Bug#607766: Fresh install of Squeeze on Thinkpad Edge 11; wireless network problems and grub oddity
reassign 607766 netcfg retitle 607766 Fails to configure WEP wireless network without DHCP thanks Quoting Ian Wakeling (ian.wakel...@ntlworld.com): First, it failed to find any accesspoints. My accesspoint doesn't broadcast, so I didn't expect it to find that, but my neighbours are all noisy, so it should have found those and it didn't. No matter, it offered me the option of entering the essid manually, which was fine and it then went on to ask me for the WEP key, also good. It said it was trying to configure with DHCP, which I don't have enabled, so I waited for that to fail and then configured it manually. No error messages at this point, everything looked fine. Then it failed to retrieve anything from the mirrors. Looking at the log on console 4, it claimed it had authorised with the access point, but going to console 2 and looking at ip link said the interface was down and I couldn't get it to come up. The ethernet configuration looked OK, but the lack of wireless tools meant I couldn't check the wireless configuration. That seems to be a bug that could be investigated in netcfg: WEP+manual network failing. There may be some timeout quirks somewhere. Although GRUB identified the two Windows partitions, they didn't appear in the boot options on initial reboot. Running update-grub later on fixed it. Should be fixed when the last versions of grub-installer migrate to testing, as far as I've followed these stories. The only other minor gripe was that the task selection interface offers Graphical Desktop and not having done a fresh install for quite a while, I naïvely selected it, expecting to be offered the choice of which desktop... but it went ahead and installed Gnome, which I did not want! I have absolutely no interest in a debate about the relative merits of the various desktops, but if the installer really can't offer the choice of desktops, the option should at least be labelled Gnome so that it's clear what is being offered and those who want something else can avoid wasting lots of time and bandwidth. Otherwise, it all went smoothly and everything worked - well done, thanks! This is a FAQ for D-I. There are tons of reasons for which we don't want to prompt users for the kind of graphical environment they want to use. GNOME being the default environment for Debian, it is logical that Graphical desktop brings GNOME in without an extra annoying question. Alternative GUI environment can be chosen through a boot command line option (see installation guide for details). I reassign this bug report to netcfg for the WEP issue. Many thanks for your report and the good details and explanations it contains. signature.asc Description: Digital signature
Bug#607786: xfce4: screensaver not automatically started on logon/reboot and no way to make it so
Package: xfce4 Version: 4.6.2 Severity: normal With a fresh install of XFCE via via the testing Debian installer (i.e. Squeeze install, desktop=xfce, 2010-12-21), the screensaver is not started automatically on login, nor on reboot. It does start after you have used Settings|Screensaver IFF you say restart daemon at the prompt, but on reboot it fails to restart when you login. This is because there is no autostart .desktop anywhere for xscreensaver. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xfce4 depends on: ii gtk2-engines-xfce 2.6.0-2A GTK+-2.0 theme engine for Xfce ii orage 4.6.1-1+b1 Calendar for Xfce Desktop Environm ii thunar1.0.2-1+b2 File Manager for Xfce ii thunar-volman 0.3.80-4 Thunar extension for volumes manag ii xfce4-appfinder 4.6.2-1Application finder for the Xfce4 D ii xfce4-mixer 4.6.1-2+b1 Xfce mixer application ii xfce4-panel 4.6.4-1The Xfce4 desktop environment pane ii xfce4-session 4.6.2-3Xfce4 Session Manager ii xfce4-settings4.6.5-2graphical application for managing ii xfce4-utils 4.6.2-1Various tools for Xfce ii xfconf4.6.2-1utilities for managing settings in ii xfdesktop44.6.2-1+b1 xfce desktop background, icons and ii xfwm4 4.6.2-1window manager of the Xfce project Versions of packages xfce4 recommends: ii desktop-base 6.0.2 common files for the Debian Deskto ii tango-icon-theme 0.8.90-3 Tango icon theme ii xorg 1:7.5+8X.Org X Window System Versions of packages xfce4 suggests: ii xfce4-goodies 4.6.1.1enhancements for the Xfce4 Desktop ii xfprint4 4.6.1-1Printer GUI for Xfce4 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#516540: please adopt general naming schema
also, while you are at it, please also change the source package name from the artificial 'libapache-mod-security' to it's upstream name: modsecurity. Regards, Daniel -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: daniel.baum...@progress-technologies.net Internet: http://people.progress-technologies.net/~daniel.baumann/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607787: partman-basicfilesystems: debconf template Slovenian translation
Package: partman-basicfilesystems Severity: wishlist Tags: patch l10n *** Please type your report below this line *** -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/6 CPU cores) Locale: LANG=sl_SI.UTF-8, LC_CTYPE=sl_SI.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash partman-basicfilesystems_68_sl.po.gz Description: application/gzip
Bug#607788: partman-btrfs: debconf template Slovenian translation
Package: partman-btrfs Severity: wishlist Tags: d-i patch l10n *** Please type your report below this line *** -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/6 CPU cores) Locale: LANG=sl_SI.UTF-8, LC_CTYPE=sl_SI.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash partman-btrfs_4_sl.po.gz Description: application/gzip
Bug#607767: Blank screen on starting X with Dual 2 GHz G5 and X800XT; DRM module not loading for radeon driver
On Die, 2010-12-21 at 17:42 -0500, dpickett wrote: Package: X11-common Version: 1:7.3+20 Error message from Xorg.0.log: (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM Are there any hints in the dmesg output as to why the radeon kernel module fails to load / initialize? If not, what happens if you try to modprobe radeon manually? To reproduce this bug, I have to boot into X on my machine. Machine goes through normal start up procedures, starts X and presents a completely blank screen. Computer is an Apple PowerMac, dual 2 GHz G5, with an ATi Radeon X800XT installed. Kernal is Linux 2.6.26-2-powerpc64. [...] (EE) RADEON(0): FIFO timed out, resetting engine... The X server is hanging because the GPU locked up. -- Earthling Michel Dänzer |http://www.vmware.com Libre software enthusiast | Debian, X and DRI developer -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607789: python-forgethtml: description contains odd wording
Package: python-forgethtml Version: 0.0.20031008-9 Severity: minor Hi, The description states this: different classes, one pr. HTML element. Is this intended as shorthand for 'one per HTML element.'? At the moment it implies the HTML is a professor :) kk -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686-bigmem (SMP w/2 CPU cores) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607756: xserver-xorg-video-ati: Resolution 1152x768 does not work on Rage Mobility M3 AGP 2x (rev 02)
On Die, 2010-12-21 at 20:16 +0100, Jeroen Diederen wrote: Package: xserver-xorg-video-ati Version: 1:6.13.1-2+squeeze1 Severity: normal I tried to get X working with the native resolution 1152x768 on this PowerBook G4 Titanium 500 MHz with an ATI Rage Mobility M3 AGP 2x (rev 02) video card. I tried to add the modeline for 1152x768 at different frequencies in the monitor section to no avail. [...] Section Monitor Identifier Standardbildschirm Option DPMS HorizSync 30-100 VertRefresh 50-160 # 1152x768 59.78 Hz (CVT) hsync: 47.71 kHz; pclk: 71.75 MHz #Modeline 1152x768_60.00 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync #Option PreferredMode 1152x768_60.00 EndSection Section Screen Identifier Default Screen Device ATI Technologies, Inc. Rage Mobility M3 (AGP) Monitor Standardbildschirm DefaultDepth24 SubSection Display Depth 1 Modes 1152x768 896x600 720x480 EndSubSection SubSection Display Depth 4 Modes 1152x768 896x600 720x480 EndSubSection SubSection Display Depth 8 Modes 1152x768 896x600 720x480 EndSubSection SubSection Display Depth 15 Modes 1152x768 896x600 720x480 EndSubSection SubSection Display Depth 16 Modes 1152x768 896x600 720x480 EndSubSection SubSection Display Depth 24 Modes 1152x768 896x600 720x480 EndSubSection EndSection At the very least, you'd need to reference the 1152x768 mode you define by its actual name... -- Earthling Michel Dänzer |http://www.vmware.com Libre software enthusiast | Debian, X and DRI developer -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#605065: Bug#607662: Bug#605065: Bug#607662: ncurses-base: backspace key deletes forwards on the kFreeBSD console
On 2010-12-22 08:41 +0100, Petr Salinger wrote: It seems that current plain FreeBSD kernel generates events that fully corresponds to cons25 entry. It just uses different definitions for kbs and kdch1 wrt Linux, Linux: kbs=\177 kdch1=\E[3~ FreeBSD/cons25s kbs=^H kdch1=\177 The problem might be incorect stty erase setting, programs that do not honor these settings or some workarounds in programs. Emacs, for instance, does not expect ^H to mean delete previous character by default. Instead it invokes the online help, which is annoying to no end. While this can be changed in .emacs, the backspace key not working out of the box is still a serious problem IMO. It seems that upstream FreeBSD plans to switch their $TERM into xterm, via TEKEN_XTERM. Actually the switch to xterm has happened already, more than one year ago: http://svn.freebsd.org/viewvc/base?view=revisionrevision=199250. Note that Debian uses kbs=\177 in the xterm terminfo entry, while xterm upstream has kbs=^H. Cheers, Sven -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#606212: Fixing SBOX
On 22.12.2010 06:52, Thomas Goirand wrote: Hi Matthias, Thanks for sending this report. I don't mind applying this (trivial) patch, but I'd like to understand. http://wiki.debian.org/ToolChain/DSOLinking shows a list of proposed changes for wheezy. Why is it that putting $(LIBS) at the end of the $(CC) call fixes something? What is --as-needed for, and why it does a build failure? Do you think this is needed to be fixed in Squeeze too? the package will fail to build with every linker which assumes traditional behaviour in that the order of objects on the command is wanted. symbols have to be refered to, before they get resolved. Matthias -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607604: linux-image-2.6.32-5-openvz-amd64: nfsd oops after 'exportfs -ra'
On 21/12/10 17:19, Ola Lundqvist wrote: Thanks for your report. Could you try this with an unpatched kernel as this could be due to that the IPv6 actually works now. Hi Ola, Yes I tested this just now to make sure it wasn't related to the patch. I've reproduced the oops with the official build of 2.6.32-5-openvz-amd64 2.6.32-29. After booting, I did the usual 'mount --bind' onto /var/lib/tftpboot on the nfs server and ran 'exportfs -ra'. A system running a squeeze Debian Live image successfully boots pxelinux via TFTP from that directory, but then it tries to mount its nfs root filesystem there and triggers the oops. At some point I'll change the nfs mount so I don't have to use the 'mount --bind', to try to isolate that as the cause, or in case it's something else triggering it. New oops follows. Thanks. [0.00] Linux version 2.6.32-5-openvz-amd64 (Debian 2.6.32-29) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Dec 10 16:18:03 UTC 2010 [ 479.636753] Oops: [#1] SMP [ 479.636753] last sysfs file: /sys/devices/pci:00/:00:19.3/temp3_input [ 479.636753] CPU 3 [ 479.636753] Modules linked in: vzethdev vznetdev simfs vzrst vzcpt vzdquota vzmon vzdev ip6t_frag xt_DSCP xt_owner xt_length xt_hl xt_tcpmss xt_TCPMSS xt_dscp nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc bridge sit tunnel4 ipt_REJECT xt_state iptable_filter ip6table_mangle iptable_mangle ip6t_LOG ipt_LOG xt_limit ipt_MASQUERADE xt_tcpudp xt_hashlimit ip6t_REJECT iptable_nat nf_nat xt_multiport nf_conntrack_ipv4 nf_conntrack ip6table_filter nf_defrag_ipv4 ip6_tables ip_tables x_tables act_police cls_u32 sch_ingress sch_htb aufs(C) 8021q garp stp powernow_k8 ipmi_si ipmi_devintf ipmi_msghandler loop snd_pcm snd_timer container snd i2c_amd756 soundcore i2c_core snd_page_alloc processor shpchp pcspkr amd64_edac_mod button psmouse evdev pci_hotplug k8temp serio_raw edac_core amd_rng rng_core edac_mce_amd reiserfs sha256_generic aes_x86_64 aes_generic cbc dm_crypt dm_mod raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 md_mod sd_mod crc_t10dif usbhid hid sg sr_mod cdrom ata_generic ohci_hcd ehci_hcd pata_amd qla2xxx mptspi mptscsih scsi_transport_fc libata floppy mptbase aic7xxx scsi_transport_spi scsi_tgt tg3 libphy usbcore nls_base thermal thermal_sys scsi_mod [last unloaded: scsi_wait_scan] [ 479.781985] Pid: 2298, comm: nfsd Tainted: G C 2.6.32-5-openvz-amd64 #1 dzhanibekov Sun Fire V20z [ 479.781985] RIP: 0010:[a0664601] [a0664601] exportfs_decode_fh+0x40/0x213 [exportfs] [ 479.781985] RSP: 0018:88007ee43ba0 EFLAGS: 00010246 [ 479.781985] RAX: RBX: RCX: 0003 [ 479.781985] RDX: 0003 RSI: 8800bbd8f028 RDI: 88007bc71800 [ 479.781985] RBP: 0003 R08: a066ce44 R09: 88009ad97a00 [ 479.781985] R10: R11: 9800 R12: 8800bbd8f028 [ 479.781985] R13: 8800be90b300 R14: 0003 R15: 8800bbd8f028 [ 479.781985] FS: 7f5b2f9b4700() GS:88008150() knlGS:b76066c0 [ 479.781985] CS: 0010 DS: 0018 ES: 0018 CR0: 8005003b [ 479.781985] CR2: 0008 CR3: 7eff3000 CR4: 06e0 [ 479.781985] DR0: DR1: DR2: [ 479.781985] DR3: DR6: 0ff0 DR7: 0400 [ 479.781985] Process nfsd (pid: 2298, veid=0, threadinfo 88007ee42000, task 88007f3ec000) [ 479.781985] Stack: [ 479.781985] 88009ad97a00 a066ce44 88007ee43c20 0073 [ 479.781985] 0 88007ee43c6c a05a72a9 88009ac3a1c0 88009ac3a1c0 [ 479.781985] 0 8800bbd8f010 8800be90b300 88009a1a2d80 8800bd1fa018 [ 479.781985] Call Trace: [ 479.781985] [a066ce44] ? nfsd_acceptable+0x0/0x10c [nfsd] [ 479.781985] [a05a72a9] ? cache_check+0x5f/0x2e3 [sunrpc] [ 479.781985] [a0671c7b] ? exp_find_key+0x69/0x7e [nfsd] [ 479.781985] [a066d2e7] ? fh_verify+0x31b/0x574 [nfsd] [ 479.781985] [8103a7e6] ? __wake_up_common+0x44/0x73 [ 479.781985] [8103f716] ? __wake_up+0x30/0x44 [ 479.781985] [a066db85] ? nfsd_access+0x29/0xff [nfsd] [ 479.781985] [a0675b9b] ? nfsd3_proc_access+0x70/0x7d [nfsd] [ 479.781985] [a066a329] ? nfsd_dispatch+0xdd/0x1b9 [nfsd] [ 479.781985] [a059ebd1] ? svc_process+0x3f5/0x619 [sunrpc] [ 479.781985] [a066a772] ? nfsd+0x0/0x12e [nfsd] [ 479.781985] [a066a857] ? nfsd+0xe5/0x12e [nfsd] [ 479.781985] [8106650e] ? kthread+0xc0/0xca [ 479.781985] [81011c6a] ? child_rip+0xa/0x20 [ 479.781985] [8106644e] ? kthread+0x0/0xca [ 479.781985] [81011c60] ? child_rip+0x0/0x20 [ 479.781985] Code: 48 81 ec 28 01 00 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 18 01 00 00 31 c0 4c 89 44 24
Bug#607790: installation-report: smooth install
Package: installation-reports Version: 2.43 Severity: minor Content-Type: text/plain; charset=us-ascii MIME-Version: 1.0 Content-Transfer-Encoding: 7bit From: Daniel Dickinson dan...@calordiman.fionavar.dd To: Debian Bug Tracking System sub...@bugs.debian.org Subject: installation-report: Panasonic CF-51 Toughbook Installed Smoothly Message-ID: 20101222085145.21432.91184.report...@calordiman.fionavar.dd X-Mailer: reportbug 4.12.6 Date: Wed, 22 Dec 2010 03:51:45 -0500 X-Debbugs-Cc: deb...@cshore.neomailbox.net Package: installation-reports Version: 2.43 Severity: minor Smooth install, just so you know. -- Package-specific info: Boot method: CD Image version: netinst daily build downloaded late 2010-12-21 Machine: Panason CF-51 Toughbook (Laptop) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: I had a wired connection so I didn't install the wireless firmware from the tarball. Adding wireless afterwards was a bit of a pain, but that's not an installer problem. Also, the laptop task asked about starting hddtemp on boot. Not sure if that should be preconfigured instead of asked. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=6.0 (squeeze) - installer build 20101221-15:52 X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == uname -a: Linux calordiman 2.6.32-5-486 #1 Fri Dec 10 15:32:53 UTC 2010 i686 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) lspci -knn: Subsystem: Matsushita Electric Industrial Co., Ltd. Device [10f7:8338] lspci -knn: Kernel driver in use: agpgart-intel lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) lspci -knn: Subsystem: Matsushita Electric Industrial Co., Ltd. Device [10f7:8338] lspci -knn: 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03) lspci -knn: Subsystem: Matsushita Electric Industrial Co., Ltd. Device [10f7:8338] lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) lspci -knn: Subsystem: Matsushita Electric Industrial Co., Ltd. Device [10f7:8338] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) lspci -knn: Subsystem: Matsushita Electric Industrial Co., Ltd. Device [10f7:8338] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) lspci -knn: Subsystem: Matsushita Electric Industrial Co., Ltd. Device [10f7:8338] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) lspci -knn: Subsystem: Matsushita Electric Industrial Co., Ltd. Device [10f7:8338] lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) lspci -knn: 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 04) lspci -knn: Subsystem: Matsushita Electric Industrial Co., Ltd. Device [10f7:8346] lspci -knn: 00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 04) lspci -knn: Subsystem: Matsushita Electric Industrial Co., Ltd. Device [10f7:834e] lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) lspci -knn:
Bug#607242: xserver-xorg-input-all: my mouse behaves strangely. I get dropping event due to full queue! in my X.org.log
reassign 607242 xserver-xorg-input-evdev 1:2.3.2-6 thanks On Thu, Dec 16, 2010 at 10:33:27AM +0530, shirish शिरीष wrote: Package: xserver-xorg-input-all Version: 1:7.5+8 Severity: important *** Please type your report below this line *** My mouse behaves very strangely. It jumps and does all sorts of things. I looked at /var/log/Xorg.0.log and it showed me the 'dropping events due to full queue! statements. Now I don't know why its dropping them. According to your log, it's using the evdev driver (which is normal) so I'm reassigning the bug. The only thing I run besides my browser is BOINC for grid computing and on this dual-core desktop I have given it only one SMP to run and that too at 25% of the time. Please lemme know if something is wrong at my end as well. Attaching the Xorg.0.log as well. I don't think that the problem, but you could try not running BOINC and see if it works better. Also you could try testing with a different mouse. I'm not an input expert, so I don't have much idea on that. For some reason (maybe the size it's more than 32k, which is huge for an email) your report did not make it to the debian-x mailing list, so maybe now that I'm replying an expert will see it ;) [...] -- Regards, Shirish Agarwal शिरीष अग्रवाल My quotes in this email licensed under CC 3.0 http://creativecommons.org/licenses/by-nc/3.0/ You know that the nc part of this license make it non-free right ? but that's a different topic ;) http://flossexperiences.wordpress.com 065C 6D79 A68C E7EA 52B3 8D70 950D 53FB 729A 8B17 Best Regards, -- Julien Viard de Galbertjul...@vdg.blogsite.org http://silicone.homelinux.org/ jul...@silicone.homelinux.org -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607791: libvirt-bin: No support for qemu in command 'attach-disk'
Package: libvirt-bin Version: 0.8.3-5 Severity: normal I have libvirt-bin 0.8.3-5 in squeeze. I am trying to attach more disks to a kvm image. The qemu driver is unsupported. Attaching a new disk using virsh won't work: # virsh attach-disk guest_server file.img vdb --type=disk --driver=qemu error: No support for qemu in command 'attach-disk' The only way to add a new disk is using driver=file. That is later unsupported by kvm and the xml config file must be fixed manually: # virsh attach-disk guest_server file.img vdb --type=disk --driver=file Disk attached successfully # virsh stop guest_server # virsh start guest_server error: Failed to start domain sonja error: internal error unsupported driver name 'file' for disk '/var/lib/libvirt/images/file.img' I found a workaround changing the driver to from file to qemu using virsh edit. It looks like it is fixed upsteam in release libvirt-0.8.2-8.el5 https://bugzilla.redhat.com/show_bug.cgi?id=609422 Though dpkg -l libvirt-bin shows I have: libvirt-bin 0.8.3-5 this feature still fails. Even with a different parameters suggested there: # virsh attach-disk guest_server file.img vdb --sourcetype block --driver qemu --subdriver raw error: command 'attach-disk' doesn't support option --sourcetype -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores) Locale: LANG=ca_ES.UTF-8, LC_CTYPE=ca_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libvirt-bin depends on: ii adduser 3.112+nmu2 add and remove users and groups ii libavahi-client3 0.6.27-2 Avahi client library ii libavahi-common3 0.6.27-2 Avahi common library ii libblkid1 2.17.2-3.3 block device id library ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libcap-ng00.6.4-1An alternate posix capabilities li ii libdevmapper1.02.12:1.02.48-4The Linux Kernel Device Mapper use ii libgcrypt11 1.4.5-2LGPL Crypto library - runtime libr ii libgnutls26 2.8.6-1the GNU TLS library - runtime libr ii libnl11.1-6 library for dealing with netlink s ii libparted0debian1 2.3-4 The GNU Parted disk partitioning s ii libpciaccess0 0.12.0-1 Generic PCI access library for X ii libreadline6 6.1-3 GNU readline and history libraries ii libsasl2-22.1.23.dfsg1-6 Cyrus SASL - authentication abstra ii libudev0 164-3 libudev shared library ii libuuid1 2.17.2-3.3 Universally Unique ID library ii libvirt0 0.8.3-5library for interfacing with diffe ii libxenstore3.04.0.1-1Xenstore communications library fo ii libxml2 2.7.8.dfsg-1 GNOME XML library ii logrotate 3.7.8-6Log rotation utility Versions of packages libvirt-bin recommends: ii bridge-utils 1.4-5 Utilities for configuring the Linu ii dnsmasq-base 2.55-2 A small caching DNS proxy and DHCP ii ebtables 2.0.9.2-2 Ethernet bridge frame table admini ii gawk 1:3.1.7.dfsg-5 GNU awk, a pattern scanning and pr ii iptables 1.4.8-3administration tools for packet fi ii libxml2-utils 2.7.8.dfsg-1 XML utilities ii netcat-openbsd1.89-4 TCP/IP swiss army knife ii qemu 0.12.5+dfsg-3 fast processor emulator ii qemu-kvm 0.12.5+dfsg-5 Full virtualization on x86 hardwar Versions of packages libvirt-bin suggests: ii policykit-1 0.96-4 framework for managing administrat -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607792: Provide GConf key to remove Places from the menu bar
Package: gnome-panel Version: 1:2.30.2-1ubuntu3 Severity: wishlist Tags: patch Hi, currently, even if the lockdown options are enabled, users cannot remove nor hide the Places entry from the menu bar. Here is a patch, taken from the RedHat's bugzilla [1] (and maybe needs some work), to provide a GConf key which would give users the opportunity to do that without rebuilding the package from the sources: https://bugzilla.redhat.com/attachment.cgi?id=358567 Here you find upstream's bug report, too: https://bugzilla.gnome.org/show_bug.cgi?id=417853 Thanks in advance, and keep up the great work! [1] https://bugzilla.redhat.com/show_bug.cgi?id=519156 -- System Information: Debian Release: squeeze/sid APT prefers maverick-updates APT policy: (500, 'maverick-updates'), (500, 'maverick-security'), (500, 'maverick-backports'), (500, 'maverick') Architecture: amd64 (x86_64) Kernel: Linux 2.6.35-23-generic (SMP w/4 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gnome-panel depends on: ii gnome-about 1:2.32.0-0ubuntu1 The GNOME about box ii gnome-control-center 1:2.32.0-0ubuntu2 utilities to configure the GNOME d ii gnome-desktop-data1:2.32.0-0ubuntu1 Common files for GNOME desktop app ii gnome-menus 2.30.4-0ubuntu1an implementation of the freedeskt ii gnome-panel-data 1:2.30.2-1ubuntu3 common files for the GNOME Panel ii libatk1.0-0 1.32.0-0ubuntu1The ATK accessibility toolkit ii libbonobo2-0 2.32.0-0ubuntu1Bonobo CORBA interfaces library ii libbonoboui2-02.24.3-1ubuntu1The Bonobo UI library ii libc6 2.12.1-0ubuntu10 Embedded GNU C Library: Shared lib ii libcairo2 1.10.0-1ubuntu3The Cairo 2D vector graphics libra ii libcanberra-gtk0 0.25-0ubuntu1 Gtk+ helper for playing widget eve ii libcanberra0 0.25-0ubuntu1 a simple abstract interface for pl ii libdbus-1-3 1.4.0-0ubuntu1 simple interprocess messaging syst ii libdbus-glib-1-2 0.88-2 simple interprocess messaging syst ii libecal1.2-7 2.30.3-2ubuntu2Client library for evolution calen ii libedataserver1.2-13 2.30.3-2ubuntu2Utility library for evolution data ii libedataserverui1.2-8 2.30.3-2ubuntu2GUI utility library for evolution ii libgconf2-4 2.31.91-0ubuntu3.1 GNOME configuration database syste ii libgdk-pixbuf2.0-02.22.0-0ubuntu1GDK Pixbuf library ii libglib2.0-0 2.26.0-0ubuntu1The GLib library of C routines ii libgnome-desktop-2-17 1:2.32.0-0ubuntu1 Utility library for loading .deskt ii libgnome-menu22.30.4-0ubuntu1an implementation of the freedeskt ii libgtk2.0-0 2.22.0-0ubuntu1The GTK+ graphical user interface ii libgweather1 2.30.3-0ubuntu1GWeather shared library ii libical0 0.44-3 iCalendar library implementation i ii libice6 2:1.0.6-1 X11 Inter-Client Exchange library ii liborbit2 1:2.14.18-0.1 libraries for ORBit2 - a CORBA ORB ii libpanel-applet2-01:2.30.2-1ubuntu3 library for GNOME Panel applets ii libpango1.0-0 1.28.1-1ubuntu3Layout and rendering of internatio ii libpolkit-gobject-1-0 0.96-2ubuntu1 PolicyKit Authorization API ii librsvg2-22.32.0-0ubuntu1SAX-based renderer library for SVG ii libsm62:1.1.1-1 X11 Session Management library ii libwnck22 1:2.30.5-0ubuntu1 Window Navigator Construction Kit ii libx11-6 2:1.3.3-3ubuntu1 X11 client-side library ii libxrandr22:1.3.0-3 X11 RandR extension library ii policykit-1-gnome 0.96-2ubuntu4 GNOME authentication agent for Pol ii python2.6.6-2ubuntu2 interactive high-level object-orie ii python-gconf 2.28.1-1ubuntu2Python bindings for the GConf conf ii python-gnome2 2.28.1-1ubuntu2Python bindings for the GNOME desk Versions of packages gnome-panel recommends: ii alacarte0.13.2-0ubuntu1 easy GNOME menu editing tool ii evolution-data-server 2.30.3-2ubuntu2 evolution database backend server ii gnome-applets 2.30.0-3ubuntu3 Various applets for the GNOME pane ii gnome-icon-theme2.31.0-0ubuntu1 GNOME Desktop icon theme ii gnome-session 2.32.0-0ubuntu1 The GNOME Session Manager - GNOME ii gvfs1.6.4-0ubuntu1.1 userspace virtual filesystem - ser ii indicator-applet0.4.6-0ubuntu1 GNOME panel indicator applet Versions of packages gnome-panel suggests: pn epiphany-brows none(no description available) ii evolution 2.30.3-1ubuntu7.1 groupware suite with mail client a ii gnome-terminal 2.32.0-0ubuntu1 The GNOME terminal emulator applic ii gnome-user-gui
Bug#528001: Appears to have been fixed in 2.3.4
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 tags 528001 - patch thanks Hi It appears that all the patches here have been applied. I have not closed it because I assumed it was still open since there is no check for (e.g.) d/source/include-binaries. ~Niels -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQIcBAEBCAAGBQJNEcOdAAoJEAVLu599gGRC7YEP/R4BKHg5ynGgRAX463i52Pcg 4J8lawJH+LalxCD3N5LXF8oWM5+k+pbGX4+iLtJL6MSUukyF6j3JW5e6ShTPXz+A z08g4jdDf3Di5cnxvqU0jpqdy8UPOnqbNJ37OuP2ZjkrNZalkQ9fsueXDSenUrDT 2iIWCalyS4iOm1F+cQ7RL1i0cd1VkGDdAOFTZumLjJWL+QZffnMOcMQTxbtyWzKa 0lKqhdENNOX5ML07oQc2AyR7sk2WWku/toh/8p3kJ8va0XhxZdndofD/HDYYFbZ2 at/oyjw/ZINs1u30/AzBbi+T68m/eceY/8nU0bcS2ZSrb1wfQCK+w1M8Yr5T+y6i jV3b4LFWvWtvNE9Oh97oPp2mVI3ZLCogHrBRAWVZrpthK2qWYdCmbnyDmVJ5Xwft 13JCl0H1kU0RUxSQi5nwR7nSvn2MglAD4AgS7B34mjv4eXUzzB70kCf3KE7mTmN7 k64btzi1rOVD4rTY2DtKl0lD7qVmgSLaEswYnLV+jw7AHP84cyC/exLGAF/4/hV/ BDqEPHExhoqWv/St2BUlWVmxVZvUp5X7M7vpCU8th/gH2fD/6c5nUGKz77/01iFD 7ZUX/ZxXkC7xovvtDT3ZR8Ocx5brwnuaRuhknUOpBJ0PwlJ8aOyZNDr+Ua/PkDlN BYJPK4YHRP+vHDjNuzNJ =1uKi -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#606964: linux-image-2.6.32-5-xen-amd64: Xen fails to boot dom0 kernel on system with, lots of RAM
On Wed, 2010-12-22 at 07:20 +0100, Rik Theys wrote: Hi, On 12/14/2010 02:41 PM, Ian Campbell wrote: When adding dom0_mem=2G to the boot line, the system boots OK. I expect it will work ok with everything up to and including dom0_mem=32G? It does. Thanks. It depends a bit on your usecase but it is often best recommended to use dom0_mem= anyway, since you are most often going to balloon dom0 down significantly anyway to make room for guest domains. I agree and I was planning to use the dom0_mem parameter. But I did expect the system to actually boot. Maybe it should be mentioned somewhere that the dom0_mem _must_ be set on systems with 32GB memory? Yes, I should at least mention it in the wiki or something. I was wondering about clamping something in the kernel to correspond to CONFIG_XEN_MAX_DOMAIN_MEMORY and avoid the issue but you say the crash is after x VCPUS and before Scrubbing Free RAM so I'm surprised the dom0 kernel has run at this point and hence changing it would not help. The hypervisor doesn't know about this guest configuration item so there isn't much which can be done there. To try and confirm what is going on is there any chance you could you collect a serial console log with verbose debugging enabled by using the command line parameters described in Are there more debugging options I could enable to troubleshoot booting problems? of http://wiki.xensource.com/xenwiki/XenParavirtOps (without the recommended dom0_mem). The primary options of interest in this case are loglvl=all guest_loglvl=all sync_console console_to_ring on the hypervisor plus com1=115200,8n1 console=com1 to enable serial logging and console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 on the kernel. Assuming that shows that the domain 0 kernel did actually get a chance to run and crash I'll take a look at what else needs to be clamped to have it just work. Thanks, Ian. -- Ian Campbell Current Noise: Suffocation - Demise Of The Clone Conscience doth make cowards of us all. -- Shakespeare -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607793: linux-image-2.6.26-2-686: scsi related kernel panic in 686 during boot, works in 486
Package: linux-2.6 Version: 2.6.26-26lenny1 Severity: normal I've recently installed Lenny on an old HP NetServer E60 machine. The installer worked perfectly, but after the reboot I got a kernel panic with flashing keyboard lights. A search lead me to bug 486168, which seems very similar (same hardware, same panic message). The comments there suggest using rescue mode to install a 486 kernel and boot it. I did that, and the system now works, but the 486 kernel recognizes just one CPU and not both. (I'm not sure if this is a limitation of the 486 kernel or not) A late comment in bug 486168 suggests disabling the memory hole in the BIOS settings. I checked the BIOS settings on my machine and the memory hole is disabled, yet the kernel panic still happens. I'd like to load the 686 kernel for increased performance, and possibly to take advantage of SMP. -- Package-specific info: ** Kernel log: boot messages should be attached Can't make it save the boot messages to a file, so uploaded as YouTube video at: http://www.youtube.com/watch?v=0ahFTUIY4ZY I hope the quality is enough. crash it around 00:22 Note that I edited the kernel command line in grub. I did this to remove the quiet option, so that more info is on screen. ** Model information HP NetServer E60 ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth1 iface eth1 inet dhcp ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort+ SERR- PERR- INTx- Latency: 64 Region 0: Memory at 3000 (32-bit, prefetchable) [size=256M] Capabilities: [a0] AGP version 1.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=none Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 128 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 9000-9fff Memory behind bridge: fc20-fc2f Prefetchable memory behind bridge: fd00-fdff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort+ SERR- PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- Reset- FastB2B+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:04.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 00:04.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 32 Region 0: [virtual] Memory at 01f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 03f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 0170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 0370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at 1860 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:04.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 32 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:04.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev
Bug#607719: release-notes: Spelling error
On 21 December 2010 13:14, Mathew Meins math...@internode.on.net wrote: Found a minor spelling error in upgrading.dbk, under section 4.11 (Obsolete packages.) I suspect this is supposed to be than for thousand, rather than thanfor thousand. Thanks for the report. I will fix this as soon as possible (currently my Internet connection is down, unfortunately). As the Release Notes are not yet finalised we have not yet done a full spell check review of them, but it certainly needs to be done. Regards Javier -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607751: snort: Update gives current Snort configuration is invalid error and it will not start
+++ Initializing rule chains... Warning: /etc/snort/rules/dos.rules(42) = threshold (in rule) is deprecated; use detection_filter instead. ERROR: /etc/snort/rules/community-smtp.rules(13) = !any is not allowed Fatal Error, Quitting.. ---8--- This happens because the SMTP_SERVERS variable is define das 'any'. This variable is configured based, IIRC, on your setting of HOME_NET. So you should review your /etc/snort/snort.conf configuration file is properly defined. IIRC the value of HOME_NET is based on the defintion of DEBIAN_HOME_NET (in /etc/snort/snort.debian.conf) which is, in turn, is defined by the administrator when installing the package (through debconf). If the value is not properly defined this kind of stuff can happen. So I don't fully believe it is a bug in the package, it is associated with the user's configuration. However, the fix of this bug is really simple, just comment out the offending line. Alternatively, the debconf prompt could check that DEBIAN_HOME_NET is not defined to values that might cause problems. There is no code in the configuration scripts to ensure this currently, but could be added. Regards Javier -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607744: sun-java6-plugin: Iceweasel crash
Il Tue, Dec 21, 2010 at 09:26:54PM +0100, Torsten Werner scrisse: Hi Stefano, On Tue, Dec 21, 2010 at 5:51 PM, stefano ste...@infinito.it wrote: Sometimes, if display a popup about java cache (with plug-in enabled) then iceweasel don't crash after. I have the same setup as you. My iceweasel works nicely with the Java plugin. You can enable the Java console and some debugging with jcontrol. And you might want to contact the iceweasel maintainer to find debugging options on the browser side. Thanks for feedback. I have enabled the java console on jcontrol and tracing and logs too, but iceweasel crash first I see some output. mer dic 22 09:50:17 stef...@hpdv5: ~/Documenti bash $ iceweasel TypeError: imns.Cc['@iopus.com/tcpsi;1'] is undefinedSegmentation fault p.s. TypeError: imns.Cc['@iopus.com/tcpsi;1'] is undefined is from an add-on with java enaled or disabled. Nor console or log files I found. Again, I have reinstalled the package after purge but crash again. I have seen the java console one time while I have seen the java cache popup too. Maybe I need to ask to iceweasel maintainer how have more debug: could you tell me the right way? Cheers, Torsten Ciao -- Stefano Callegari ste...@infinito.it -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607678: snort-pgsql: Error in postinst near line 125
severity 607678 serious thanks There is a missing then and an excess fi near line 125. You are right, there was a typo in the file. Since this impacts the package installation I'm going to mark this bug as serious. Attached is a patch fixing the issue. I have (local) issues and cannot upload new packages until they are fixed. If anybody feels the need to NMU pleas go ahead, if not, I will upload the fix as soon as possible. Regards Javier snort_2.8.5.2-4.bugfix.diff Description: Binary data
Bug#607688: [debian-installer] Some Spanish strinng malformed
On 21 December 2010 07:14, Christian PERRIER bubu...@debian.org wrote: This is an encoding problem in debconf's Spanish translation (yay for ISO-8859-1). The file is a mix of UTF-8 and ISO-8859-1 characters (those useless X-POFile-SpellExtra: headers) Some comments: - the file declares itself (in the PO header) that is UTF-8, I don't know why debconf tries to figure out the encoding if it is clearly defined in the headers. The X-POFile-SpellExtra headers should be omitted by debconf. - the X-POFile-SpellExtra headers are not useless, there are actually quite useful to do a spellcheck of the file using gettext-lint tools easily and catch mistakes in the translation. They list the words that have been considered good and are part of the dictionary used for spell-checking the file. - the X-POFile-SpellExtra headers where in ISO-8859-1 because I (in the past) used ispell for spell checking (which does not support UTF-8) as aspell did not work with POFileSpell, the latest version of gettex-lint (uploaded recently to the archive) works with aspell perfectly fine so I will switch. In any case, the fix for this bug is recoding just the X-POFile-SpellExtra headers to UTF-8. Christian, I cannot review right now the file you sent but I guess that's what you did. Regards Javier -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607737: Patch for 607737
On Wed, Dec 22, 2010 at 00:04:35 +, brian m. carlson wrote: diff -ur libuninum.old/unicode.h libuninum-2.7/unicode.h --- libuninum.old/unicode.h 2010-12-21 21:35:42.0 + +++ libuninum-2.7/unicode.h 2010-12-21 23:57:33.0 + @@ -1,8 +1,10 @@ -typedef unsigned longUTF32; /* at least 32 bits */ -typedef unsigned short UTF16; /* at least 16 bits */ -typedef unsigned short UCS2; /* at least 16 bits */ -typedef unsigned charUTF8; /* 8 bits */ -typedef unsigned charBoolean; /* 0 or 1 */ +#include stdint.h + +typedef uint32_t UTF32; /* at least 32 bits */ +typedef uint16_t UTF16; /* at least 16 bits */ +typedef uint16_t UCS2; /* at least 16 bits */ +typedef uint8_t UTF8; /* 8 bits */ +typedef uint8_t Boolean; /* 0 or 1 */ should probably change the comments, since apparently at least 32 bits is not what was meant here, or this bug would never have happened. Cheers, Julien signature.asc Description: Digital signature
Bug#469104: installation-reports: Normal C/R netinstall successful except screen resolution too low
Hello Robert, Back in 2008, you submitted debian bug #469104. After looking at the log, it seams to me that the TDFX driver chooses it's resolution before reading the EDID information from the monitor. So it uses some default values for the hsync vrefresh range. You can try setting the appropriate ranges in your xorg.conf in section monitor: Section Monitor Identifier Generic Monitor Option DPMS HorizSync hmin-hmax VertRefresh vmin-vmax EndSection You can use the datasheet of your monitor to feel the ranges, or use some tools to detect them (ddcprobe might do it). I don't know if the driver is still developed, I mean 3dfx are pretty old cards now, so this is unlikely to be fixed, anyway you could also test debian squeeze. If it's fixed, tell me the version you are using so that I can close the bug. Best Regards, -- Julien Viard de Galbertjul...@vdg.blogsite.org http://silicone.homelinux.org/ jul...@silicone.homelinux.org -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607725: BUG REPORT : Debian package LIBSMBIOS2 hasn't been updated for 2 years
On 21/12/10 20:58, José Luis Tallón wrote: Aurelien Lemaire wrote: [snip] Assuming you 're all busy as squeeze coming soon, i won't be too pushy but libsmbios2 hasn't been maintained for the last 2 years and now got the deprecated 2.0.3 version for any Debian distro (stable, testing and unstable ). At the same time, the upstream project has release 25 new versions and is now at version 2.2.26 which Unbuntu as successfully packaged I just need an sponsor for this .. as soon as someone steps up, I'll have it up. Thanks for your reply, I thought your uploader was Loic Minier l...@dooz.org, isn't he anymore ? It's Xmass time : Loic can't refuse you this favor. Regards, A. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#560111: what is the aftermath?
On Tue, Dec 21, 2010 at 10:44:19PM -0500, Yaroslav Halchenko wrote: It was lovely progression of discussion in regards to a newer snapshot of portaudio2 for Debian... but it seems all activities have not triumphed in the actual upload. Meanwhile I see Ubuntu took off the ground and carries 19+svn20100802, and even carries all the changelog items closing Debian bugs ;) So, what has stopped the upload? any help needed? or just a kick? ;) It seems to me that this package might be more suitable to be maintained as part of the Multimedia team. Just a suggestion, no intend of critisizing the delay, it is just how I got the attention of this packaging effort. - Jonas -- * Jonas Smedegaard - idealist Internet-arkitekt * Tlf.: +45 40843136 Website: http://dr.jones.dk/ [x] quote me freely [ ] ask before reusing [ ] keep private signature.asc Description: Digital signature
Bug#607794: latest BIND9 update breaks DNSSEC resolution (SERVFAIL) of some debian.org hosts
Package: bind9
Version: 1:9.6.ESV.R3+dfsg-0+lenny1
When using DNSSEC validation by adding the following lines to named.conf
dnssec-enable yes;
dnssec-validation yes;
dnssec-lookaside . trust-anchor dlv.isc.org.;
trusted-keys {
dlv.isc.org. 257 3 5
BEPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2
brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+
1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5
ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk
Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM
QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt TDN0YUuWrBNh;
};
several hosts in the debian.org domain (security.debian.org,
volatile.debian.org, www.debian.org, packages.debian.org) are no longer
resolvable.
dig reports SERVFAIL.
named reports the following errors to daemon.log:
Dec 22 10:20:13 named[23555]: validating @0x7f7a780af9a0:
packages.debian.org A: no valid signature found
Dec 22 10:36:02 named[23555]: validating @0x7f7a780a0d50:
security.debian.org A: no valid signature found
Dec 22 10:37:56 named[23555]: validating @0x7f7a8532fc50:
www.debian.org A: no valid signature found
Workaround: disable DNSSEC validation.
Debian GNU/Linux 5.0.7, Kernel 2.6.26-2-amd64 and libc6 2.7-18lenny6.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607795: RM: pyofa - ROM - 3rd party service required now defunct
Package: ftp.debian.org Severity: normal Hi, Please could pyofa be removed from the archive. It required the use of a 3rd party service on the internet, that is no longer active. So the python module is now useless. Thanks -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607580: ntop: fails to stop/start, break on upgrade . probably a local issue still there are bugs in postinst
Le mardi 21 décembre 2010 à 20:10 -0500, jor...@linuxgen.com a écrit : I think the reason that the second db_input was not trigger was because I did not set seen to false. db_fset ntop/admin_password seen false db_fset ntop/admin_password_again seen false Do we want to ask the password again when the package failed to configure due to missing ntp binary in ntp.config ? or on reinstall. If so yes. Regards, Jordan Metzmeier -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607796: Should include lvs=/sbin/lvs option in default /etc/mylvmbackup.conf
Package: mylvmbackup
Version: 0.9-1
Severity: normal
Tags: patch
Option lvs= is not included in default /etc/mylvmbackup.conf
If you launch backupfrom a root shell, it makes no difference, because /sbin
is in root's path. But if you launch it from a cron job, it fails with te
following error:
't exec lvs: No existe el fichero o el directorio at /usr/bin/mylvmbackup
line 734 (#1)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
Use of uninitialized value $lv in substitution (s///) at
/usr/bin/mylvmbackup
line 736 (#1)
(W uninitialized) An undefined value was used as if it were already
defined. It was interpreted as a or a 0, but maybe it was a mistake.
To suppress this warning assign a defined value to your variables.
To help you figure out what was undefined, perl will try to tell you the
name of the variable (if any) that was undefined. In some cases it
cannot
do this, so it also tells you what operation you used the undefined
value
in. Note, however, that perl optimizes your program and the operation
displayed in the warning may not necessarily appear literally in your
program. For example, that $foo is usually optimized into that
. $foo, and the warning will refer to the concatenation (.) operator,
even though there is no . in your program.
Use of uninitialized value $lv in substitution (s///) at
/usr/bin/mylvmbackup
line 737 (#1)
This option will be the same for nearly all Debian users and cases, so it
should be put by default in configuration file.
-- System Information:
Debian Release: 5.0.7
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages mylvmbackup depends on:
ii libconfig-inifiles-perl 2.39-5 Read .ini-style configuration file
ii libdbd-mysql-perl 4.007-1+lenny1 A Perl5 database interface to the
ii libtimedate-perl 1.1600-9 Time and date functions for Perl
ii lvm2 2.02.39-8 The Linux Logical Volume Manager
mylvmbackup recommends no packages.
Versions of packages mylvmbackup suggests:
ii mysql-server 5.0.51a-24+lenny4 MySQL database server (metapackage
ii mysql-server-5.0 [mysq 5.0.51a-24+lenny4 MySQL database server binaries
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607242: xserver-xorg-input-all: my mouse behaves strangely. I get dropping event due to full queue! in my X.org.log
tags 607242 + moreinfo thanks On Wed, Dec 22, 2010 at 10:06:58AM +0100, Julien Viard de Galbert wrote: [...] I'm not an input expert, so I don't have much idea on that. For some reason (maybe the size it's more than 32k, which is huge for an email) your report did not make it to the debian-x mailing list, so maybe now that I'm replying an expert will see it ;) Got an expert advice ;) Apparently dropping event due to full queue indicates that the kernel never sends EV_SYN for this device. The driver queue the button and motion events until it gets the sync, so with no sync, the queue gets full... You should install evtest, and launch it once your mouse start to behave wrong. (to find the device you have to give in parameter you can look at your Xorg.0.log, it was /dev/input/event5 in the log you sent. so launch # evtest /dev/input/event5 move your mouse a little, and send us the output. That would help understanding what's wrong. Thanks for your time, -- Julien Viard de Galbertjul...@vdg.blogsite.org http://silicone.homelinux.org/ jul...@silicone.homelinux.org -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#601341: Bug#604096: Bug#601341: Bug#602418: #601341, #602418 and #604096 seem to be duplicates
On Tue, 2010-12-21 at 15:02 -0500, Konrad Rzeszutek Wilk wrote: [...] So e1687eae is upstream, yes, it's c07fbfd17e61 upstream. I switched to that since I prefer upstream versions where possible. [...] Hmm, did you also include: ttm: When TTM_PAGE_FLAG_DMA32 allocate pages under and in your tree, ah yes - you pulled the devel/ttm.pci-api-v2 which has an updated variant of that. dbbc947 and 95518271 seem to have a lot in common. Yup. The architecture of the ttm code changed from 2.6.34-2.6.37. Thanks. S since the Debian kernel has has DRM/TTM from 2.6.33 I assume I want the NEEDS_IOREMAP (95518271) version. I'm about to try my backport of devel/ttm.pci-api-v2 which contains: drm/ttm: Add ttm_tt_free_page ttm: Introduce a placeholder for DMA (bus) addresses. ttm: Utilize the dma_addr_t array for pages that are to in DMA32 pool. ttm: Expand (*populate) to support an array of DMA addresses. radeon/ttm/PCIe: Use dma_addr if TTM has set it. nouveau/ttm/PCIe: Use dma_addr if TTM has set it. radeon/PCIe: Use the correct index field. plus: 9551827190db ttm: Set VM_IO only on pages with TTM_MEMTYPE_FLAG_NEEDS_IOREMAP set. c54d5aa10b7a ttm: Change VMA flags if they != to the TTM flags. c07fbfd17e61 fbmem: VM_IO set, but not propagated d541daf6b956 pvops: make pte_flags() go via pvops In addition the Debian kernel already contains 25021c9 x86: define arch_vm_get_page_prot to set _PAGE_IOMAP on VM_IO vmas 2eb6682 drm: recompute vma-vm_page_prot after changing vm_flags pvops: make pte_flags() go via pvops was the only bit of the patches which were omitted from the Debian kernel (the revert of bcf16b6b4f34) which didn't already appear to have been replaced by the other patches (ignoring all the AGP stuff) so I figured I may as well give it a go. My previous attempt (with all of the above except but make pte_flags() go via pvops) failed because I botched the backport of radeon/PCIe: Use the correct index field. and only fixed one of the wrong indexes. FWIW I think that patch should be folded down into the original patch for upstreaming. Ian. -- Ian Campbell Current Noise: Raise Hell - To The Gallows Bo Derek ruined my life! -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607797: boot hangs with pcspkr driver error
Package: udev Version: 164-3 Hi there, I just installed Debian Squeeze on my Thinkpad X41 notebook. Then installed a couple packages and on reboot the system hangs on this message: Waiting for /dev to be fully populated... [12.612160] Error: Driver 'pcspkr' is already registered, aborting ... Everything is standard, I did not yet change anything. I replaced the standard hd with a compact flash module and therefore used the btrfs filesystem for my root/home drive (boot drive is seperate) and also encrypted it using the installer (encrypt drive using luks). System booted fine twice when I first installed it. Only hangs after installing a whole bunch of desktop related packages, among them udev. Feel free to move this bug to an appropriate package if you think udev is not responsible. Thx, Malte -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607797: boot hangs with pcspkr driver error
On Dec 22, bugrep...@2c2.de wrote: I just installed Debian Squeeze on my Thinkpad X41 notebook. Then installed a couple packages and on reboot the system hangs on this message: The driver error is unrelated. Does it continue if you wait three minutes? Look at #607533 for how to debug it, you need to find out why it's deadlocking. -- ciao, Marco signature.asc Description: Digital signature
Bug#600927: gdm3: mouse cursor remains a 'clock'
Le mardi 21 décembre 2010 à 19:58 +0100, Miklos Quartus a écrit : I experience the same problem after a clean install of Debian Squeeze from squeeze-di-beta2 i386 CD. Cursor remains a 'clock' in the login screen even after login-logout. I have no metacity. Otherwise no impact on overall behaviour of the system. Does removing the “X-GNOME-Autostart-Notify=true” line in /usr/share/gdm/autostart/LoginWindow/metacity.desktop help? In all cases I don’t think it’s a good idea to have gdm3 without metacity. Maybe it should be made a dependency. Cheers, -- .''`. : :' : “You would need to ask a lawyer if you don't know `. `' that a handshake of course makes a valid contract.” `--- J???rg Schilling -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607798: New upstream version available: 1.9
Package: potrace A new version is available upstream. Please consider updating the package. ChangeLog head: v1.9 2010/12/21 (2010/12/20) PS1 - getopt.h: fixed compiler warnings (2010/12/20) PS1 - added --tty option to specify progress bar rendering at runtime. (2010/12/20) PS1 - added simplified progress bar for Windows or other dumb terminals. New --enable-dumb-tty configuration option. (2010/12/16) PS1 - test suite: fixed bug where a failed test was not reported in backend-check.sh (2010/12/15) PS1 - test suite: support for $EXEEXT (2010/12/15) PS1 - optimized penalty3 inner loop, 4.6% speedup. (2010/12/15) PS1 - autoconf: new CADD variable to add to CFLAGS (2010/12/15) PS1 - fixed some compiler warnings, added some error handlers, and added some cosmetic top-level free's. (2010/11/25) PS1 - added support for some BMP version 4 and 5 files, and for top-down BMP files. Suggested by Kanwar Sangwan. (2010/11/13) PS1 - don't enter filter mode if -- is used (2010/11/09) PS1 - greymap.h, bitmap.h: drop unneeded dependencies (2010/09/07) PS1 - autoconf: fixed getopt_long test to allow cross-compiling, bug #3061403, reported by Igor Filippov. (2010/08/31) PS1 - test suite: added environment variables CHECK_POTRACE and CHECK_MKBITMAP to allow binaries outside the build tree to be tested (2010/08/09) PS1 - autoconf: converted to libtool (2010/08/05) PS1 - autoconf: renamed configure.in as configure.ac (2010/08/05) PS1 - autoconf: added --with-libpotrace to optionally install the Potrace library and header files. (2009/08/03) PS1 - portability: c++ wrapper in potracelib.h, suggested by Peter Jankuliak. (2009/05/13) PS1 - added pdfpage backend for fixed pagesize PDF output. (2008/10/08) PS1 - mkbitmap: speed increase by 8% to 26% by eliminating unnecessary bounds checks and interpolation. (2008/10/05) PS1 - trace.c: separate function for path reversal (2008/10/03) PS1 - progress.h: do the right thing if progress == NULL (2008/10/03) PS1 - moved detrand() to auxiliary.h (2008/08/21) PS1 - mkbitmap: added --blur option. (2008/08/12) PS1 - combined the old -V option with -v. (2008/08/12) PS1 - test suite: adjusted tolerances to fix bug #1745456 (2007/12/31) PS1 - include curve.h where path_t is used (2007/12/28) PS1 - flush stderr when interleaved with stdout (2007/12/28) PS1 - portability: don't hardcode size of short int (2007/11/09) PS1 - eps backend: use save-restore to avoid polluting caller's dictionary and for page independence. (2007/05/22) PS1 - xfig backend: added depth to opaque components to avoid them floating to the background. Suggested by Rafael Laboissiere. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607622: ingerman,iswiss: Fails to upgrade from lenny if previously reconfigured
On Mon, Dec 20, 2010 at 01:14:06PM +0100, Agustin Martin wrote: However, the problem is still present for every ingerman where reconfiguration was tried previously to the upgrade. Thus, I am leaving this bug report as RC since it can break upgrades, thanks for reminding. Furthermore, I noticed that same original problem exists for iswiss. I am cloning this bug report to iswiss. Attached patch ahould take care from preinst that bogus 'ingerman.compat' and 'iswiss.compat' are removed. iswiss.config is also fixed for wrong name. I think this should really care of all the upgrades for both iswiss and ingerman. I have a NMU ready for upload if needed. Uploaded to DELAYED/2 -- Agustin -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#426756: the mentioned patch would be wonderful applied against lenny sources
Would you mind integrating this patch, as it makes lenny udhcpc package capable for use with pypxeboot. I think it's a bit more work, to apply the patch against busybox-based-udhcpc in squeeze, but would love to see it there too Kind regards Holger Fischer -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607800: latex209-bin: fails to install
Package: latex209-bin Version: 25.mar.1992-12.3 Severity: serious User: debian...@lists.debian.org Usertags: piuparts piuparts.d.o Hi, during a test with piuparts I noticed your package failed to install. As per definition of the release team this makes the package too buggy for a release, thus the severity. From the attached log (scroll to the bottom...): Selecting previously deselected package latex209-bin. (Reading database ... 10503 files and directories currently installed.) Unpacking latex209-bin (from .../latex209-bin_25.mar.1992-12.3_all.deb) ... Setting up latex209-bin (25.mar.1992-12.3) ... Make the format file of `latex209'. This may take some time. ... fmtutil: running `tex -ini -jobname=latex209 -progname=latex209 latex209.ini' ... This is TeXk, Version 3.1415926 (TeX Live 2009/Debian) (INITEX) restricted \write18 enabled. (/usr/share/texmf/tex/latex209/config/latex209.ini (/usr/share/texmf/tex/latex209/config/lplain.tex Preloading the plain format: codes, registers, compatibility for TeX 2, parameters, macros, math definitions, hyphenation (/usr/share/texmf/tex/latex209/config/lhyphen.tex Loading hyphenation patterns for US english. (/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex)) (/usr/share/texmf/tex/latex209/config/lfonts.tex kpathsea: Running mktextfm lasy5 /usr/share/texmf/web2c/mktexnam: Could not map source abbreviation for lasy5. /usr/share/texmf/web2c/mktexnam: Need to update ? mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input lasy5 This is METAFONT, Version 2.718281 (TeX Live 2009/Debian) kpathsea: Running mktexmf lasy5 ! I can't find file `lasy5'. * ...e:=ljfour; mag:=1; nonstopmode; input lasy5 Please type another input file name ! Emergency stop. * ...e:=ljfour; mag:=1; nonstopmode; input lasy5 Transcript written on mfput.log. grep: lasy5.log: No such file or directory mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input lasy5' failed to make lasy5.tfm. kpathsea: Appending font creation commands to missfont.log. ! Font \fivly=lasy5 not loadable: Metric (TFM) file not found. to be read again \par l.205 ? ! Emergency stop. to be read again \par l.205 No pages of output. Transcript written on latex209.log. Error: `tex -ini -jobname=latex209 -progname=latex209 latex209.ini' failed ### fmtutil: Error! Not all formats have been built successfully. Visit the log files in directory /var/lib/texmf/web2c for details. ### This is a summary of all `failed' messages: `tex -ini -jobname=latex209 -progname=latex209 latex209.ini' failed The format file of `latex209' is NOT built successfully. dpkg: error processing latex209-bin (--configure): subprocess installed post-installation script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: latex209-bin E: Sub-process /usr/bin/dpkg returned an error code (1) cheers, Holger Start: 2010-12-20 03:49:36 UTC Package: latex209-bin Priority: optional Section: tex Installed-Size: 60 Maintainer: TSUCHIYA Masatoshi tsuch...@namazu.org Architecture: all Source: latex209 Version: 25.mar.1992-12.3 Depends: latex209-base Filename: pool/main/l/latex209/latex209-bin_25.mar.1992-12.3_all.deb Size: 4964 MD5sum: 4c7f53d48455f08a357c7e54c61a565a SHA1: 8befe606ff224e27a5d75b6cc5be5154de05846f SHA256: f1df153231f2822ac6a5c68c4ea86f4125e8cdc6793186493c89d812df533f6b Description: latex209 command for LaTeX 2.09 25-mar-1992 version LaTeX 2.09 is obsolete. Use LaTeX 2e. This package is for those who want to use old style files. Tag: interface::commandline, role::program, scope::utility, special::obsolete, use::typesetting, works-with::text, works-with-format::tex Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --warn-on-leftovers-after-purge --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad squeeze -b squeeze.tar.gz --mirror http://piatti.debian.org/debian/ latex209-bin Guessed: debian 0m0.0s INFO: -- 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: -- 0m0.0s INFO: piuparts version 0.39~201012191351 starting up. 0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-symlinks
Bug#532818: Fixed upstream
tags 532818 fixed-upstream thanks According to https://bugs.edge.launchpad.net/ubuntu/+source/zsync/+bug/661308/comments/7 this bug is fixed upstream in zsync 0.6.2. -- - mdz -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607801: snort-common: fails to install
Package: snort-common Version: 2.8.5.2-3 Severity: serious User: debian...@lists.debian.org Usertags: piuparts piuparts.d.o Hi, during a test with piuparts I noticed your package failed to install. As per definition of the release team this makes the package too buggy for a release, thus the severity. From the attached log (scroll to the bottom...): Selecting previously deselected package snort-common. (Reading database ... 7591 files and directories currently installed.) Unpacking snort-common (from .../snort-common_2.8.5.2-3_all.deb) ... touch: cannot touch `/etc/snort/database.conf': No such file or directory dpkg: error processing /var/cache/apt/archives/snort-common_2.8.5.2-3_all.deb (--unpack): subprocess new pre-installation script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: /var/cache/apt/archives/snort-common_2.8.5.2-3_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) cheers, Holger Start: 2010-12-20 20:49:57 UTC Package: snort-common Priority: optional Section: net Installed-Size: 356 Maintainer: Javier Fernandez-Sanguino Pen~a j...@debian.org Architecture: all Source: snort Version: 2.8.5.2-3 Replaces: snort ( 1.8.4beta1-1) Depends: perl-modules, debconf (= 0.5) | debconf-2.0, lsb-base Pre-Depends: adduser (= 3.11) Suggests: snort-doc Conflicts: snort ( 2.8.5.2-3) Filename: pool/main/s/snort/snort-common_2.8.5.2-3_all.deb Size: 164298 MD5sum: 7bba7b2a10425f391a67111b1451037b SHA1: d2b9df3fa447c3207ff6f8a84673ed3d19b6682d SHA256: 1b1ecf13cab89c2c749b7c19e2094cbc7f9cb7f679a83f49894a818be4d25169 Description: flexible Network Intrusion Detection System [common files] Snort is a libpcap-based packet sniffer/logger which can be used as a lightweight network intrusion detection system. It features rules based logging and can perform content searching/matching in addition to being used to detect a variety of other attacks and probes, such as buffer overflows, stealth port scans, CGI attacks, SMB probes, and much more. Snort has a real-time alerting capability, with alerts being sent to syslog, a separate alert file, or even to a Windows computer via Samba. . This is a common package which holds cron jobs, tools and config files used by all Snort-based packages. Homepage: http://www.snort.org/ Tag: admin::logging, admin::monitoring, interface::daemon, role::app-data, security::ids, special::auto-inst-parts, use::monitor Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad sid -b sid.tar.gz --mirror http://piatti.debian.org/debian/ snort-common Guessed: debian 0m0.0s INFO: -- 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: -- 0m0.0s INFO: piuparts version 0.39~201012191351 starting up. 0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad sid -b sid.tar.gz --mirror http://piatti.debian.org/debian/ snort-common 0m0.0s INFO: Running on: Linux piatti 2.6.32.27-dsa-amd64 #1 SMP Mon Dec 13 10:07:36 UTC 2010 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpSUkaxC 0m0.0s DEBUG: Unpacking sid.tar.gz into /org/piuparts.debian.org/tmp/tmpSUkaxC 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpSUkaxC', '-zxf', 'sid.tar.gz'] 0m2.0s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpSUkaxC', '-zxf', 'sid.tar.gz'] 0m2.0s DEBUG: Created policy-rc.d and chmodded it. 0m2.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpSUkaxC', 'apt-get', 'update'] 0m4.5s DUMP: Get:1 http://piatti.debian.org sid Release.gpg [835 B] Ign http://piatti.debian.org/debian/ sid/contrib Translation-en Ign http://piatti.debian.org/debian/ sid/main Translation-en Ign http://piatti.debian.org/debian/ sid/non-free Translation-en Get:2 http://piatti.debian.org sid Release [104 kB] Ign http://piatti.debian.org sid/main amd64 Packages/DiffIndex Ign http://piatti.debian.org sid/contrib amd64 Packages/DiffIndex Ign http://piatti.debian.org sid/non-free amd64 Packages/DiffIndex Get:3 http://piatti.debian.org sid/main amd64 Packages [9106 kB] Get:4 http://piatti.debian.org sid/contrib amd64 Packages [71.8 kB] Get:5 http://piatti.debian.org sid/non-free amd64 Packages [146 kB] Fetched 9428 kB in 1s (7074 kB/s) Reading package lists... 0m4.5s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpSUkaxC', 'apt-get', 'update']
Bug#607802: fontconfig: 65-nonlatin.conf incorrectly lists serified Chinese fonts such as ming under sans-serif section
Package: fontconfig Version: 2.8.0-2.1 Severity: minor Tags: lfs The default 65-nonlatin.conf includes fonts such as PMingLiu under the san- serif section with a comment chinese fonts are actually serified. As they are serified, they should not be listed under the san-serif section -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_HK.UTF-8, LC_CTYPE=en_HK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages fontconfig depends on: ii fontconfig-config 2.8.0-2.1generic font configuration library ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libexpat1 2.0.1-7 XML parsing C library - runtime li ii libfontconfig1 2.8.0-2.1generic font configuration library ii libfreetype62.4.2-2.1FreeType 2 font engine, shared lib ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime fontconfig recommends no packages. Versions of packages fontconfig suggests: ii defoma0.11.11Debian Font Manager -- automatic f -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607679: diff.gz + dsc - file
The attached files should only be an advice or example on how one could do this (o: Kind regards Holger Fischer -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590589: plasma-widget-networkmanagement: Applies to plasma widget, too
Package: plasma-widget-networkmanagement Version: 0.1~svn1141976-1 Severity: normal This also applies to the plasma network management widget. When the network-manager daemon is started after having previoulsy been stopped, the NetworkManager User Settings Service crashes and has to be restarted from the Service Manager in KDE's System Settings. The widget itself stays around though, and will reconnect after said service has been restarted. Just wanted to provide this additional info. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages plasma-widget-networkmanagement depends on: ii knm-runtime 0.1~svn1141976-1 KDE NetworkManagement infrastructu ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libgcc1 1:4.4.5-8GCC support library ii libkdecore5 4:4.4.5-2the KDE Platform Core Library ii libkdeui5 4:4.4.5-2the KDE Platform User Interface Li ii libkio5 4:4.4.5-2the Network-enabled File Managemen ii libkutils4 4:4.4.5-2various utility classes for the KD ii libplasma3 4:4.4.5-2the Plasma Library for the KDE Pla ii libqt4-dbus 4:4.6.3-4Qt 4 D-Bus module ii libqt4-network 4:4.6.3-4Qt 4 network module ii libqt4-svg 4:4.6.3-4Qt 4 SVG module ii libqt4-xml 4:4.6.3-4Qt 4 XML module ii libqtcore4 4:4.6.3-4Qt 4 core module ii libqtgui4 4:4.6.3-4Qt 4 GUI module ii libsolid4 4:4.4.5-2Solid Library for KDE Platform ii libsolidcontrol44:4.4.5-5library for Solid based network ma ii libstdc++6 4.4.5-8 The GNU Standard C++ Library v3 plasma-widget-networkmanagement recommends no packages. Versions of packages plasma-widget-networkmanagement suggests: ii kdebase-workspace-bin 4:4.4.5-5 core binaries for the KDE Plasma W -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607803: apt: popen/fclose mismatch in dpkgmp.cpp (log file descriptor)
Package: apt
Version: 0.8.10
Severity: minor
Tags: patch
Looking at
URL:http://qa.debian.org/daca/cppcheck/sid/apt_0.8.10.html, I saw
this error that should be easy to fix:
# ./apt-pkg/deb/dpkgpm.cc:1418 [error] - Mismatching allocation and
deallocation: log
# ./apt-pkg/deb/dpkgpm.cc:1434 [error] - Mismatching allocation and
deallocation: log
Looking at the source, the bug is obvious (popen() and fclose()), and
this fix solve the issue:
--- apt-pkg/deb/dpkgpm.cc.orig 2010-12-22 13:29:15.0 +0100
+++ apt-pkg/deb/dpkgpm.cc 2010-12-22 13:30:05.0 +0100
@@ -1415,7 +1415,7 @@
{
while( fgets(buf, sizeof(buf), log) != NULL)
fprintf(report, %s, buf);
-fclose(log);
+pclose(log);
}
}
@@ -1431,7 +1431,7 @@
{
while( fgets(buf, sizeof(buf), log) != NULL)
fprintf(report, %s, buf);
-fclose(log);
+pclose(log);
}
}
Happy hacking,
--
Petter Reinholdtsen
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607804: mirror submission for mirror.checkdomain.de
Package: mirrors Severity: wishlist Submission-Type: new Site: mirror.checkdomain.de Type: leaf Archive-architecture: amd64 i386 CDImage-ftp: /debian-cd/ CDImage-http: /debian-cd/ IPv6: no CDImage-upstream: ftp.halifax.rwth-aachen.de Updates: once Maintainer: Simon Jalandt s.jala...@checkdomain.de Country: DE Germany Location: Germany, near Regnsburg, Bavaria Sponsor: Checkdomain GmbH https://www.checkdomain.de Comment: Connection: 1Gbps -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607768: [INTL:it] Italian translation of the debconf templates syslinux
On Wed, Dec 22, 2010 at 08:25:09AM +0100, Daniel Baumann wrote: could you please fix the errors in it? Sorry, my mistake, the encoding has been changed by the email client. Here the same file encoded by mutt in UTF-8. It should be fine. Thanks -- GPG Key: 4096R/F2133176 2010-10-19 Enrico Rossi e.ro...@tecnobrain.com # Italian (it) translation of syslinux. # Copyright (C) 2010 Software in the Public Interest. # This file is distributed under the same license as the syslinux package. # Enrico Rossi e.ro...@tecnobrain.com, 2010. # msgid msgstr Project-Id-Version: syslinux 2:4.02+dfsg-7\n Report-Msgid-Bugs-To: sysli...@packages.debian.org\n POT-Creation-Date: 2010-07-04 21:11+0200\n PO-Revision-Date: 2010-11-24 15:42+0100\n Last-Translator: Enrico Rossi e.ro...@tecnobrain.com\n Language-Team: Italian t...@lists.linux.it\n Language: it\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: boolean #. Description #: ../extlinux.templates:1001 msgid Should EXTLINUX be installed to the MBR? msgstr Installare EXTLINUX nel MBR? #. Type: boolean #. Description #: ../extlinux.templates:1001 msgid If you choose this option, EXTLINUX will be automatically written to the MBR of your disk. The current MBR will be saved to a file in /boot. msgstr Selezionando questa opzione, EXTLINUX sarà scritto automaticamente nel MBR del disco. L'attuale MBR verrà salvato in un file in /boot. #. Type: boolean #. Description #: ../extlinux.templates:1001 msgid Otherwise, EXTLINUX can be manually setup as described in /usr/share/doc/ extlinux/README.Debian. msgstr Altrimenti, EXTLINUX può essere installato manualmente come descritto in /usr/share/doc/ extlinux/README.Debian. #. Type: boolean #. Description #: ../extlinux.templates:1001 msgid Note: The automatic installation currently only works if your root partition is on the disk to which MBR extlinux should be installed into. msgstr Nota: Attualmente l'installazione automatica funziona solo se la partizione di root è sullo stesso disco nel quale MBR extlinux dovrebbe essere installato.
Bug#607805: no reason not to build arch any
Package: python-greenlet Version: 0.3.1-1 Severity: important Tags: patch User: ubuntu-de...@lists.ubuntu.com Usertags: origin-ubuntu natty ubuntu-patch IMO there is no reason not to build for architecture `any'. Currently your are missing half of the architectures. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#600927: gdm3: mouse cursor remains a 'clock'
On 22/12/10 11:30, Josselin Mouette wrote: Le mardi 21 décembre 2010 à 19:58 +0100, Miklos Quartus a écrit : I experience the same problem after a clean install of Debian Squeeze from squeeze-di-beta2 i386 CD. Cursor remains a 'clock' in the login screen even after login-logout. I have no metacity. Otherwise no impact on overall behaviour of the system. Does removing the “X-GNOME-Autostart-Notify=true” line in /usr/share/gdm/autostart/LoginWindow/metacity.desktop help? In all cases I don’t think it’s a good idea to have gdm3 without metacity. Maybe it should be made a dependency. Not sure why, but at least with a mutter alternative I guess? I'm using gnome-shell now, though I still have metacity installed, so I'm not sure whether gdm would keep working if I removed it. Cheers, Emilio -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607806: dropbox reports libc.so.6.1 not found.
Package: dropbox Version: 1.0.10-1 Severity: important I installed dropbox on an up-to-date Debian unstable system. I do: dropbox help and see: Traceback (most recent call last): File __main__dropbox__.py, line 20, in module File client_api/dropbox_connection.py, line 16, in module File common_util/functions.py, line 30, in module File common_util/dirtraverse.py, line 295, in module File ctypes/__init__.py, line 431, in LoadLibrary File ctypes/__init__.py, line 348, in __init__ OSError: libc.so.6.1: cannot open shared object file: No such file or directory The same happens for whatever dropbox commands I try. -- System Information: Debian Release: 6.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.36-rc7+ (SMP w/2 CPU cores; PREEMPT) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages dropbox depends on: ii libatk1.0-0 1.30.0-1 The ATK accessibility toolkit ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libfontconfig12.8.0-2.1 generic font configuration library ii libgcc1 1:4.4.5-10 GCC support library ii libglib2.0-0 2.24.2-1 The GLib library of C routines ii libgtk2.0-0 2.20.1-2 The GTK+ graphical user interface ii libpango1.0-0 1.28.3-1 Layout and rendering of internatio ii libsm62:1.2.0-1 X11 Session Management library ii libx11-6 2:1.3.3-4 X11 client-side library ii libxcomposite11:0.4.3-1 X11 Composite extension library ii libxcursor1 1:1.1.11-1 X cursor management library ii libxdamage1 1:1.1.3-1 X11 damaged region extension libra ii libxext6 2:1.1.2-1 X11 miscellaneous extension librar ii libxfixes31:4.0.5-1 X11 miscellaneous 'fixes' extensio ii libxi62:1.3-6X11 Input extension library ii libxinerama1 2:1.1.1-1 X11 Xinerama extension library ii libxrandr22:1.3.1-1 X11 RandR extension library ii libxrender1 1:0.9.6-1 X Rendering Extension client libra dropbox recommends no packages. dropbox suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607807: python-greenlet-dbg doesn't contain the extension built for the -dbg interpreter
Package: python-greenlet Version: 0.3.1-1 Severity: normal User: ubuntu-de...@lists.ubuntu.com Usertags: origin-ubuntu natty The python-greenlet-dbg package doesn't contain the extension built for the -dbg interpreter. The -dbg package should contain the extension built for the -dbg interpreter too. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#599271: libtextcat: Should have homepage link in control file
severity 599271 wishlist thanks On Wed, Oct 06, 2010 at 12:05:29PM +0200, Petter Reinholdtsen wrote: Severity: minor How, please? is missing a link to the upstream project home page. Please add a Homepage: entry in the package control file pointing to URL: http://software.wise-guys.nl/libtextcat/ . Anyway, that should be possible, but given that the project is dead anyways Grüße/Regards, René -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607242: xserver-xorg-input-all: my mouse behaves strangely. I get dropping event due to full queue! in my X.org.log
In-line :- On Wed, Dec 22, 2010 at 16:25, Julien Viard de Galbert jul...@vdg.blogsite.org wrote: tags 607242 + moreinfo thanks On Wed, Dec 22, 2010 at 10:06:58AM +0100, Julien Viard de Galbert wrote: [...] I'm not an input expert, so I don't have much idea on that. For some reason (maybe the size it's more than 32k, which is huge for an email) your report did not make it to the debian-x mailing list, so maybe now that I'm replying an expert will see it ;) Thank you. Didn't understand the bit about 32kb thing. Do you mean I write a lot or did the font-size make the bug-report big. More clarity here would be good . Got an expert advice ;) Apparently dropping event due to full queue indicates that the kernel never sends EV_SYN for this device. The driver queue the button and motion events until it gets the sync, so with no sync, the queue gets full... You should install evtest, and launch it once your mouse start to behave wrong. (to find the device you have to give in parameter you can look at your Xorg.0.log, it was /dev/input/event5 in the log you sent. so launch # evtest /dev/input/event5 move your mouse a little, and send us the output. Thank you, already installed evtest and now waiting for the mouse to behave as it behaves :P , would try to send the data as and when it becomes possible. Would you say below is a good idea $evtest /dev/input/event5 mouse.txt Just wondering, because when that happens sometimes the desktop also freezes or some other things happen. I could go to VT1 (CTRL+TAB+1)and fire that up from there and let it do it work. Also after firing it up, when I'm sure the data is captured how do I make it stop, do I do a CTRL+C or some other keyboard combo so the data is safe and pristine. A better set of instructions would go a long way in helping me deliver the data that would be needed to pin-point what is wrong. I wanna be in a position to be able to generate the data, if desktop freezes or anything else, save that data, shutdown the system and restart and still the data is there. Then will send you. Because of the freakishness of the mouse, I'm not able to trust the GUI and the system as much as I would like. That would help understanding what's wrong. Yup. Thanks for your time, Lastly -- Julien Viard de Galbert jul...@vdg.blogsite.org http://silicone.homelinux.org/ jul...@silicone.homelinux.org Lastly, NC is my signature means non-commercial, I don't know why people think of non-commercial as non-free. I have seen many an art-work and literature under the non-free license and nobody raises an eyebrow. But as you said that's an entirely different matter so let it rest. :) -- Regards, Shirish Agarwal शिरीष अग्रवाल My quotes in this email licensed under CC 3.0 http://creativecommons.org/licenses/by-nc/3.0/ http://flossexperiences.wordpress.com 065C 6D79 A68C E7EA 52B3 8D70 950D 53FB 729A 8B17 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607808: (no subject)
Subject: installation-reports: installation completed without any problems Package: installation-reports Severity: normal Tags: d-i -- Package-specific info: Boot method: DVD Image version: http://cdimage.debian.org/cdimage/squeeze_di_beta2/amd64/iso-dvd/debian-squeeze-di-beta2-amd64-DVD-1.iso Dec 03 Date: Date and time of the install Machine: HP Pavilion dv5 laptop Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [ ] User/password setup:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=6.0 (squeeze) - installer build 20101127 X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == uname -a: Linux debian 2.6.32-5-amd64 #1 SMP Sat Oct 30 14:18:21 UTC 2010 x86_64 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:3603] lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:3603] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:3603] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:3603] lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:3603] lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:3603] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:3603] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:3603] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) lspci -knn: Subsystem: Hewlett-Packard
Bug#565549: 5.28/00 is out
Please package this version... http://root.cern.ch/drupal/content/production-release-52800 Yours, Gurkan -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#553047: libc6: (cross) libc-2.10.1.so/powerpc: ELF file data
Dnia czwartek, 28 października 2010 o 08:06:35 minami napisał(a): Shouldn't we stop tweaking LD_LIBRARY_PATH to cross-build gcc? In my understanding, the error message: error while loading shared libraries: /usr/powerpc-linux-gnu/lib/libc.so.6: ELF file data encoding not little-endian means: failed to load the Perl interpreter with $LD_LIBRARY_PATH/libc.so instead of /lib/libc.so. Yes, it means that. I solved that by adding /lib:/usr/lib: to LD_LIBRARY_PATH in attached patch. Fortunately, recent versions of dpkg-shlibdeps seems to be wise enough to detect GCC_TARGET and DEB_TARGET_GNU_TYPE and we no longer have to tell dh_shlibdeps where to search libraries using a special environment variable. Would be nice. Anyway with attached patch I managed to package biarch powerpc and triarch mipsel gcc-4.5. Please take a look. Regards, -- JID: h...@jabber.org Website: http://marcin.juszkiewicz.com.pl/ LinkedIn: http://www.linkedin.com/in/marcinjuszkiewicz From 765b884759007e961f53a296183a1bddb9a07ee8 Mon Sep 17 00:00:00 2001 From: Marcin Juszkiewicz marcin.juszkiew...@linaro.org Date: Wed, 22 Dec 2010 14:08:41 +0100 Subject: [PATCH] Fix biarch/triarch cross builds. There were two problems: 1. dpkg-shlibdeps failed to find libraries for 64 or n32 builds 2. LD_LIBRARY_PATH lacked host dirs so when 1st problem got fixed it was not working. --- debian/rules.d/binary-fortran.mk|8 debian/rules.d/binary-libgcc.mk |2 +- debian/rules.d/binary-libgomp.mk|8 debian/rules.d/binary-libmudflap.mk |9 - debian/rules.d/binary-libobjc.mk| 10 +- debian/rules.d/binary-libstdcxx.mk | 10 +- debian/rules2 |2 +- 7 files changed, 24 insertions(+), 25 deletions(-) diff --git a/debian/rules.d/binary-fortran.mk b/debian/rules.d/binary-fortran.mk index cfed225..ee089ae 100644 --- a/debian/rules.d/binary-fortran.mk +++ b/debian/rules.d/binary-fortran.mk @@ -56,8 +56,8 @@ define __do_fortran mv $(install_stamp) $(install_stamp)-tmp rm -rf $(d_l) $(d_d) - dh_installdirs -p$(p_l) $(2) - DH_COMPAT=2 dh_movefiles -p$(p_l) $(2)/libgfortran.so.* + dh_installdirs -p$(p_l) $(usr_lib$(2)) + DH_COMPAT=2 dh_movefiles -p$(p_l) $(usr_lib$(2))/libgfortran.so.* debian/dh_doclink -p$(p_l) $(p_base) debian/dh_doclink -p$(p_d) $(p_base) @@ -67,7 +67,7 @@ define __do_fortran dh_fixperms -p$(p_l) -p$(p_d) dh_makeshlibs -p$(p_l) $(call cross_mangle_shlibs,$(p_l)) - $(cross_shlibdeps) dh_shlibdeps -p$(p_l) + DIRNAME=$(subst n,,$(2)) $(cross_shlibdeps) dh_shlibdeps -p$(p_l) $(call cross_mangle_substvars,$(p_l)) dh_gencontrol -p$(p_l) -p$(p_d) \ -- -v$(DEB_VERSION) $(common_substvars) @@ -79,7 +79,7 @@ define __do_fortran trap '' 1 2 3 15; touch $@; mv $(install_stamp)-tmp $(install_stamp) endef -do_fortran = $(call __do_fortran,lib$(1)gfortran$(FORTRAN_SONAME),$(usr_lib$(1))) +do_fortran = $(call __do_fortran,lib$(1)gfortran$(FORTRAN_SONAME),$(1)) define do_fortran_dev dh_installdirs -p$(2) $(gcc_lib_dir$(1)) diff --git a/debian/rules.d/binary-libgcc.mk b/debian/rules.d/binary-libgcc.mk index b45a4b4..ba1039f 100644 --- a/debian/rules.d/binary-libgcc.mk +++ b/debian/rules.d/binary-libgcc.mk @@ -64,7 +64,7 @@ define __do_libgcc ) ) - $(cross_shlibdeps) dh_shlibdeps -p$(p_l) + DIRNAME=$(subst n,,$(2)) $(cross_shlibdeps) dh_shlibdeps -p$(p_l) $(call cross_mangle_substvars,$(p_l)) dh_compress -p$(p_l) -p$(p_d) diff --git a/debian/rules.d/binary-libgomp.mk b/debian/rules.d/binary-libgomp.mk index 736b681..c18313b 100644 --- a/debian/rules.d/binary-libgomp.mk +++ b/debian/rules.d/binary-libgomp.mk @@ -15,8 +15,8 @@ define __do_gomp mv $(install_stamp) $(install_stamp)-tmp rm -rf $(d_l) $(d_d) - dh_installdirs -p$(p_l) $(2) - DH_COMPAT=2 dh_movefiles -p$(p_l) $(2)/libgomp.so.* + dh_installdirs -p$(p_l) $(usr_lib$(2)) + DH_COMPAT=2 dh_movefiles -p$(p_l) $(usr_lib$(2))/libgomp.so.* debian/dh_doclink -p$(p_l) $(p_base) debian/dh_doclink -p$(p_d) $(p_base) @@ -26,7 +26,7 @@ define __do_gomp dh_fixperms -p$(p_l) -p$(p_d) dh_makeshlibs -p$(p_l) $(call cross_mangle_shlibs,$(p_l)) - $(cross_shlibdeps) dh_shlibdeps -p$(p_l) + DIRNAME=$(subst n,,$(2)) $(cross_shlibdeps) dh_shlibdeps -p$(p_l) $(call cross_mangle_substvars,$(p_l)) dh_gencontrol -p$(p_l) -p$(p_d) \ -- -v$(DEB_VERSION) $(common_substvars) @@ -40,7 +40,7 @@ endef # -- -do_gomp = $(call __do_gomp,lib$(1)gomp$(GOMP_SONAME),$(usr_lib$(1))) +do_gomp = $(call __do_gomp,lib$(1)gomp$(GOMP_SONAME),$(1)) $(binary_stamp)-libgomp: $(install_stamp) $(call do_gomp,) diff --git a/debian/rules.d/binary-libmudflap.mk b/debian/rules.d/binary-libmudflap.mk index e35ae5c..ff89781 100644 --- a/debian/rules.d/binary-libmudflap.mk +++ b/debian/rules.d/binary-libmudflap.mk @@ -24,9 +24,8 @@ define __do_mudflap mv $(install_stamp)
Bug#606808: Security analysis
I've just committed your patch to echoping and it seems to work but I wonder why it was reported as a security risk. I do not immediately see why. signature.asc Description: Digital signature
Bug#606115: Cannot symlink file if two geeqie instances are running
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Hi Dne Sun, 05 Dec 2010 12:58:13 +0100 Joachim Breitner nome...@debian.org napsal(a): I noticed that the File → Create symbolic link menu entry does not work from a second instance of geeqie, started while another is already running. It seems that geeqie starts a helper which tries to talk to the running instance and then talks to the wrong one. Indeed the helper uses geeqie remote mode, filed upstream bug for that: https://sourceforge.net/tracker/index.php?func=detailaid=3141680group_id=222125atid=1054680 - -- Michal Čihař | http://cihar.com | http://blog.cihar.com -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.15 (GNU/Linux) iQIcBAEBCAAGBQJNEf5xAAoJEGo39bHX+xdNyCQP/2QKjJ5uUPiSz03M6h8//M5u 2NWEiQaMIjRfTJC5pJ5i4Q8Q/Uw0/Js43h4quDJXC8wwmQDWmLicsGVolhqfkTgr 1svAPbHJYbA+RkvmM2SfPHaRFFRXRnR9AVrj+V+C1CQx/AxGA6oH3IqS5DznED2z 5FnNmv29FC+ETCYo6PNvk4EE0U9wy/KjRGnS6hnQz+4C+B2LEfVRcTBxpbJ6Ao/d 4CIOGV5PxvGsojYAXwzhstmh/5w7Z1A5gQIw7C4/ZZOMbkT6b9ywcZGsvt6mzY3a qWrvnq4m9U0xKqdpoznrzevLSmK9gjiEfrSlk8JxHmJL9zNhvbBxb3NQQMAt/ou1 5F9PQSMK0F1GIEvGZ3nBKEVSgYZh7+WtviWtv2z6DrhPJ8FP16DF+5A3XbmZUbFU hWwzjuraHaKE0f2U9JlxPbXfGyFKGAYxckIFa0iL+RlBYblAdfNsWqW2MpSuhIYI dHZYtu/+46EIHTWs8l5CXa3N6YxfGFwBPCPpWywT/m8bBMKrdG8NLu2LKhQb4kwn 2D8nEAix4gs0j75tYmkW3p8MHEojtMLE616J90taAgUqBdukO8oBiNWrGcTVnsJb LnOduoGP4R9qZOrWT0jVn8aULrA0/ybI3Wq+mzNSbtl5G+tUkrcV1UnOFxNz+Txf e4vybJw+Rro22KdNr0O5 =V3JC -END PGP SIGNATURE-
Bug#607390: Can libtextcat0 depend on not only libtextcat-data but also libtextcat-data-utf8?
On Tue, 21 Dec 2010 22:45:32 +0100 Rene Engelhard r...@debian.org wrote: No. The normal libtextcat afaik can't handle utf8 encoded things, the -utf8 one also works with OOos patched version (and that's the sole reason this package exists). Okay, thanks for clarifying. -- Regards, Hideki Yamane henrich @ debian.or.jp/org http://wiki.debian.org/HidekiYamane -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607810: important: zabbix-frontend-php would like to install mysql instead pgsql
Package: zabbix-frontend-php Version: 1:1.8.2-1squeeze1 Severity: Important Hello i would like to install zabbix-server-pgsql and zabbix-frontend-php apt-get install zabbix-server-pgsql all works fine apt-get install zabbix-frontend-php zabbix-agent Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig Die folgenden zusätzlichen Pakete werden installiert: apache2 apache2-mpm-prefork apache2-utils apache2.2-bin apache2.2-common javascript-common libapache2-mod-php5 libapr1 libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap libgd2-xpm libjpeg62 libjs-prototype libjs-scriptaculous libmysqlclient16 libonig2 libpng12-0 libqdbm14 libt1-5 mysql-common php5 php5-cli php5-common php5-gd php5-mysql php5-suhosin wwwconfig-common Vorgeschlagene Pakete: apache2-doc apache2-suexec apache2-suexec-custom php-pear libgd-tools mysql-client apache apache-ssl Die folgenden NEUEN Pakete werden installiert: apache2 apache2-mpm-prefork apache2-utils apache2.2-bin apache2.2-common javascript-common libapache2-mod-php5 libapr1 libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap libgd2-xpm libjpeg62 libjs-prototype libjs-scriptaculous libmysqlclient16 libonig2 libpng12-0 libqdbm14 libt1-5 mysql-common php5 php5-cli php5-common php5-gd php5-mysql php5-suhosin wwwconfig-common zabbix-agent zabbix-frontend-php 0 aktualisiert, 30 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen noch 0 B von 13,4 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 38,6 MB Plattenplatz zusätzlich benutzt. why he wants to install mysql-common??? I´ve installed postgresql Sorry for my bad english and for the newbie-report ;) Cheers -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607364: linux-image-2.6.32-trunk-686: High resource consumption for note(net)books
Tested. With kernel from experimental (2.6.37-rc5) my netbook gets crazy: hibernate disable my swap at next reboot (then I need use mkswap manually, and then swapon -a) and don't works. And in some reboots fsck needs recover something in my root partition. Anyway, the numbers (activations/second) sounds better in this version. After upgrade of firmware-linux and linux-base packages (needed by the new kernel), my hibernate option do not worked anymore even at old kernel (2.6.32). Then I back them to testing versions and needed manual intervention to fix the hibernate problem (installing and configuring uswsusp). Due to the version problems, I got the last stable version (2.6.36.2) and compiled. The numbers with powertop sounds better too (maybe better than 2.6.37 version, but I need test more time). I will test for some hours and put here some more info. 2010/12/19 maximilian attems m...@stro.at On Sun, Dec 19, 2010 at 03:51:42PM -0200, Saulo Soares de Toledo wrote: Upgraded. The problem continues. What more info you need? Check if newer linux-2.6 images fix it (you find them in experimental) 2.6.37-rcX if yes which patch makes the diff and if not tell upstream on bugzilla.kernel.org
Bug#607811: Fix FTBFS with ld --as-needed
Package: ptop Version: 3.6.2-3 Severity: normal Tags: patch User: ubuntu-de...@lists.ubuntu.com Usertags: origin-ubuntu natty ubuntu-patch User: debian-...@lists.debian.org Usertags: ld-as-needed fix build failure with ld --as-needed, patch at: http://launchpadlibrarian.net/61075580/ptop_3.6.2-3_3.6.2-3ubuntu1.diff.gz more info at http://wiki.debian.org/ToolChain/DSOLinking -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#584942: Bug#583738: Bug#584942: by the way
But it still chokes on anything in color: D [22/Dec/2010:15:24:09 +0100] [Job 1700] sfopen: gs_parse_file_name failed. D [22/Dec/2010:15:24:09 +0100] [Job 1700] sfopen: gs_parse_file_name failed. D [22/Dec/2010:15:24:09 +0100] [Job 1700] ./base/gsicc_manage.c:709: gsicc_open_search(): Could not find lab.icc D [22/Dec/2010:15:24:09 +0100] [Job 1700] | ./psi/zusparam.c:805: set_lab_icc(): cannot find default lab icc profile D [22/Dec/2010:15:24:09 +0100] [Job 1700] sfopen: gs_parse_file_name failed. D [22/Dec/2010:15:24:09 +0100] [Job 1700] sfopen: gs_parse_file_name failed. D [22/Dec/2010:15:24:09 +0100] [Job 1700] sfopen: gs_parse_file_name failed. D [22/Dec/2010:15:24:09 +0100] [Job 1700] ./base/gsicc_manage.c:709: gsicc_open_search(): Could not find %rom%iccprofiles/default_rgb.icc D [22/Dec/2010:15:24:09 +0100] [Job 1700] | ./base/gsicc_manage.c:869: gsicc_set_device_profile(): cannot find device profile D [22/Dec/2010:15:24:09 +0100] [Job 1700] Unrecoverable error: unknownerror in .setdistillerparams D [22/Dec/2010:15:24:09 +0100] [Job 1700] Operand stack: D [22/Dec/2010:15:24:09 +0100] [Job 1700] --nostringval-- --nostringval-- --nostringval-- --nostringval-- false --nostringval-- GrayAC SImageDict --nostringval-- GrayImageDepth -1 OffOptimizations 0 .AlwaysEmbed --nostringval-- SubsetFonts true CalGrayProfile None ColorACSImageDict --nostringval-- DownsampleGrayImages false UCRandBGInfo Preserve LockDistillerParams false PDFXSetBleedBoxToMedi aBox true AutoFilterColorImages true ColorImageFilter DCTEncode EmbedAllFonts true EncodeMonoImages true MonoImageFilter CCITTFax Encode CalCMYKProfile None DownsampleColorImages false PreserveOverprintSettings true ImageMemory 524288 PDFXTrimBoxToMediaBoxOffse t --nostringval-- ASCII85EncodePages false UsePrologue false ColorImageDownsampleThreshold 1.5 DoThumbnails false EncodeGrayImages true MonoImageDownsampleThreshold 1.5 sRGBProfile None CannotEmbedFontPolicy Warning DetectBlends true PreserveOPIComments true GrayImageFilter DCTEncode ParseDSCCommentsForDocInfo true AntiAliasMonoImage D [22/Dec/2010:15:24:09 +0100] [Job 1700] s false UseFlateCompression true ColorImageDict --nostringval-- CreateJobTicket false EncodeColorImages true MonoImageDict --nostringval-- PreserveHalftoneInfo false Binding Left DefaultRenderingIntent Default PreserveEPSInfo true GrayImageDownsampleThreshold 1.5 ParseDSCComments true AntiAliasGrayImages false ColorImageDepth -1 EmitDSCWarnings false MonoImageDepth -1 PreserveCopyPage true AutoPositionEPSFiles true AutoRotatePages PageByPage ConvertImagesToIndexed true .NeverEmbed --nostringval-- GrayImageDict --nostringval-- Optimize false OPM 1 AntiAliasColorImages false TransferFunctionInfo Preserve CalRGBProfile None ColorConversionStrategy LeaveColorUnchanged DownsampleMonoImages false MaxSubsetPct 100 PDFXBleedBoxToTrimBoxOffset --nostringval-- AutoFilterGrayImages true CompressPages true D [22/Dec/2010:15:24:09 +0100] [Job 1700] sfopen: gs_parse_file_name failed. D [22/Dec/2010:15:24:09 +0100] [Job 1700] sfopen: gs_parse_file_name failed. D [22/Dec/2010:15:24:09 +0100] [Job 1700] ./base/gsicc_manage.c:709: gsicc_open_search(): Could not find lab.icc D [22/Dec/2010:15:24:09 +0100] cupsdReadClient: 17 GET /images/right.gif HTTP/1.1 D [22/Dec/2010:15:24:09 +0100] cupsdAuthorize: No authentication data provided. D [22/Dec/2010:15:24:09 +0100] [Job 1700] | ./psi/zusparam.c:805: set_lab_icc(): cannot find default lab icc profile I [22/Dec/2010:15:24:09 +0100] [Job 1700] Rendering completed ii ghostscript 9.00~dfsg-2~0jones1 The GPL Ghostscript PostScript/PDF interpreter Peter -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607673: gnucash: Left arrow, right arrow and backspace keys don't work in register
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 severity 607673 important tags 607673 - moreinfo help thanks Hi Shannon, Am 21.12.2010 20:01, schrieb Shannon Dealy: Your idea that it was SCIM related was correct, however, it wasn't the patch that is the problem. I tried rebuilding and installing gnucash as you suggested without the 10_fix_broken_SCIM_input_bug_587298 patch and it had no effect. Good to hear, then it is at least no regression (caused by this patch). However, I do run with SCIM installed (for use with other programs), and terminating it allowed both versions of gnucash to start working correctly (with and without the above patch). Then, we have a workaround. Hence I don't believe anymore that this bug is release critical, so I am lowering the severity again. Restart the background daemon and gnucash immediately stops working correctly. So the problem would appear to be SCIM related, but (not knowing the internals of gnucash), I do find it puzzling that the problem only affects transaction editing (register and scheduled transactions), but not any other dialogs that I have tried. I would have expected that all keyboard input to the program would behave the same. I think we should re-check the issue with latest stable upstream version Gnucash 2.4.0, which has been released some days ago. I hope I get around to craft some experimental packages for this release soon... Regards, Micha -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk0SCgIACgkQWN0/4pnhQbRGbwCfWTTsT8/nzkOSG2GDR0uj9Kpr YmkAn0NwVUkv2eU9rLnU1qhkTk7Qoxev =loVn -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607793: linux-image-2.6.26-2-686: scsi related kernel panic in 686 during boot, works in 486
On Wed, 2010-12-22 at 11:12 +0200, Ilan Tayari wrote: Package: linux-2.6 Version: 2.6.26-26lenny1 Severity: normal I've recently installed Lenny on an old HP NetServer E60 machine. The installer worked perfectly, but after the reboot I got a kernel panic with flashing keyboard lights. A search lead me to bug 486168, which seems very similar (same hardware, same panic message). The comments there suggest using rescue mode to install a 486 kernel and boot it. I did that, and the system now works, but the 486 kernel recognizes just one CPU and not both. (I'm not sure if this is a limitation of the 486 kernel or not) That's correct, it is a limitation of the 486 kernel. A late comment in bug 486168 suggests disabling the memory hole in the BIOS settings. I checked the BIOS settings on my machine and the memory hole is disabled, yet the kernel panic still happens. I'd like to load the 686 kernel for increased performance, and possibly to take advantage of SMP. -- Package-specific info: ** Kernel log: boot messages should be attached Can't make it save the boot messages to a file, so uploaded as YouTube video at: http://www.youtube.com/watch?v=0ahFTUIY4ZY I hope the quality is enough. crash it around 00:22 [...] The key messages are clear: [5.812886] ahc_pci:0:5:0: Using left over BIOS settings ... [ 21.396440] Kernel panic - not syncing: HOST_MSG_LOOP with invalid SCB ff The panic is generated by the driver code used for various Adaptec SCSI adapters. I think that this error would normally indicate a fault in the SCSI adapter and the driver should not panic, but that may not be easy to avoid. However, since the 486 kernel works, the fault is clearly in software. Could you test the 686 kernel with the added kernel parameter 'maxcpus=1'? Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse. signature.asc Description: This is a digitally signed message part
Bug#607812: gedit: fails to use tab preference when loading file
Package: gedit Version: 2.30.4-1 Severity: normal I chose a tab setting preference of 2 instead of the default 8. This works for documents currently loaded in gedit, but if I subsequently load a document with tabs in, the tab setting is back at 8 (for that file only), I have to then go back and reset the preference. -- Package-specific info: Active plugins: - time - docinfo - modelines - spell - filebrowser - codecomment - bracketcompletion - sort No plugin installed in $HOME. Module versions: - glib 2.24.2 - gtk+ 2.20.1 - gtksourceview - pygobject - pygtk - pygtksourceview 2.10.1 - enchant - iso-codes 3.23 Python module versions: - python2.6.6 - pygtk 2.17.0 (GTK+ 2.20.1) -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores) Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gedit depends on: ii gconf22.28.1-6 GNOME configuration database syste ii gedit-common 2.30.4-1 official text editor of the GNOME ii iso-codes 3.23-1 ISO language, territory, currency, ii libatk1.0-0 1.30.0-1 The ATK accessibility toolkit ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libcairo2 1.8.10-6 The Cairo 2D vector graphics libra ii libenchant1c2a1.6.0-1a wrapper library for various spel ii libgconf2-4 2.28.1-6 GNOME configuration database syste ii libglib2.0-0 2.24.2-1 The GLib library of C routines ii libgtk2.0-0 2.20.1-2 The GTK+ graphical user interface ii libgtksourceview2.0-0 2.10.4-1 shared libraries for the GTK+ synt ii libice6 2:1.0.6-2 X11 Inter-Client Exchange library ii libpango1.0-0 1.28.3-1 Layout and rendering of internatio ii libpython2.6 2.6.6-6Shared Python runtime library (ver ii libsm62:1.1.1-1 X11 Session Management library ii libx11-6 2:1.3.3-4 X11 client-side library ii libxml2 2.7.8.dfsg-1 GNOME XML library ii python2.6.6-3+squeeze2 interactive high-level object-orie ii python-gobject2.21.4+is.2.21.3-1 Python bindings for the GObject li ii python-gtk2 2.17.0-4 Python bindings for the GTK+ widge ii python-gtksourceview2 2.10.1-1 Python bindings for the GtkSourceV ii python-support1.0.10 automated rebuilding support for P Versions of packages gedit recommends: ii python-gnome2 2.28.1-1 Python bindings for the GNOME desk ii zenity2.30.0-1 Display graphical dialog boxes fro gedit suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607813: arecord: can't record from usb mic
Package: alsa-utils Version: 1.0.23-3 Severity: important I was trying to test recording a simple wav file with my usb microphone, but arecord just fails: (this didn't happen when I was running lenny) $ arecord -f cd -D hw:2,0 -d 20 test.wav Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo arecord: set_params:1059: Channels count non available $ cat /proc/asound/cards 0 [IXP]: ATIIXP - ATI IXP ATI IXP rev 2 with Cx20468-31 at 0xc0003400, irq 17 1 [Modem ]: ATIIXP-MODEM - ATI IXP Modem ATI IXP Modem rev 2 at 0xc0003800, irq 17 2 [U0x46d0x991]: USB-Audio - USB Device 0x46d:0x991 USB Device 0x46d:0x991 at usb-:00:13.2-1, high speed $ arecord --list-devices List of CAPTURE Hardware Devices card 0: IXP [ATI IXP], device 0: ATI IXP AC97 [ATI IXP AC97] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Modem [ATI IXP Modem], device 0: ATI IXP MC97 [ATI IXP MC97] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: U0x46d0x991 [USB Device 0x46d:0x991], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages alsa-utils depends on: ii libasound21.0.23-2.1 shared library for ALSA applicatio ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libncursesw5 5.7+20100313-4 shared libraries for terminal hand ii linux-sound-base 1.0.23+dfsg-2 base package for ALSA and OSS soun ii lsb-base 3.2-23.1 Linux Standard Base 3.2 init scrip ii module-init-tools 3.12-1 tools for managing Linux kernel mo ii udev 164-3 /dev/ and hotplug management daemo ii whiptail 0.52.11-1 Displays user-friendly dialog boxe Versions of packages alsa-utils recommends: ii alsa-base 1.0.23+dfsg-2 ALSA driver configuration files ii pciutils 1:3.1.7-6 Linux PCI Utilities alsa-utils suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#582021: linux-image-2.6.32-bpo.4-xen-amd64 misses networking booting domUs installed via xen-tools
I wonder if this is simply down to the Lenny kernel having netfront built static and the Squeeze backport kernel has it built as a module. Perhaps combined with some failure to autoload the module for some reason (bug in module-init-tools, something about the domU filesystem configuration etc). To confirm please add xen-netfront to /etc/modules inside the guest. Thanks, Ian. -- Ian Campbell Current Noise: Annihilator - The Other Side Did you hear that two rabbits escaped from the zoo and so far they have only recaptured 116 of them? -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607768: [INTL:it] Italian translation of the debconf templates syslinux
On 12/22/2010 01:33 PM, Enrico Rossi wrote: Sorry, my mistake, the encoding has been changed by the email client. Here the same file encoded by mutt in UTF-8. It should be fine. thanks, i'll check later today, apply and upload. -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: daniel.baum...@progress-technologies.net Internet: http://people.progress-technologies.net/~daniel.baumann/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607427: opensc: diff for NMU version 0.11.13-1.1
Dear maintainer,
I've prepared an NMU for opensc (versioned as 0.11.13-1.1) and
uploaded it immediately, given the security concern and urgency.
The diff is attached to this message. I have subscribed to the
package in the PTS in case of problems or any further action
required, but please don't hesitate to mail me.
Regards.
--
Jonathan Wiltshire j...@debian.org
Debian Developer http://people.debian.org/~jmw
4096R: 0xD3524C51 / 0A55 B7C5 1223 3942 86EC 74C3 5394 479D D352 4C51
diff -Nru opensc-0.11.13/debian/changelog opensc-0.11.13/debian/changelog
--- opensc-0.11.13/debian/changelog 2010-03-01 05:58:15.0 +
+++ opensc-0.11.13/debian/changelog 2010-12-22 14:21:46.0 +
@@ -1,3 +1,11 @@
+opensc (0.11.13-1.1) unstable; urgency=high
+
+ * Non-maintainer upload.
+ * CVE-2010-4523: Protect against buffer overflow from rogue cards
+(closes: #607427)
+
+ -- Jonathan Wiltshire j...@debian.org Wed, 22 Dec 2010 14:20:22 +
+
opensc (0.11.13-1) unstable; urgency=low
* New upstream release. (Closes: #570107, #505404)
diff -Nru opensc-0.11.13/debian/patches/CVE-2010-4523 opensc-0.11.13/debian/patches/CVE-2010-4523
--- opensc-0.11.13/debian/patches/CVE-2010-4523 1970-01-01 01:00:00.0 +0100
+++ opensc-0.11.13/debian/patches/CVE-2010-4523 2010-12-22 14:20:00.0 +
@@ -0,0 +1,46 @@
+Description: protect against possible buffer overflows from rogue cards
+ (CVE-2010-4523)
+Origin: https://www.opensc-project.org/opensc/changeset/4913
+Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=607427
+Forwarded: not-needed
+Last-Update: 2010-12-22
+
+--- opensc-0.11.13.orig/src/libopensc/card-acos5.c
opensc-0.11.13/src/libopensc/card-acos5.c
+@@ -140,8 +140,8 @@
+ /*
+ * Cache serial number.
+ */
+- memcpy(card-serialnr.value, apdu.resp, apdu.resplen);
+- card-serialnr.len = apdu.resplen;
++ memcpy(card-serialnr.value, apdu.resp, MIN(apdu.resplen, SC_MAX_SERIALNR));
++ card-serialnr.len = MIN(apdu.resplen, SC_MAX_SERIALNR);
+
+ /*
+ * Copy and return serial number.
+--- opensc-0.11.13.orig/src/libopensc/card-atrust-acos.c
opensc-0.11.13/src/libopensc/card-atrust-acos.c
+@@ -853,8 +853,8 @@
+ if (apdu.sw1 != 0x90 || apdu.sw2 != 0x00)
+ return SC_ERROR_INTERNAL;
+ /* cache serial number */
+- memcpy(card-serialnr.value, apdu.resp, apdu.resplen);
+- card-serialnr.len = apdu.resplen;
++ memcpy(card-serialnr.value, apdu.resp, MIN(apdu.resplen, SC_MAX_SERIALNR));
++ card-serialnr.len = MIN(apdu.resplen, SC_MAX_SERIALNR);
+ /* copy and return serial number */
+ memcpy(serial, card-serialnr, sizeof(*serial));
+ return SC_SUCCESS;
+--- opensc-0.11.13.orig/src/libopensc/card-starcos.c
opensc-0.11.13/src/libopensc/card-starcos.c
+@@ -1289,8 +1289,8 @@
+ if (apdu.sw1 != 0x90 || apdu.sw2 != 0x00)
+ return SC_ERROR_INTERNAL;
+ /* cache serial number */
+- memcpy(card-serialnr.value, apdu.resp, apdu.resplen);
+- card-serialnr.len = apdu.resplen;
++ memcpy(card-serialnr.value, apdu.resp, MIN(apdu.resplen, SC_MAX_SERIALNR));
++ card-serialnr.len = MIN(apdu.resplen, SC_MAX_SERIALNR);
+ /* copy and return serial number */
+ memcpy(serial, card-serialnr, sizeof(*serial));
+ return SC_SUCCESS;
diff -Nru opensc-0.11.13/debian/patches/min-max-macros opensc-0.11.13/debian/patches/min-max-macros
--- opensc-0.11.13/debian/patches/min-max-macros 1970-01-01 01:00:00.0 +0100
+++ opensc-0.11.13/debian/patches/min-max-macros 2010-12-22 14:40:49.0 +
@@ -0,0 +1,38 @@
+Description: move MIN/MAX macros from muscle.c to internal.h (needed for
+ patch CVE-2010-4523)
+Origin: https://www.opensc-project.org/opensc/changeset/4912
+Forwarded: not-needed
+Last-Update: 2010-12-22
+
+--- opensc-0.11.13.orig/src/libopensc/internal.h
opensc-0.11.13/src/libopensc/internal.h
+@@ -50,6 +50,13 @@
+ #define sleep(t) Sleep((t) * 1000)
+ #endif
+
++#ifndef MAX
++#define MAX(x, y) (((x) (y)) ? (x) : (y))
++#endif
++#ifndef MIN
++#define MIN(x, y) (((x) (y)) ? (x) : (y))
++#endif
++
+ struct sc_atr_table {
+ /* The atr fields are required to
+ * be in aa:bb:cc hex format. */
+--- opensc-0.11.13.orig/src/libopensc/muscle.c
opensc-0.11.13/src/libopensc/muscle.c
+@@ -28,13 +28,6 @@
+ #define MSC_DSA_PUBLIC 0x04
+ #define MSC_DSA_PRIVATE 0x05
+
+-#ifndef MAX
+-#define MAX(x, y) (((x) (y)) ? (x) : (y))
+-#endif
+-#ifndef MIN
+-#define MIN(x, y) (((x) (y)) ? (x) : (y))
+-#endif
+-
+ static msc_id inputId = { { 0xFF, 0xFF, 0xFF, 0xFF } };
+ static msc_id outputId = { { 0xFF, 0xFF, 0xFF, 0xFE } };
+
diff -Nru opensc-0.11.13/debian/patches/series opensc-0.11.13/debian/patches/series
--- opensc-0.11.13/debian/patches/series 2010-03-01 06:06:15.0 +
+++ opensc-0.11.13/debian/patches/series 2010-12-22 14:38:40.0 +
@@ -1 +1,3 @@
+min-max-macros
+CVE-2010-4523
debian-changes
signature.asc
Description: Digital signature
Bug#607242: xserver-xorg-input-all: my mouse behaves strangely. I get dropping event due to full queue! in my X.org.log
On Wed, Dec 22, 2010 at 06:50:25PM +0530, shirish शिरीष wrote: In-line :- On Wed, Dec 22, 2010 at 16:25, Julien Viard de Galbert jul...@vdg.blogsite.org wrote: tags 607242 + moreinfo thanks On Wed, Dec 22, 2010 at 10:06:58AM +0100, Julien Viard de Galbert wrote: [...] I'm not an input expert, so I don't have much idea on that. For some reason (maybe the size it's more than 32k, which is huge for an email) your report did not make it to the debian-x mailing list, so maybe now that I'm replying an expert will see it ;) Thank you. Didn't understand the bit about 32kb thing. Do you mean I write a lot or did the font-size make the bug-report big. More clarity here would be good . It's mainly the size of the Xorg.0.log file, you could have removed a few of the repeated lines at the end. Got an expert advice ;) Apparently dropping event due to full queue indicates that the kernel never sends EV_SYN for this device. The driver queue the button and motion events until it gets the sync, so with no sync, the queue gets full... You should install evtest, and launch it once your mouse start to behave wrong. (to find the device you have to give in parameter you can look at your Xorg.0.log, it was /dev/input/event5 in the log you sent. so launch # evtest /dev/input/event5 move your mouse a little, and send us the output. Thank you, already installed evtest and now waiting for the mouse to behave as it behaves :P , would try to send the data as and when it becomes possible. Would you say below is a good idea $evtest /dev/input/event5 mouse.txt Just wondering, because when that happens sometimes the desktop also freezes or some other things happen. I could go to VT1 (CTRL+TAB+1)and fire that up from there and let it do it work. Also after firing it up, when I'm sure the data is captured how do I make it stop, do I do a CTRL+C or some other keyboard combo so the data is safe and pristine. A better set of instructions would go a long way in helping me deliver the data that would be needed to pin-point what is wrong. I wanna be in a position to be able to generate the data, if desktop freezes or anything else, save that data, shutdown the system and restart and still the data is there. Then will send you. Because of the freakishness of the mouse, I'm not able to trust the GUI and the system as much as I would like. Yes, launching evtest form a VT should do it. but then you're going to have a huge file were all the firsts lines will be normal, basically what we are trying to find is if the EV_SYN event is still send. This event is displayed as -- Report Sync so you should probably cut the file and remove the middle part where the sync events look normal. That would help understanding what's wrong. Yup. Thanks for your time, Lastly -- Julien Viard de Galbert jul...@vdg.blogsite.org http://silicone.homelinux.org/ jul...@silicone.homelinux.org Lastly, NC is my signature means non-commercial, I don't know why people think of non-commercial as non-free. I have seen many an art-work and literature under the non-free license and nobody raises an eyebrow. But as you said that's an entirely different matter so let it rest. :) Just because non-commercial is a restriction, so it's non-free with regards to debian criteria at least, and some other agrees with that ;) But of course you are perfectly free to use it for your signature :) -- Julien Viard de Galbertjul...@vdg.blogsite.org http://silicone.homelinux.org/ jul...@silicone.homelinux.org GPG Key ID: D00E52B6 Published on: hkp://keys.gnupg.net Key Fingerprint: E312 A31D BEC3 74CC C49E 6D69 8B30 6538 D00E 52B6 signature.asc Description: Digital signature
Bug#607814: cgroup-bin: cgred init script sources wrong defaults file
Package: cgroup-bin Version: 0.37-1 Severity: normal /etc/init.d/cgred sources /etc/default/cgred.conf but the package installs /etc/default/cgred ... -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable'), (700, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages cgroup-bin depends on: ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libcgroup10.37-1 A library to control and monitor c cgroup-bin recommends no packages. cgroup-bin suggests no packages. -- Configuration Files: /etc/cgconfig.conf changed [not included] -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#602246: ITP: brian -- simulator for spiking neural networks
oops -- sorry for the delay -- just found this comment and then what to do if we have not decided yet what particular humanoid will accomplish the mission? On Wed, 03 Nov 2010, Raphael Hertzog wrote: Package: wnpp Severity: wishlist Owner: NeuroDebian Team deb...@onerussian.com Please use your real name even if you're doing some work as part of a team... -- =--= Keep in touch www.onerussian.com Yaroslav Halchenko www.ohloh.net/accounts/yarikoptic -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607242: xserver-xorg-input-all: my mouse behaves strangely. I get dropping event due to full queue! in my X.org.log
In-line :- On Wed, Dec 22, 2010 at 20:33, Julien Viard de Galbert jul...@vdg.blogsite.org wrote: snipped Yes, launching evtest form a VT should do it. but then you're going to have a huge file were all the firsts lines will be normal, basically what we are trying to find is if the EV_SYN event is still send. This event is displayed as -- Report Sync so you should probably cut the file and remove the middle part where the sync events look normal. That would help understanding what's wrong. wish I had known this an hour ago. My mother was playing solitaire and the mouse started acting strange. I did the $ sudo evtest /dev/input/event5 and there was lots of stuff on stdout i.e. terminal. I'm guessing that's gone now, right. In fact the whole desktop had freezed sort of and the mouse was being crazy. What I had to do later is to use htop and kill solitaire and then could finally get back control of the desktop. I will get it now for sure in few hours and atleast know whether the mouse is responsible for these things or its just an effect of something else. Thank you for your help. I would not be really aware which part of the file would be good or not to you so will send it to you in its entirety as a reply to the bug-report and if that fails put it up on rapidshare or whatever upload site is available/convenient to you. snipped -- Julien Viard de Galbert jul...@vdg.blogsite.org http://silicone.homelinux.org/ jul...@silicone.homelinux.org GPG Key ID: D00E52B6 Published on: hkp://keys.gnupg.net Key Fingerprint: E312 A31D BEC3 74CC C49E 6D69 8B30 6538 D00E 52B6 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) iQIcBAEBCAAGBQJNEhNOAAoJEIswZTjQDlK2pjYQAMBPLbPZ4qMcw5BZdIkPWkq7 AW/Bl4gy4wX30z0IXn5njGRhqbzEb1k++zJfiKAlwi0to9aXNYOGNJiO6FI6o/B0 KLP036urnnKtYWoVTJiSMTWUAmYTM2DvO+7zGAPIlBy6T5yfkRiRQG0R5laJkvSz adR0BVtuhY7+18GeqkvndUdEuBvrV0CqLvmvzN5ZsOKBMuPVfnDNrXc909D6y17Z ouZhG6cGjmoGJq3cDVGaWHf9Q9ik7fVRZbqKLMptqsU2+lV0MaAp8lp5MTZ8M5nw 6no2GO8x6kEBBUglWm34cs9pUOAaZVVj9NmqPwSK8NonyMl2gC7wtgV3fMbveMWJ 6PNBfu35mf7IWuTPaE96gMQjkjfRKkd8VEb4IqfUhpxfnLUVFpjgcQu2Z4GQRUm5 Vqsn10hMwPdD/4TT+4QPBW1HvvGrkwlUFezUm8ciIwUU9WiuXSXVfcVa0H2U3OmH s0Hn2+pMVI2zkmC8laD4jHmV72aZQx+EahEREbnz19PFGYyXLZcUE8h/zzxJ+Dc6 4klgCkcxRl2MH86Ku9NuIKMVHOAo71X494jOgVLbdDP8sOrjZXXiblty8LJxUQFy E+qrsenMCuooN/ps0F2HDshuQ1k/9FGdOzpRln3i4ZZMFGgLCRuUnXbhMm2CQLm4 akefGW4xyLftUlBdbQQg =P2Pv -END PGP SIGNATURE- -- Regards, Shirish Agarwal शिरीष अग्रवाल My quotes in this email licensed under CC 3.0 http://creativecommons.org/licenses/by-nc/3.0/ http://flossexperiences.wordpress.com 065C 6D79 A68C E7EA 52B3 8D70 950D 53FB 729A 8B17 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607815: ITP: libapp-rad-perl -- Perl module for rapid and easy creation of command line applications
Package: wnpp Owner: Salvatore Bonaccorso car...@debian.org Severity: wishlist X-Debbugs-CC: debian-de...@lists.debian.org,debian-p...@lists.debian.org * Package name: libapp-rad-perl Version : 1.04 Upstream Author : Breno G. de Oliveira garu at cpan.org * URL : http://search.cpan.org/dist/App-Rad/ * License : Artistic or GPL-1+ Programming Lang: Perl Description : Perl module for rapid and easy creation of command line applications App::Rad aims to be a simple yet powerful framework for developing your command-line applications. It can easily transform your Perl one-liners into reusable subroutines than can be called directly by the user of your program. It also tries to provide a handy interface for your common command-line tasks. If you have a feature request to easen out your tasks even more, please drop me an email or a RT feature request. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#602246: ITP: brian -- simulator for spiking neural networks
Hi, On Wed, 22 Dec 2010, Yaroslav Halchenko wrote: oops -- sorry for the delay -- just found this comment and then what to do if we have not decided yet what particular humanoid will accomplish the mission? It doesn't matter much. You can always change the submitter afterwards. If you have no volunteer to do the work, it could be argued that you should first file a RFP and change it into an ITP once you know who will do the work. Cheers, -- Raphaël Hertzog ◈ Debian Developer Follow my Debian News ▶ http://RaphaelHertzog.com (English) ▶ http://RaphaelHertzog.fr (Français) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607427: [SRM] Proposed stable update for opensc (maybe nmu; fixes CVE-2010-4523)
This patch has come from two upstream commits to fix the CVE and the
debdiff for an nmu is attached. If it's ok with you, I'll go ahead with if
the maintainer hasn't already done so in a day or so.
jmm has confirmed there will be no DSA for it.
Thanks,
--
Jonathan Wiltshire j...@debian.org
Debian Developer http://people.debian.org/~jmw
4096R: 0xD3524C51 / 0A55 B7C5 1223 3942 86EC 74C3 5394 479D D352 4C51
diff -u opensc-0.11.4/debian/changelog opensc-0.11.4/debian/changelog
--- opensc-0.11.4/debian/changelog
+++ opensc-0.11.4/debian/changelog
@@ -1,3 +1,11 @@
+opensc (0.11.4-5+lenny1.1) stable; urgency=high
+
+ * Non-maintainer upload.
+ * CVE-2010-4523: Protect against buffer overflow from rogue cards
+(closes: #607427)
+
+ -- Jonathan Wiltshire j...@debian.org Wed, 22 Dec 2010 15:32:16 +
+
opensc (0.11.4-5+lenny1) stable-security; urgency=critical
* src/pkcs15init/asepcos.profile, src/pkcs15init/cardos.profile,
only in patch2:
unchanged:
--- opensc-0.11.4.orig/src/libopensc/card-starcos.c
+++ opensc-0.11.4/src/libopensc/card-starcos.c
@@ -1289,8 +1289,8 @@
if (apdu.sw1 != 0x90 || apdu.sw2 != 0x00)
return SC_ERROR_INTERNAL;
/* cache serial number */
- memcpy(card-serialnr.value, apdu.resp, apdu.resplen);
- card-serialnr.len = apdu.resplen;
+ memcpy(card-serialnr.value, apdu.resp, MIN(apdu.resplen,
SC_MAX_SERIALNR));
+ card-serialnr.len = MIN(apdu.resplen, SC_MAX_SERIALNR);
/* copy and return serial number */
memcpy(serial, card-serialnr, sizeof(*serial));
return SC_SUCCESS;
only in patch2:
unchanged:
--- opensc-0.11.4.orig/src/libopensc/muscle.c
+++ opensc-0.11.4/src/libopensc/muscle.c
@@ -28,13 +28,6 @@
#define MSC_DSA_PUBLIC 0x04
#define MSC_DSA_PRIVATE0x05
-#ifndef MAX
-#define MAX(x, y) (((x) (y)) ? (x) : (y))
-#endif
-#ifndef MIN
-#define MIN(x, y) (((x) (y)) ? (x) : (y))
-#endif
-
static msc_id inputId = { { 0xFF, 0xFF, 0xFF, 0xFF } };
static msc_id outputId = { { 0xFF, 0xFF, 0xFF, 0xFE } };
only in patch2:
unchanged:
--- opensc-0.11.4.orig/src/libopensc/card-acos5.c
+++ opensc-0.11.4/src/libopensc/card-acos5.c
@@ -140,8 +140,8 @@
/*
* Cache serial number.
*/
- memcpy(card-serialnr.value, apdu.resp, apdu.resplen);
- card-serialnr.len = apdu.resplen;
+ memcpy(card-serialnr.value, apdu.resp, MIN(apdu.resplen,
SC_MAX_SERIALNR));
+ card-serialnr.len = MIN(apdu.resplen, SC_MAX_SERIALNR);
/*
* Copy and return serial number.
only in patch2:
unchanged:
--- opensc-0.11.4.orig/src/libopensc/internal.h
+++ opensc-0.11.4/src/libopensc/internal.h
@@ -47,6 +47,13 @@
#define sleep(t) Sleep((t) * 1000)
#endif
+#ifndef MAX
+#define MAX(x, y) (((x) (y)) ? (x) : (y))
+#endif
+#ifndef MIN
+#define MIN(x, y) (((x) (y)) ? (x) : (y))
+#endif
+
struct sc_atr_table {
/* The atr fields are required to
* be in aa:bb:cc hex format. */
only in patch2:
unchanged:
--- opensc-0.11.4.orig/src/libopensc/card-atrust-acos.c
+++ opensc-0.11.4/src/libopensc/card-atrust-acos.c
@@ -833,8 +833,8 @@
if (apdu.sw1 != 0x90 || apdu.sw2 != 0x00)
return SC_ERROR_INTERNAL;
/* cache serial number */
- memcpy(card-serialnr.value, apdu.resp, apdu.resplen);
- card-serialnr.len = apdu.resplen;
+ memcpy(card-serialnr.value, apdu.resp, MIN(apdu.resplen,
SC_MAX_SERIALNR));
+ card-serialnr.len = MIN(apdu.resplen, SC_MAX_SERIALNR);
/* copy and return serial number */
memcpy(serial, card-serialnr, sizeof(*serial));
return SC_SUCCESS;
signature.asc
Description: Digital signature
Bug#607310: Acknowledgement (gramps: fails to start; gtk.Hbox has not attribute 'set_alignment')
On 12/16/2010 04:51 PM, Debian Bug Tracking System wrote: Thank you for filing a new Bug report with Debian. This is an automatically generated reply to let you know your message has been received. Your message is being forwarded to the package maintainers and other interested parties for their attention; they will reply in due course. Your message has been sent to the package maintainer(s): tre...@debian.org (James A. Treacy) If you wish to submit further information on this problem, please send it to 607...@bugs.debian.org. Please do not send mail to ow...@bugs.debian.org unless you wish to report a problem with the Bug-tracking system. Based on the manpage for sources.list (with the most preferred source listed first), I actually believed that the order of lines in /etc/apt/sources.list mattered, and since I had unstable listed first, I thought my system was running unstable for the most part. But a post on debian-user triggered a thought which sent me on a tangent, which led me to the page at http://osdir.com/ml/linux.conectiva.apt-rpm/2003-11/msg00043.html which said (among other things): ...no matter what's in apt.conf.d, placed there by packages or whatever. Sources.list currently behaves exactly the opposite vs sources.list.d - I think the rule of least surprise should be followed here, instead of trying to change all documentation and brainwash users to forget about /etc/apt/sources.list :) So I tinkered around in /etc/apt/apt.conf.d, and found the local file, which had: we...@westek:/etc/apt/apt.conf.d$ cat local APT::Default-Release lenny; APT::Install-Recommends 0; APT::Install-Suggests 0; I changed lenny to unstable, ran aptitude update and aptitude install gramps, and now gramps works. Dare I do a dist-upgrade now? Yep, think I'm gonna try it. This bug can now be closed. Thanks! -- Kent West*))) http://kentwest.blogspot.com Praise Yah! \o/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607816: cgroup-bin: cgred init script uses signal number 12
Package: cgroup-bin Version: 0.37-1 Severity: normal /etc/init.d/cgred runs kill -s 12 ... Signal 12 is SIGUSR2 on x86 and some others but appears to be SIGSYS on alpha, sparc and mips[0]. This might lead to trouble on those architectures... [0] signal(7) -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable'), (700, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages cgroup-bin depends on: ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libcgroup10.37-1 A library to control and monitor c cgroup-bin recommends no packages. cgroup-bin suggests no packages. -- Configuration Files: /etc/cgconfig.conf changed [not included] -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607817: xmobar: request to enable --with_inotify build option
Package: xmobar Version: 0.11.1-1 Severity: wishlist I sent the maintainer an email about this and then realized I should have used BTS instead! Sorry to be a bother :) One of the features I really like in xmobar is the optional Mail plugin. If you haven't used it, its very handy, and uses inotify (via the Haskell hinotify package) to show you message counts on Maildir folders. I thought I'd check with you to see if its possible to add that feature to the build, by adding the --with_inotify flag. To help, I've made a debian package of hinotify and have been getting assistance from the Debian HaskellGroup to get it packaged. I think its just about ready to be uploaded. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xmobar depends on: ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libffi5 3.0.9-3Foreign Function Interface library ii libgmp3c2 2:4.3.2+dfsg-1 Multiprecision arithmetic library ii libx11-6 2:1.3.3-4 X11 client-side library ii libxext6 2:1.1.2-1 X11 miscellaneous extension librar ii libxft2 2.1.14-2 FreeType-based font drawing librar ii libxinerama1 2:1.1-3X11 Xinerama extension library Versions of packages xmobar recommends: ii curl 7.21.0-1 Get a file from an HTTP, HTTPS or Versions of packages xmobar suggests: ii xmonad0.9.1-2+b1 A lightweight X11 window manager -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607815: ITP: libapp-rad-perl -- Perl module for rapid and easy creation of command line applications
Hi On Wed, Dec 22, 2010 at 04:23:46PM +0100, Salvatore Bonaccorso wrote: App::Rad aims to be a simple yet powerful framework for developing your command-line applications. It can easily transform your Perl one-liners into reusable subroutines than can be called directly by the user of your program. It also tries to provide a handy interface for your common command-line tasks. If you have a feature request to easen out your tasks even more, please drop me an email or a RT feature request. The long description clearly need a bit an adjustment. This was simply text extracted from the module itself. Bests Salvatore signature.asc Description: Digital signature
Bug#607818: icedtea6-plugin: does not register itself as iceweasel-javaplugin.so alternative
Package: icedtea6-plugin Version: 6b18-1.8.3-2 Severity: normal Tags: d-i sid Hello, As the title says : after a fresh installation of icedtea6-plugin, it has not shown up with update-alternative --config iceweasel-javaplugin.so (nor has it automatically replaced the installed sun-java6-plugin). Work(ed)around by adding icedtea6-plugin as alternative using galternative. Best regards, Alexandre -- System Information: Debian Release: 6.0 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=fr_CH.UTF-8, LC_CTYPE=fr_CH.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages icedtea6-plugin depends on: ii libatk1.0-0 1.30.0-1 The ATK accessibility toolkit ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libcairo2 1.8.10-6 The Cairo 2D vector graphics libra ii libfontconfig1 2.8.0-2.1generic font configuration library ii libfreetype62.4.2-2.1FreeType 2 font engine, shared lib ii libgcc1 1:4.4.5-10 GCC support library ii libglib2.0-02.24.2-1 The GLib library of C routines ii libgtk2.0-0 2.20.1-2 The GTK+ graphical user interface ii libnspr4-0d 4.8.6-1 NetScape Portable Runtime Library ii libpango1.0-0 1.28.3-1 Layout and rendering of internatio ii libstdc++6 4.4.5-10 The GNU Standard C++ Library v3 ii openjdk-6-jre 6b18-1.8.3-2 OpenJDK Java runtime, using Hotspo ii xulrunner-1.9.1 1.9.1.16-1 XUL + XPCOM application runner icedtea6-plugin recommends no packages. icedtea6-plugin suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607793: linux-image-2.6.26-2-686: scsi related kernel panic in 686 during boot, works in 486
Ben, thank you very much for your time and effort. On 22.12.2010 16:35, Ben Hutchings wrote: The key messages are clear: [5.812886] ahc_pci:0:5:0: Using left over BIOS settings ... [ 21.396440] Kernel panic - not syncing: HOST_MSG_LOOP with invalid SCB ff The panic is generated by the driver code used for various Adaptec SCSI adapters. I think that this error would normally indicate a fault in the SCSI adapter and the driver should not panic, but that may not be easy to avoid. However, since the 486 kernel works, the fault is clearly in software. I figured as much, thanks for the clarification. Could you test the 686 kernel with the added kernel parameter 'maxcpus=1'? Well I'll be... :) I added maxcpus=1 and the 686 kernel loaded fine. What can I do next? Is there any chance to fix or work around this so that I can get dual-cpu support? Ilan. [0.00] Initializing cgroup subsys cpuset [0.00] Initializing cgroup subsys cpu [0.00] Linux version 2.6.26-2-686 (Debian 2.6.26-26lenny1) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Nov 25 01:53:57 UTC 2010 [0.00] BIOS-provided physical RAM map: [0.00] BIOS-e820: - 0009f800 (usable) [0.00] BIOS-e820: 0009f800 - 000a (reserved) [0.00] BIOS-e820: 000eac00 - 0010 (reserved) [0.00] BIOS-e820: 0010 - 0fff (usable) [0.00] BIOS-e820: 0fff - 0c00 (ACPI data) [0.00] BIOS-e820: 0c00 - 1000 (ACPI NVS) [0.00] BIOS-e820: fec0 - fec1 (reserved) [0.00] BIOS-e820: fee0 - fee01000 (reserved) [0.00] BIOS-e820: fffeac00 - 0001 (reserved) [0.00] 0MB HIGHMEM available. [0.00] 255MB LOWMEM available. [0.00] found SMP MP-table at [c00f6e40] 000f6e40 [0.00] Entering add_active_range(0, 0, 65520) 0 entries of 256 used [0.00] Zone PFN ranges: [0.00] DMA 0 - 4096 [0.00] Normal 4096 -65520 [0.00] HighMem 65520 -65520 [0.00] Movable zone start PFN for each node [0.00] early_node_map[1] active PFN ranges [0.00] 0:0 -65520 [0.00] On node 0 totalpages: 65520 [0.00] DMA zone: 32 pages used for memmap [0.00] DMA zone: 0 pages reserved [0.00] DMA zone: 4064 pages, LIFO batch:0 [0.00] Normal zone: 480 pages used for memmap [0.00] Normal zone: 60944 pages, LIFO batch:15 [0.00] HighMem zone: 0 pages used for memmap [0.00] Movable zone: 0 pages used for memmap [0.00] DMI 2.2 present. [0.00] ACPI: RSDP 000F6E20, 0014 (r0 PTLTD ) [0.00] ACPI: RSDT 0FFFD313, 0030 (r1 PTLTDRSDT 1 LTP 0) [0.00] ACPI: FACP 0B09, 0074 (r1 HP E 602 PTL F4240) [0.00] ACPI: DSDT 0FFFD343, 27C6 (r1 HP E 600 MSFT 10B) [0.00] ACPI: FACS 0FC0, 0040 [0.00] ACPI: APIC 0B7D, 005C (r1 PTLTDAPIC 0 LTP 0) [0.00] ACPI: BOOT 0BD9, 0027 (r1 PTLTD $SBFTBL$0 LTP 1) [0.00] ACPI: PM-Timer IO Port: 0x8008 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled) [0.00] WARNING: maxcpus limit of 1 reached. Processor ignored. [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] IOAPIC[0]: apic_id 2, version 17, address 0xfec0, GSI 0-23 [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 high level) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] Enabling APIC mode: Flat. Using 1 I/O APICs [0.00] Using ACPI (MADT) for SMP configuration information [0.00] Allocating PCI resources starting at 2000 (gap: 1000:eec0) [0.00] PM: Registered nosave memory: 0009f000 - 000a [0.00] PM: Registered nosave memory: 000a - 000eb000 [0.00] PM: Registered nosave memory: 000eb000 - 0010 [0.00] SMP: Allowing 1 CPUs, 0 hotplug CPUs [0.00] PERCPU: Allocating 37992 bytes of per cpu data [0.00] NR_CPUS: 8, nr_cpu_ids: 2 [0.00] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65008 [0.00] Kernel command line: root=/dev/md0 ro maxcpus=1 [0.00] mapped APIC to b000 (fee0) [0.00] mapped IOAPIC to a000 (fec0) [0.00] Enabling fast FPU save and restore... done. [0.00]
Bug#607819: broken shlibs
Package: libneon27-gnutls Version: 0.29.5-2 Severity: serious Tags: sid $ cat /var/lib/dpkg/info/libneon27-gnutls.shlibs libneon-gnutls 27 libneon27-gnutls \ (= 0.29.3-3) which reaks dpkg-shlibdeps (sorry, german): dpkg-shlibdeps: Warnung: Abhängigkeit libneon27-gnutls \ kann nicht ausgewertet werden No idea whether the other flavours are also affected... Regards, Rene -- System Information: Debian Release: 6.0 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libneon27-gnutls depends on: ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libcomerr2 1.41.12-2common error description library ii libgnutls26 2.8.6-1 the GNU TLS library - runtime libr ii libgssapi-krb5-21.8.3+dfsg-4 MIT Kerberos runtime libraries - k ii libk5crypto31.8.3+dfsg-4 MIT Kerberos runtime libraries - C ii libkrb5-3 1.8.3+dfsg-4 MIT Kerberos runtime libraries ii libxml2 2.7.8.dfsg-1 GNOME XML library ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime Versions of packages libneon27-gnutls recommends: ii ca-certificates20090814+nmu2 Common CA certificates libneon27-gnutls suggests no packages. -- no debconf information Grüße/Regards, Rene -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607820: postgrey: The URL output in the greylist text isn't complete
Package: postgrey Version: 1.31-3.2 Severity: normal When an address gets greylisted, the URL to the info page doesn't contain the host of the recipient. Here is an exampel: Sender address rejected: Greylisted, see http://postgrey.schweikert.ch/help/.html I've not changed any content in the init-scripts, I've onlye added several hosts to the whitelist_clients-file. -- System Information: Debian Release: 5.0.7 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/1 CPU core) Locale: LANG=en_DK.ISO-8859-15, LC_CTYPE=en_DK.ISO-8859-15 (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash Versions of packages postgrey depends on: ii adduser 3.110 add and remove users and groups ii libberkeleydb-perl 0.34-1+b1 use Berkeley DB 4 databases from P ii libnet-dns-perl 0.63-2 Perform DNS queries from a Perl sc ii libnet-server-perl 0.97-1 An extensible, general perl server ii perl 5.10.0-19lenny2 Larry Wall's Practical Extraction ii ucf 3.0016 Update Configuration File: preserv Versions of packages postgrey recommends: ii libdigest-sha1-perl 2.11-2+b1 NIST SHA-1 message digest algorith ii libnet-rblclient-perl 0.5-2 Queries multiple Realtime Blackhol ii libparse-syslog-perl 1.10-1 Perl module for parsing syslog ent ii postfix 2.5.5-1.1 High-performance mail transport ag postgrey suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607762: dbus-glib: requires higher versioned build-dep on glib
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On Tue, 21 Dec 2010 at 13:22:09 -0800, Andres Salomon wrote: It would appear that I'd hit the following in configure.ac: PKG_CHECK_MODULES(DBUS_GLIB, gobject-2.0 = 2.24, have_glib=yes, have_glib=no) On Wed, 22 Dec 2010 at 02:15:57 +, Jonathan Wiltshire wrote: I've prepared an NMU for dbus-glib (versioned as 0.88-2.1) and uploaded it to DELAYED/7. Please feel free to tell me if I should delay it longer. I'm not sure that FTBFS on a non-target distribution version really deserves serious severity, but it's a bug, the patch looks fine, and I've applied it to pkg-utopia git. Feel free to convert your DELAYED upload into a normal-speed upload. I believe the necessary rune is something like: dcut ftp-master reschedule dbus-glib_0.88-2.1_amd64.changes 0-day Thanks, Simon -BEGIN PGP SIGNATURE- iQIVAwUBTRIid03o/ypjx8yQAQjAig/+Nu7AYHQm+QFoYLwWF8/+f+HAq3dNIhs4 oFTYE46XSstrkR2Kdk9THwWbi+ngph1sz3fAelMgQV6sUTuwEscO4eZTOnJjqqzH F6ZQcD7iss1BEgXxInXcarL2rdo8FTFyV8i/xXGBneTskuOxp2uXZmPHo36v4zPJ 9DcnmHlQ3UxktMMANo2n5HDYsfzrHKbFq3AEa9vcBVnIbjZfuHGObBm9KWRwF0bW nZdIWclvrn5Rh37OBGtxK+G6rRtW1H9DmhcmDYaFEwcYdsHe5XfCnziXgVvQnQTs LGyAweWIsmldfaQi8Ftju9wwm3sQ/6wtVzt/ilnvlKkSyO0YbOYhHRIxbWc8QsjJ 3tkMjS6b/vuWxGa1ErQJVYxjhJtdT4sL7yzwkNGGbg+x+y33UpbiMWKaD++x43JT SORq/hLTGXYDysq0G27cigWM+lZEPiT2507j/m4aGdS9CrV8iOzieQonaM+v6O28 kI6KrpJp7FqqhVLQhsDFFdOyICnMWM5nqky7+Cnjd1fd5mvM3fTeud25H3JdnKVf euDBJjUCFLxP+btIat0inokARAalh77fnimVMPoVlSqVvk08ZFjInGQ5jRRk/Ewy u6MebT7f+KH8Jb/bH+5/iZtpHHpn8slTpLraP3SeiT0spbP4b5F9ypGzGILoXIcO roC0HaQSIos= =g1XQ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#603620: php-apc: More crashes (squeeze)
Package: php-apc Version: 3.1.3p1-2 Followup-For: Bug #603620 I'm also seeing many segfaults with squeeze; the backtraces look like this: (gdb) bt #0 _zval_ptr_dtor (zval_ptr=0xc9a370) at /tmp/buildd/php5-5.3.3/Zend/zend.h:385 #1 0x7f8e890c3a28 in zend_hash_clean (ht=0x25276b8) at /tmp/buildd/php5-5.3.3/Zend/zend_hash.c:753 #2 0x7f8e86f2616b in apc_free_class_entry_after_execution () from /usr/lib/php5/20090626/apc.so #3 0x7f8e86f28bd4 in apc_request_shutdown () from /usr/lib/php5/20090626/apc.so #4 0x7f8e86f1f935 in ?? () from /usr/lib/php5/20090626/apc.so #5 0x7f8e890b861c in module_registry_cleanup (module=0xc9a370) at /tmp/buildd/php5-5.3.3/Zend/zend_API.c:2150 #6 0x7f8e890c35c4 in zend_hash_reverse_apply (ht=0x7f8e897b49c0, apply_func=0x7f8e890b8600 module_registry_cleanup) at /tmp/buildd/php5-5.3.3/Zend/zend_hash.c:957 #7 0x7f8e890b708d in zend_deactivate_modules () at /tmp/buildd/php5-5.3.3/Zend/zend.c:938 #8 0x7f8e89062bd5 in php_request_shutdown (dummy=0xc9a370) at /tmp/buildd/php5-5.3.3/main/main.c:1623 #9 0x7f8e89143ed7 in php_handler (r=0x7f8e89143ed7) at /tmp/buildd/php5-5.3.3/sapi/apache2handler/sapi_apache2.c:526 #10 0x00438f73 in ap_run_handler () #11 0x0043c53f in ap_invoke_handler () #12 0x0044970e in ap_process_request () #13 0x00446838 in ?? () #14 0x00440493 in ap_run_process_connection () #15 0x0044dd10 in ?? () #16 0x0044e064 in ?? () #17 0x0044e60c in ap_mpm_run () #18 0x00425be5 in main () -- System Information: Debian Release: 5.0.7 APT prefers stable APT policy: (700, 'stable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages php-apc depends on: ii libapache2-mod-php5 [phpapi-2 5.3.3-6server-side, HTML-embedded scripti ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii php5-cgi [phpapi-20090626]5.3.3-6server-side, HTML-embedded scripti ii php5-cli [phpapi-20090626]5.3.3-6command-line interpreter for the p php-apc recommends no packages. Versions of packages php-apc suggests: ii php5-gd 5.3.3-6GD module for php5 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607821: ITP: haskell-strptime -- Haskell binding for strptime with some extra features
Package: wnpp Severity: wishlist Owner: Eugene Kirpichov ekirpic...@gmail.com X-Debbugs-Cc: debian-de...@lists.debian.org * Package name: haskell-strptime Version : 0.1.8 Upstream Author : Eugene Kirpichov ekirpic...@gmail.com * URL : http://hackage.haskell.org/package/strptime * License : New BSD License Programming Lang: Haskell, C Description : Haskell binding for strptime with some extra features A Haskell binding for strptime with some extra features - namely, %OS is for fractional seconds and %^[+-][N]s is for seconds since epoch - for example, %^-3s is milliseconds since epoch. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#332838: Same Issue in links 2.1
Package: links Version: 2.1pre37-1.1 --- I could reproduce the bug with this later version of links as well. --- I have created a simple HTML file (quote.html) with quotes: htmlhead/headbody qThis is a quote/q /body/html The quotation marks can be seen in other browsers, but links (running links quote.html in shell) does not display them. --- I was running Debian 5.0.7 (lenny) with Linux Kernel 2.6.26-2-686. Versions of the packages are: sh-3.2$ dpkg -l | egrep 'links|libc6|libgpm2|libssl0.9.8|zlib1g' ii libc62.7-18lenny6 GNU C Library: Shared libraries ii libc6-dev2.7-18lenny6 GNU C Library: Development Libraries and Hea ii libc6-i686 2.7-18lenny6 GNU C Library: Shared libraries [i686 optimi ii libgpm2 1.20.4-3.1 General Purpose Mouse - shared library ii libssl0.9.8 0.9.8g-15+lenny9 SSL shared libraries ii links2.1pre37-1.1 Web browser running in text mode ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime --- Aras Ergus -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607819: broken shlibs
Hi, On Wed, Dec 22, 2010 at 04:58:33PM +0100, Rene Engelhard wrote: $ cat /var/lib/dpkg/info/libneon27-gnutls.shlibs libneon-gnutls 27 libneon27-gnutls \ (= 0.29.3-3) which reaks dpkg-shlibdeps (sorry, german): dpkg-shlibdeps: Warnung: Abhängigkeit libneon27-gnutls \ kann nicht ausgewertet werden No idea whether the other flavours are also affected... Doesn't look so: debian/rules: [...] dh_makeshlibs -p$(package) -V'$(package) (= $(shlibs-version))' dh_makeshlibs -p$(package)-gnutls -V'$(package)-gnutls \ (= $(shlibs-version))' [...] only -gnutls has that continuation. Grüße/Regards, Rene -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607640: nslcd: Allow tilde (~) in group names and user names
On Mon, 2010-12-20 at 15:05 +0100, Raphaël Hertzog wrote: nslcd refuses to return group names which contain a tilde. It does this on the basis that it's not part of the portable filename character set: http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_276 I would argue that it's not really nslcd's job to validate what's in the directory and that it's up to the user to decide whether he cares about the portability of his user/group names. The check is currently used for two things: - filtering data returned from LDAP (mostly to check if reasonable data is returned and to avoid confusion over group members that are specified as DN) - filtering requests from applications that will be translated into LDAP searches Since user and group information is rather sensitive (incorrect data can have security consequences) I would prefer to have strict-as-reasonable checks for users and groups to avoid surprises. A lot of applications make (incorrect) assumptions on user names and can behave strangely if they are different than expected. Also, since nslcd is often indirectly accessible from outside the machine (think http://host/~user requests, SSH probes or u...@host emails) some care is in order. In that regard things can be improved further in nslcd (e.g. checks that returned full names or home directories are not random binary data). You have already added exceptions by allowing $ and I would like to ask you to add another exception for ~. Since ~ is used by shells (and other applications) to expand user names to user home directories I think it will be confusing to allow it as a first character, but for other places I don't see a problem. Is that a problem for your configuration? But you should probably revisit the problem as a whole. Good programming principles is to be tolerant in what you read but be strict in what you send. By that I mean that it's not really nslcd's job to impose supplementary restrictions that are not needed. Or at least those restrictions should be configurable so that they can be disabled. In principle, I agree. The issue at hand is however that data that appears to be invalid should not be passed along since there may be security implications. Perhaps it is a good idea to rework the username (and groupname) check and make the check itself be configurable (perhaps using a regexp in the configuration file). Patches for this are most welcome ;) Anyway, thanks for bringing this up. -- -- arthur - adej...@debian.org - http://people.debian.org/~adejong -- signature.asc Description: This is a digitally signed message part
Bug#398208: Same Issue in links 2.1
I could reproduce this issue with a later version of links as well. --- I have created sample HTML files with the characters you have mentioned, in ISO-8859 for Umlauts and in UTF-8 for other characters. I opened the files with links filename, and got the same output with you. --- I was running Debian 5.0.7 (lenny) with Linux Kernel 2.6.26-2-686. Versions of the packages were: sh-3.2$ dpkg -l | egrep 'links|libc6|libgpm2|libssl0.9.8|zlib1g' ii libc62.7-18lenny6 GNU C Library: Shared libraries ii libc6-dev 2.7-18lenny6 GNU C Library: Development Libraries and Hea ii libc6-i686 2.7-18lenny6 GNU C Library: Shared libraries [i686 optimi ii libgpm2 1.20.4-3.1 General Purpose Mouse - shared library ii libssl0.9.80.9.8g-15+lenny9 SSLshared libraries ii links2.1pre37-1.1 Web browser running in text mode ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime --- Aras Ergus -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#607756: Acknowledgement (xserver-xorg-video-ati: Resolution1152x768 does not work on Rage Mobility M3 AGP 2x (rev 02))
The bug report can be closed. I made a mistake in the xorg.conf file. 1152x768 resolution is working now with the ati driver. xorg.conf: Section Device Identifier ATI Technologies, Inc. Rage Mobility M3 (AGP) Driver ati BusID PCI:0:16:0 Option UseFBDev false Option SWcursor true Option ForcePCIMode true Option XAANoOffscreenPixmaps Option NoInt10 true EndSection Section Monitor Identifier Standardbildschirm Option DPMS HorizSync 30-100 VertRefresh 50-160 # 1152x768 59.78 Hz (CVT) hsync: 47.71 kHz; pclk: 71.75 MHz Modeline 1152x768_60.00 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync Option PreferredMode 1152x768_60.00 EndSection Section Screen Identifier Default Screen Device ATI Technologies, Inc. Rage Mobility M3 (AGP) Monitor Standardbildschirm DefaultDepth24 SubSection Display Depth 1 Modes 1152x768_60.00 1024x768 896x600 720x480 EndSubSection SubSection Display Depth 4 Modes 1152x768_60.00 1024x768 896x600 720x480 EndSubSection SubSection Display Depth 8 Modes 1152x768_60.00 1024x768 896x600 720x480 EndSubSection SubSection Display Depth 15 Modes 1152x768_60.00 1024x768 896x600 720x480 EndSubSection SubSection Display Depth 16 Modes 1152x768_60.00 1024x768 896x600 720x480 EndSubSection SubSection Display Depth 24 Modes 1152x768_60.00 1024x768 896x600 720x480 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen Default Screen EndSection log file: X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.26-2-powerpc64 ppc Debian Current Operating System: Linux debian 2.6.32-5-powerpc #1 Fri Dec 10 16:30:49 UTC 2010 ppc Kernel command line: root=/p...@f200/mac...@17/at...@1f000/d...@0:5 root=/dev/hda5 ro Build Date: 02 December 2010 01:48:29AM xorg-server 2:1.7.7-10 (Julien Cristau jcris...@debian.org) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Wed Dec 22 17:52:55 2010 (==) Using config file: /etc/X11/xorg.conf (==) Using system config directory /usr/share/X11/xorg.conf.d (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Standardbildschirm (**) | |--Device ATI Technologies, Inc. Rage Mobility M3 (AGP) (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to /usr/lib/xorg/modules (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x101e8180 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 8 (--) PCI:*(0:0:16:0) 1002:4c46:1002:4c46 ATI Technologies Inc Rage Mobility M3 AGP 2x rev 2, Mem @ 0xb400/67108864, 0xb000/16384, I/O @ 0x0400/256, BIOS @ 0x/131072 (II) LoadModule: extmod (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor=X.Org Foundation compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension
Bug#607822: iceweasel: Can't add add-ons
Package: iceweasel
Version: 3.5.16-1
Severity: normal
If you try to add any new add-ons you're invited to restart IceWeasel, you
hit the button and Iceweasel shutsdown, but it doesn't restart.
When you do back to the Add-on menu you're told to Restart Iceweasel to
compelete your changes, but hitting the Restart Iceweasal just causes it to
stop as above, and the add-on is never activated.
This used to work fine - probably a recent update to the program broke it.
-- Package-specific info:
-- Extensions information
Name: Adblock Plus
Location: ${PROFILE_EXTENSIONS}/{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Status: enabled
Name: Default
Location: /usr/lib/iceweasel/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}
Package: iceweasel
Status: enabled
Name: Echofon
Location: ${PROFILE_EXTENSIONS}/twitternotif...@naan.net
Status: enabled
Name: English (GB) Language Pack
Location: /usr/lib/iceweasel/extensions/langpack-en...@firefox.mozilla.org
Package: iceweasel-l10n-en-gb
Status: enabled
Name: Facebook Toolbar
Location: ${PROFILE_EXTENSIONS}/fire...@facebook.com
Status: enabled
Name: Firebug
Location: ${PROFILE_EXTENSIONS}/fire...@software.joehewitt.com
Status: enabled
Name: FirefoxNotify
Location:
/usr/share/mozilla/extensions/{ec8030f7-c20a-464f-9b0e-13a3a9e97384}/firefoxnot...@abhishek.mukherjee
Package: xul-ext-notify
Status: enabled
Name: Flagfox
Location: ${PROFILE_EXTENSIONS}/{1018e4d6-728f-4b20-ad56-37578a4de76b}
Status: enabled
Name: LinkChecker
Location: ${PROFILE_EXTENSIONS}/{49f3fc85-dcfe-4e42-9301-226ebe658509}
Status: enabled
Name: Test Suite Batch Converter (Selenium IDE)
Location: ${PROFILE_EXTENSIONS}/batch-converter_selenium-...@samit.badle
Status: enabled
Name: Total Validator
Location: ${PROFILE_EXTENSIONS}/valida...@totalvalidator.com
Status: enabled
Name: YSlow
Location: ${PROFILE_EXTENSIONS}/ys...@yahoo-inc.com
Status: enabled
-- Plugins information
Name: DivX® Web Player
Location: /usr/lib/mozilla/plugins/libtotem-mully-plugin.so
Package: totem-mozilla
Status: enabled
Name: Java(TM) Plug-in 1.6.0_22
Location: /usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/amd64/libnpjp2.so
Package: sun-java6-bin
Status: enabled
Name: QuickTime Plug-in 7.6.6
Location: /usr/lib/mozilla/plugins/libtotem-narrowspace-plugin.so
Package: totem-mozilla
Status: enabled
Name: Shockwave Flash
Location: /usr/lib/nspluginwrapper/plugins/npwrapper.libflashplayer.so
Status: enabled
Name: VLC Multimedia Plug-in
Location: /usr/lib/mozilla/plugins/libvlcplugin.so
Package: mozilla-plugin-vlc
Status: enabled
Name: VLC Multimedia Plugin (compatible Totem 2.30.2)
Location: /usr/lib/mozilla/plugins/libtotem-cone-plugin.so
Package: totem-mozilla
Status: enabled
Name: Windows Media Player Plug-in 10 (compatible; Totem)
Location: /usr/lib/mozilla/plugins/libtotem-gmp-plugin.so
Package: totem-mozilla
Status: enabled
-- Addons package information
ii iceweasel 3.5.16-1 Web browser based on Firefox
ii iceweasel-l10n 1:3.5.16+debia English (Great Britain) language package for
ii mozilla-plugin 1.1.3-1multimedia plugin for web browsers based on
ii sun-java6-bin 6.22-1 Sun Java(TM) Runtime Environment (JRE) 6 (ar
ii totem-mozilla 2.30.2-5 Totem Mozilla plugin
ii xul-ext-notify 1.5.4-4integrate Iceweasel/Firefox download message
-- System Information:
Debian Release: 6.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages iceweasel depends on:
ii debianutils 3.4.2 Miscellaneous utilities specific t
ii fontconfig2.8.0-2.1 generic font configuration library
ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib
ii libglib2.0-0 2.24.2-1 The GLib library of C routines
ii libgtk2.0-0 2.20.1-2 The GTK+ graphical user interface
ii libnspr4-0d 4.8.6-1NetScape Portable Runtime Library
ii libstdc++64.4.5-10 The GNU Standard C++ Library v3
ii procps1:3.2.8-10 /proc file system utilities
ii xulrunner-1.9.1 1.9.1.16-1 XUL + XPCOM application runner
iceweasel recommends no packages.
Versions of packages iceweasel suggests:
ii latex-xft-fonts 1.6.7-1 TrueType versions of some TeX font
ii libgssapi-krb5-21.8.3+dfsg-4 MIT Kerberos runtime libraries - k
pn mozplugger none (no description available)
ii ttf-lyx 1.6.7-1 TrueType versions of some TeX font
pn ttf-mathematica4.1 none (no description available)
ii xfonts-mathml 4Type1 Symbol font for MathML
pn xprint none (no description available)
Versions of
Bug#599129: gnuplot ignores the geometry command line option
I am tented to close this bug as a feature use in your gnuplot file set terminal x11 size xx yy Thank you -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#164097: Same Issue in links 2.1
Even though you may have solved your problem with elinks, but links seems to have the same problem in later versions as well. --- I created the file sup.html: htmlhead/headbody 2sup48/sup /body/html I opened it with links sup.html command, and links showed 248 instead of 2^48. (I have checked that sup tag in that file works with other browsers.) --- I was running Debian 5.0.7 (lenny) with Linux Kernel 2.6.26-2-686. Versions of the packages are: sh-3.2$ dpkg -l | egrep 'links|libc6|libgpm2|libssl0.9.8|zlib1g' ii libc62.7-18lenny6 GNU C Library: Shared libraries ii libc6-dev2.7-18lenny6 GNU C Library: Development Libraries and Hea ii libc6-i686 2.7-18lenny6 GNU C Library: Shared libraries [i686 optimi ii libgpm2 1.20.4-3.1 General Purpose Mouse - shared library ii libssl0.9.8 0.9.8g-15+lenny9 SSL shared libraries ii links2.1pre37-1.1 Web browser running in text mode ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime --- Aras Ergus -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#487125: Lost interest in adopting apt-rdepends
2010/12/1 Axel Beckert a...@debian.org: Hi Bastien. Bastien ROUCARIES wrote: I'm also willing to sponsor this package, but I'm not sure if I would co-maintain it. If you sponsor me I can maintain it and merging some ubuntu improvment. Will do. Thanks. Regards, Axel -- ,''`. | Axel Beckert a...@debian.org, http://people.debian.org/~abe/ : :' : | Debian Developer, ftp.ch.debian.org Admin `. `' | 1024D: F067 EA27 26B9 C3FC 1486 202E C09E 1D89 9593 0EDE `- | 4096R: 2517 B724 C5F6 CA99 5329 6E61 2FF9 CD59 6126 16B5 Do you want me to add as a maintener on the git tree ? Bastien -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590589: plasma-widget-networkmanagement: Applies to plasma widget, too
On Wed, Dec 22, 2010 at 01:23:21PM +0100, SirJective wrote: This also applies to the plasma network management widget. Yes. When the network-manager daemon is started after having previoulsy been stopped, the NetworkManager User Settings Service crashes and has to be restarted from the Service Manager in KDE's System Settings. Here (on 4.5.3 from qt-kde.debian.org) KDE Daemon (kdeinit4) crashes with a DrKonqi dialog and then it immediately automatically restarts. The widget itself stays around though, and will reconnect Yes. -- WBR, wRAR signature.asc Description: Digital signature
Bug#528861: Help figuring out why ksh is not building
ksh is not building on mips or mipsel. From what I can see from the build logs, it looks like certain headers are not getting included or not getting included correctly, but I don't have access to a mips or mipsel machine. The maintainer has been unable to reproduce the problem under qemu. debian-mips, could one of you please look into this to see what the problem might be? -- brian m. carlson / brian with sandals: Houston, Texas, US +1 832 623 2791 | http://www.crustytoothpaste.net/~bmc | My opinion only OpenPGP: RSA v4 4096b: 88AC E9B2 9196 305B A994 7552 F1BA 225C 0223 B187 signature.asc Description: Digital signature
