Re: MSR-2000 Alignment Metering > Probably looks a lot like the one at the top of the web page > at <http://www.repeater-builder.com/msr2000/msr2000-index.html>
There's an error on the above mentioned web page. > "In other words, YOU CANNOT USE A MODERN DVM TO PROPERLY > TUNE AN MSR2000." I don't agree, in fact it's much easier for me to use my Fluke DMM to detect some of the very small meter peaks and dips. There is no rule or requirement the metering points have to be loaded by a 50uA movement. Erratic metering with low cost Digital Multi Meters is probably the result of the price you paid. "If it's a good meter, it must be a Fluke". cheers, s.