On Thu, Sep 23, 2010 at 5:30 AM, Grazvydas Ignotas <nota...@gmail.com> wrote: > On Thu, Sep 23, 2010 at 11:20 AM, Luciano Coelho > <luciano.coe...@nokia.com> wrote: >> Add board configuration for the wl1271 daughter board. This patch is based >> on Ohad Ben-Cohen's patches for Zoom boards. > > Hm can that daughter board be detected? With your patch all beagle > users will get GPIO139 toggled, and if someone has that wired to > chainsaw switch somebody might get hurt.
Expansion boards really need to follow: http://elinux.org/BeagleBoardPinMux#Expansion_boards Is there any eeprom on i2c bus #2 for identification on this board? Otherwise this is going to break a bunch of existing adapters. Regards, > >> Cc: Ohad Ben-Cohen <o...@wizery.com> >> Signed-off-by: Luciano Coelho <luciano.coe...@nokia.com> >> --- >> There was a useless variable defined in omap3_beagle_init() that was causing >> a >> warning. I have removed it in v2. >> >> arch/arm/mach-omap2/board-omap3beagle.c | 69 >> +++++++++++++++++++++++++++++++ >> drivers/net/wireless/wl12xx/wl1271.h | 2 +- >> 2 files changed, 70 insertions(+), 1 deletions(-) >> >> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c >> b/arch/arm/mach-omap2/board-omap3beagle.c >> index 87969c7..755df29 100644 >> --- a/arch/arm/mach-omap2/board-omap3beagle.c >> +++ b/arch/arm/mach-omap2/board-omap3beagle.c > > <snip> > >> +static struct regulator_consumer_supply beagle_vmmc2_supply = { >> + .supply = "vmmc", >> + .dev_name = "mmci-omap-hs.1", >> +}; >> + >> + > > single newline is enough. > >> static struct regulator_consumer_supply beagle_vsim_supply = { >> .supply = "vmmc_aux", >> }; >> >> + > > here too. > >> +static struct regulator_init_data beagle_vmmc2 = { >> + .constraints = { >> + .valid_ops_mask = REGULATOR_CHANGE_STATUS, >> + }, >> + .num_consumer_supplies = 1, >> + .consumer_supplies = &beagle_vmmc2_supply, >> +}; >> + >> +static struct fixed_voltage_config beagle_vwlan = { >> + .supply_name = "vwl1271", >> + .microvolts = 1800000, /* 1.8V */ >> + .gpio = OMAP_BEAGLE_WLAN_EN_GPIO, >> + .startup_delay = 70000, /* 70ms */ >> + .enable_high = 1, >> + .enabled_at_boot = 0, >> + .init_data = &beagle_vmmc2, >> +}; > > We tabify all structures in board files, take a look at other structures. > > <snip> > >> diff --git a/drivers/net/wireless/wl12xx/wl1271.h >> b/drivers/net/wireless/wl12xx/wl1271.h >> index 4134f44..8bb028e 100644 >> --- a/drivers/net/wireless/wl12xx/wl1271.h >> +++ b/drivers/net/wireless/wl12xx/wl1271.h >> @@ -60,7 +60,7 @@ enum { >> DEBUG_ALL = ~0, >> }; >> >> -#define DEBUG_LEVEL (DEBUG_NONE) >> +#define DEBUG_LEVEL (DEBUG_MAC80211 | DEBUG_CMD | DEBUG_ACX | DEBUG_BOOT) > > I guess you didn't want that? > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Robert Nelson http://www.rcn-ee.com/ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
