On Thu, 2010-09-23 at 12:30 +0200, ext Grazvydas Ignotas wrote:
> On Thu, Sep 23, 2010 at 11:20 AM, Luciano Coelho
> <luciano.coe...@nokia.com> wrote:
> > Add board configuration for the wl1271 daughter board. This patch is based
> > on Ohad Ben-Cohen's patches for Zoom boards.
>
> Hm can that daughter board be detected? With your patch all beagle
> users will get GPIO139 toggled, and if someone has that wired to
> chainsaw switch somebody might get hurt.
Very good point. This was just me, working on my chainsaw-free bubble,
who didn't realize the danger of the code! :)
But actually I have no idea how to detect what kind of daughter board is
connected. Hopefully there is generic way of doing this in beagle
boards. Otherwise the only way I can think of is to add a Kconfig
option for this... :/
> > Cc: Ohad Ben-Cohen <o...@wizery.com>
> > Signed-off-by: Luciano Coelho <luciano.coe...@nokia.com>
> > ---
> > There was a useless variable defined in omap3_beagle_init() that was
> > causing a
> > warning. I have removed it in v2.
> >
> > arch/arm/mach-omap2/board-omap3beagle.c | 69
> > +++++++++++++++++++++++++++++++
> > drivers/net/wireless/wl12xx/wl1271.h | 2 +-
> > 2 files changed, 70 insertions(+), 1 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
> > b/arch/arm/mach-omap2/board-omap3beagle.c
> > index 87969c7..755df29 100644
> > --- a/arch/arm/mach-omap2/board-omap3beagle.c
> > +++ b/arch/arm/mach-omap2/board-omap3beagle.c
>
> <snip>
>
> > +static struct regulator_consumer_supply beagle_vmmc2_supply = {
> > + .supply = "vmmc",
> > + .dev_name = "mmci-omap-hs.1",
> > +};
> > +
> > +
>
> single newline is enough.
I'll fix it.
> > static struct regulator_consumer_supply beagle_vsim_supply = {
> > .supply = "vmmc_aux",
> > };
> >
> > +
>
> here too.
Here too.
> > +static struct regulator_init_data beagle_vmmc2 = {
> > + .constraints = {
> > + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> > + },
> > + .num_consumer_supplies = 1,
> > + .consumer_supplies = &beagle_vmmc2_supply,
> > +};
> > +
> > +static struct fixed_voltage_config beagle_vwlan = {
> > + .supply_name = "vwl1271",
> > + .microvolts = 1800000, /* 1.8V */
> > + .gpio = OMAP_BEAGLE_WLAN_EN_GPIO,
> > + .startup_delay = 70000, /* 70ms */
> > + .enable_high = 1,
> > + .enabled_at_boot = 0,
> > + .init_data = &beagle_vmmc2,
> > +};
>
> We tabify all structures in board files, take a look at other structures.
Sure, I'll do that. I just copied this from a previous patch to which
someone commented the same thing. I just forgot to fix it before
submitting, because I got so excited when it worked :)
> > diff --git a/drivers/net/wireless/wl12xx/wl1271.h
> > b/drivers/net/wireless/wl12xx/wl1271.h
> > index 4134f44..8bb028e 100644
> > --- a/drivers/net/wireless/wl12xx/wl1271.h
> > +++ b/drivers/net/wireless/wl12xx/wl1271.h
> > @@ -60,7 +60,7 @@ enum {
> > DEBUG_ALL = ~0,
> > };
> >
> > -#define DEBUG_LEVEL (DEBUG_NONE)
> > +#define DEBUG_LEVEL (DEBUG_MAC80211 | DEBUG_CMD | DEBUG_ACX | DEBUG_BOOT)
>
> I guess you didn't want that?
No, I certainly didn't. I have already sent a v3 without that.
--
Cheers,
Luca.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
