I thought I'd have another go at possibly getting an answer to this
question. I'm currently running Redhat 7.3, with the stock redhat
2.4.20-18 kernel (installed via RPM). I have a Lacie External CD-R
enclosure that I'm connecting to my USB port. When I power on the
drive, the USB portion springs into action, identifying it and adding an
entry to /proc/scsi/usb-storage-0:
Host scsi1: usb-storage
Vendor: LaCie
Product: USB Mass STORAGE
Serial Number: None
Protocol: 8020i
Transport: Control/Bulk
GUID: 059fa6020000000000000000
Attached: Yes
However, that's it. /proc/scsi/scsi does not contain an entry for this
drive (it only contains an entry for my tape drive which is an atapi
tape drive added to the scsi system via ide-scsi and the hdd=scsi kernel
parameter)
My module list:
sg 33028 0 (autoclean)
sr_mod 16088 0 (unused)
usb-storage 64960 0
st 29488 0 (autoclean)
snd-seq-oss 29152 0 (autoclean)
snd-seq-midi-event 5468 0 (autoclean) [snd-seq-oss]
snd-seq 46092 2 (autoclean) [snd-seq-oss
snd-seq-midi-event]
snd-pcm-oss 43140 1 (autoclean)
snd-mixer-oss 14496 1 (autoclean) [snd-pcm-oss]
agpgart 43520 3 (autoclean)
nvidia 1674080 10 (autoclean)
parport_pc 16804 1 (autoclean)
lp 8768 0 (autoclean)
parport 33216 1 (autoclean) [parport_pc lp]
appletalk 23020 12 (autoclean)
snd-intel8x0 20864 2
snd-pcm 79392 0 [snd-pcm-oss snd-intel8x0]
snd-timer 19072 0 [snd-seq snd-pcm]
snd-ac97-codec 47376 0 [snd-intel8x0]
snd-mpu401-uart 4584 0 [snd-intel8x0]
snd-rawmidi 17216 0 [snd-mpu401-uart]
snd-seq-device 5740 0 [snd-seq-oss snd-seq snd-rawmidi]
snd 40064 0 [snd-seq-oss snd-seq-midi-event
snd-seq snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer
snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 6212 5 [snd]
snd-page-alloc 7488 0 [snd-intel8x0 snd-pcm]
eepro100 21068 1
mii 3816 0 [eepro100]
iptable_mangle 2912 0 (autoclean) (unused)
iptable_nat 20436 0 (autoclean) (unused)
ip_conntrack 24948 1 (autoclean) [iptable_nat]
iptable_filter 2432 1 (autoclean)
ip_tables 13376 5 [iptable_mangle iptable_nat
iptable_filter]
ide-scsi 10528 0
scsi_mod 103756 5 [sg sr_mod usb-storage st ide-scsi]
ide-cd 31616 0
cdrom 33248 0 [sr_mod ide-cd]
nls_iso8859-1 3456 1 (autoclean)
nls_cp437 5088 1 (autoclean)
vfat 11484 1 (autoclean)
fat 35992 0 (autoclean) [vfat]
usb-uhci 23620 0 (unused)
usbcore 71680 1 [usb-storage usb-uhci]
ext3 64000 2
jbd 45836 2 [ext3]
Note that usb-storage was started automatically, but sr_mod was added
by hand (via modprobe) in an effort to make it "see" the CD-R. Is there
some step I'm missing? Some module that needs to be loaded? Any help
would be appreciated.....
--
-----------------------------------------------------------------
Aaron Smith vox: 269.226.9550 ext.26
Network Director fax: 269.349.9076
Nexcerpt, Inc. http://www.nexcerpt.com
...Nexcerpt... Extend Your Expertise
signature.asc
Description: This is a digitally signed message part
