On Fri, Jun 10, 2011 at 12:28 PM, Ohad Ben-Cohen <o...@wizery.com> wrote: > Hi Zhangfei, > > On Fri, Jun 10, 2011 at 5:02 AM, zhangfei gao <zhangfei....@gmail.com> wrote: >> Here is answer got from the sd8686 maintainer. >> >> For 8686, the SDIO state machine can only handle init sequence (CMD5, >> 5, 3, 7) from host once. If host sends another init sequence, it will >> not be able to handle CMD5 and causes the SDIO block to hang. Chips >> that are newer than 8686 will be able to handle multiple init sequence >> from host. > > Thanks for the reply ! > >> So yes, for 8686, an IO reset is needed before host can send a new set >> of init sequence. > > But if we're powering down and up the device first, then the init > sequence is considered the first one, and then we don't need an IO > reset, right ? That was what we wondered about.
Hi Ohad, If you power down and up the device, then IO reset is not needed and 8686 can process host init sequence correctly. CC Benson. > > Thanks, > Ohad. > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
