Hello All, I have a project that build fine with the 'old' mspgcc (4.7.0). I managed to get it build and linked with the new toolkit. At first the code did not fit, where it did before.
I disabled some features in the source tree and now I can build with both GCC versions (4.7.0 vs 4.9.1). However the difference in code size is significant, se the following comparison: mspgcc 4.7.0 .text sizes Main.o 0x184 Timers.o 0x226 Subroutine.o 0x21e Eerom.o 0x51c Modbusmaster.o 0x1fa Hartserial.o 0x422 Hartprocess.o 0x8ae Hartunivers.o 0xa60 Hartcompractice.o 0x1a52 Hartransmspec.o 0xbfe Hartmain.o 0x81a Harttimers.o 0xb4 Sensors.o 0x2ee Modbuserial.o 0x11e Hartconversion.o 0x348 Hartplatformdep.o 0x2d0 libs 0xe4c etext=0x9664 mspgcc 4.9.1 .text sizes Main.o 0x1f4 Timers.o 0x27e Subroutine.o 0x30a Eerom.o 0x68a Modbusmaster.o 0x22a Hartserial.o 0x436 Hartprocess.o 0xc5c Hartunivers.o 0xb30 Hartcompractice.o 0x1c98 Hartransmspec.o 0xdda Hartmain.o 0xa24 Harttimers.o 0xc0 Sensors.o 0x452 Modbuserial.o 0x142 Hartconversion.o 0x3dc Hartplatformdep.o 0x32c libs 0x306c etext= 0xc906 I hope someone can use these numbers. I compiled with the same CCFLAGS, optimizing etc. best regards Kees ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
