From Michael Niehaus: ----- I’ve duplicated the issue – it only happens when you specify SkipProductKey=NO in CustomSettings.ini. To fix the issue, either change CustomSettings.ini to specify SkipProductKey=YES or make a simple script change. The script in question in DeployWiz_ProductKeyVista.vbs. Find this line:
if oProperties("DeploymentType") = "UPGRADE" then And change it to: If Property("DeploymentType") = "UPGRADE" then I’ve filed a bug for this. Thanks, -Michael From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of Jonas Pettersson Sent: Wednesday, November 30, 2016 8:25 AM To: mdtosd@lists.myitforum.com Subject: SV: [MDT-OSD] MDT 8443: Invalid DeploymentType value "" specified. The deployment will not proceed. Hi, I also get this error, same scenario where I upgraded from a working MDT 2013 Update 2. I have two deployment shares on this server that was upgraded (both Image Factory and Production) and the Image Factory still works ok. There are some differences between these two: Production uses the database Production uses Monitoring It does not matter if I add the new virtual machine I’m trying to install to the database or not. Property DeploymentType is set to NEWCOMPUTER in the BDD log all the way (4 times) until the part where the wizard imput is, after that is is empty. Regards, Jonas Från: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] För explanoit Skickat: den 16 november 2016 19:04 Till: mdtosd@lists.myitforum.com<mailto:mdtosd@lists.myitforum.com> Ämne: Re: [MDT-OSD] MDT 8443: Invalid DeploymentType value "" specified. The deployment will not proceed. Hello, Someone from Microsoft reached out to me and I sent them all my MDT logs and configurations. They said there’s something in the wizard that is setting the DeploymentType back to blank. However, I have not done any wizard customizations and even tried manually setting the DeploymentType in the task sequence. Still trying to understand what’s happening. Regards, explanoit On Wed, Nov 16, 2016 at 3:37 AM, Keith Garner <keith.gar...@hotmail.com<mailto:keith.gar...@hotmail.com>> wrote: I encountered this error several weeks ago on MDT 8443, and could not pin down how it was happening. If you can get a repro and find out how this is happening, please let me know directly. Thanks! From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>] On Behalf Of CESAR.ABREG0 . Sent: Tuesday, November 15, 2016 2:17 AM To: mdtosd@lists.myitforum.com<mailto:mdtosd@lists.myitforum.com> Subject: Re: [MDT-OSD] MDT 8443: Invalid DeploymentType value "" specified. The deployment will not proceed. What does the bdd.log says? On Mon, Nov 14, 2016, 2:32 PM explanoit <explan...@gmail.com<mailto:explan...@gmail.com>> wrote: Hello everyone! I posted the following on the MDT forum, do you have any ideas for what I could try? https://social.technet.microsoft.com/Forums/en-US/8c74127b-0857-4f3a-b23b-35fa4cfcaa73/mdt-8443-invalid-deploymenttype-value-specified-the-deployment-will-not-proceed?forum=mdt MDT 8443: Invalid DeploymentType value "" specified. The deployment will not proceed. I previously had MDT 2013 Update 2 installed, and upgraded to MDT 8443. I'm using ADK Win10 1607 with Windows 10 as the file server. This has been working for over a year now. I upgraded the MDT software and updated my deployment share and litetouch WIM. I deployed my litetouch WIM to our WDS and booted off it. Now, no matter what Task Sequence I select, after the "Ready to begin" screen, I get the following error: Deployment Error "Invalid DeploymentType value "" specified. The deployment will not proceed." [OK] I've tried every Task Sequence, I even built a new Task Sequence, I get the same issue. I've tried manually specifying the "DeploymentType" various in both my bootstrap and in the Task Sequence itself, with no improvement. ==RULES== [Settings] Priority=Default Properties=MyCustomProperty [Default] SkipBDDWelcome=YES OSInstall=Y SkipCapture=YES SkipAdminPassword=YES SkipDomainMembership=NO JoinDomain=domain.com<http://domain.com> EventService=http://computer:9800 ==BOOTSTRAP.INI== [Settings] Priority=Default [Default] _SMSTSOrgName=Running %TaskSequenceID% on %OSDComputername% SkipBDDWelcome=YES DeployRoot=\\computer\DeploymentShare OSDComputerName=DAL-%SerialNumber% SkipDomainMembership=NO JoinDomain=domain.com<http://domain.com> UserDomain=domain.com<http://domain.com> SkipLocaleSelection=YES UILanguage=en-US UserLocale=en-US KeyboardLocale=en-US HideShell=YES FinishAction=REBOOT SkipTimeZone=YES SkipLocaleSelection=YES TimeZoneName=Central Standard Time SkipFinalSummary=YES ====== I appreciate any ideas you have. Thank you!