> On Thu, Jun 2, 2011 at 11:39 AM, Bing Zhao <bz...@marvell.com> wrote: >>> If we power down the sd8686, and power it up again, without toggling >>> the reset pin at all (e.g. keep it always high), will the card work ? >> >> Yes. The card should work without toggling the reset pin. > > Thanks. > > Just for closure-sake, can you please confirm that the sd8686 requires > sending a CMD5 arg=0 as part of the initialization sequence after > powering it on ?
"CMD5 Arg=0" refers to the very first CMD5 sent from host during initialization sequence. This is required because our state machine always expects two CMD5 from host (5, 5, 3, 7, ...). Regards, Bing > (we'd probably add it anyway, but it'd be nice to get a confirmation > about this from you guys) > > Btw, it will be nice to allow cards to avoid sending this if not > required; a simple card quirk will do. wl12xx will definitely use such > a quirk.-- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
