port nodes specifies the input type:
> + 1 - parallel camport A
> + 2 - parallel camport B
> + 5 - RGB camera bay
> +
> +3, 4 are for MIPI CSI-2 bus and are already described in
> samsung-mipi-csis.txt
> +
> +Image sensor nodes
> +------------------
> +
> +The sensor device nodes should be added to their control bus controller (e.g.
> +I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
> +using the common video interfaces bindings, defined in video-interfaces.txt.
> +
> +Example:
> +
> + aliases {
> + fimc-lite0 = &fimc_lite_0
> + };
> +
> + /* Parallel bus IF sensor */
> + i2c_0: i2c@13860000 {
> + s5k6aa: sensor@3c {
> + compatible = "samsung,s5k6aafx";
> + reg = <0x3c>;
> + vddio-supply = <...>;
> +
> + clock-frequency = <24000000>;
> + clocks = <...>;
> + clock-names = "mclk";
> +
> + port {
> + s5k6aa_ep: endpoint {
> + remote-endpoint = <&fimc0_ep>;
> + bus-width = <8>;
> + hsync-active = <0>;
> + vsync-active = <1>;
> + pclk-sample = <1>;
> + };
> + };
> + };
> + };
> +
> + /* MIPI CSI-2 bus IF sensor */
> + s5c73m3: sensor@1a {
> + compatible = "samsung,s5c73m3";
> + reg = <0x1a>;
> + vddio-supply = <...>;
> +
> + clock-frequency = <24000000>;
> + clocks = <...>;
> + clock-names = "mclk";
> +
> + port {
> + s5c73m3_1: endpoint {
> + data-lanes = <1 2 3 4>;
> + remote-endpoint = <&csis0_ep>;
> + };
> + };
> + };
> +
> + camera {
> + compatible = "samsung,exynos5250-fimc";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&cam_port_a_clk_active>;
> +
> + samsung,csis = <&csis_0>, <&csis_1>;
> + samsung,fimc-lite = <&fimc_lite_0>, <&fimc_lite_1>,
> <&fimc_lite_2>;
> + samsung,fimc-is = <&fimc_is>;
> +
> + /* parallel camera ports */
> + parallel-ports {
> + /* camera A input */
> + port@0 {
This should be port@1
> + reg = <0>;
and reg = <1>;
> + camport_a_ep: endpoint {
> + remote-endpoint = <&s5k6aa_ep>;
> + bus-width = <8>;
> + hsync-active = <0>;
> + vsync-active = <1>;
> + pclk-sample = <1>;
> + };
> + };
> + };
> + };
> +
> +MIPI-CSIS device binding is defined in samsung-mipi-csis.txt, FIMC-LITE
> +device binding is defined in exynos-fimc-lite.txt and FIMC-IS binding
> +is defined in exynos5-fimc-is.txt.
Otherwise looks good to me. I think we now need an Ack from the DT
maintainers. If they are OK with the binding I could queue this whole
series for v3.12 this week, once you resend patches #1, #2.
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
