Hi,
The dmesg Output Shows
Clean: Yes
for both Raid Components as shown below
============================================================
raid0: Component /dev/wd0d being configured at row: 0 col: 0
Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 200612010 Mod Counter: 820
Clean: Yes Status: 0
raid0: Component /dev/wd1d being configured at row: 0 col: 1
Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 200612010 Mod Counter: 820
Clean: Yes Status: 0
raid0 (root)
=================================================================
but raidctl shows
Clean: No
as shown below
Could Some one tell me why this is so?
it is the same state even after reboots.
Which one should i beleive?
Is the Raid not working properly?
=================================================================
# raidctl -sv raid0
raid0 Components:
/dev/wd0d: optimal
/dev/wd1d: optimal
No spares.
Component label for /dev/wd0d:
Row: 0, Column: 0, Num Rows: 1, Num Columns: 2
Version: 2, Serial Number: 200612010, Mod Counter: 825
Clean: No, Status: 0
sectPerSU: 128, SUsPerPU: 1, SUsPerRU: 1
Queue size: 100, blocksize: 512, numBlocks: 231085824
RAID Level: 1
Autoconfig: Yes
Root partition: Yes
Last configured as: raid0
Component label for /dev/wd1d:
Row: 0, Column: 1, Num Rows: 1, Num Columns: 2
Version: 2, Serial Number: 200612010, Mod Counter: 825
Clean: No, Status: 0
sectPerSU: 128, SUsPerPU: 1, SUsPerRU: 1
Queue size: 100, blocksize: 512, numBlocks: 231085824
RAID Level: 1
Autoconfig: Yes
Root partition: Yes
Last configured as: raid0
Parity status: clean
Reconstruction is 100% complete.
Parity Re-write is 100% complete.
Copyback is 100% complete.
#
=============================================================
Thankyou so much :-)
Kind Regards
Siju
For the full dmesg
==============================================================
# dmesg
OpenBSD 4.0 (GENERIC.RAID2) #0: Fri Nov 24 20:28:14 IST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.RAI
D2
real mem = 1039593472 (1015228K)
avail mem = 878211072 (857628K)
using 22937 buffers containing 104165376 bytes (101724K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfc650 (54 entries)
bios0: Acer Aspire Series
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3400+, 2193.90 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 1
6-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 17 function 0 "ATI IXP400 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <ST3120827AS>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 1: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 1 drive 0: <ST3120827AS>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
pciide1 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x80: DMA
pciide1: using irq 5 for native-PCI interrupt
ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x80: irq 4, version 1.0, l
egacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x80: irq 4, version 1.0, l
egacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x80: irq 4
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
piixpm0 at pci0 dev 20 function 0 "ATI IXP400 SMBus" rev 0x81: SMI
iic0 at piixpm0
"unknown" at iic0 addr 0x2f not configured
pciide2 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x80: DMA, channel 0 conf
igured to compatibility, channel 1 configured to compatibility
azalia0 at pci0 dev 20 function 2 "ATI IXP450 HD Audio" rev 0x01: irq 5
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Realtek ALC880 (rev. 8.0), HDA version 1.0
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x80
ppb1 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x80
pci2 at ppb1 bus 2
re0 at pci2 dev 3 function 0 "Realtek 8169" rev 0x10: irq 5, address 00:16:17:20
:2a:a6
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
Kernelized RAIDframe activated
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
raid0: Component /dev/wd0d being configured at row: 0 col: 0
Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 200612010 Mod Counter: 820
Clean: Yes Status: 0
raid0: Component /dev/wd1d being configured at row: 0 col: 1
Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 200612010 Mod Counter: 820
Clean: Yes Status: 0
raid0 (root)
================================================================
